Who has the most slots at home ?

[delma]

Kirk,

What is that machine to the left on your pic?

[Bettor Slots]

Delma,

Just go to this link to learn more about that machine.



www.bettorslots.com/MUSICAL-CHERRIES.html

[jay]

Delma,

I think the layout depends on what space you have available. If you have a floor plan to post I am sure some of the guys would have some cool ideas.

In finishing mine I ran lots of electrical. It might be over kill but I ran 1 breaker per wall for the floor outlets. I then ran a seperate set of outlets at the 7ft level.
At the 7ft level I have my neon bar signs plugged in, and my progressives. For the four walls I ran two breakers. Lighting is on a separate breaker.
I don't ever think I will use that much power but its not that much extra money. Escentially I did 7 home runs (runs back from the room to the breaker panel) where most people would do no more than 3. So at about $30 per spool of wire the added cost was $120 (for 4 extra spools) and about $70 for extra breakers.

I may (or may not) put a hot tub outside so I ran #6 wire from the panel to the back of the house and left it coiled in a weather proof box. I also did the same with a regular run of 120v. I did not bother to install the breakers but left a pile of it coiled up by the breaker panel to connect at some future date. This way when I installed my drywall ceiling I knew I would never have to pull it out again.

I also have home theater - 120" projection. I ran 2 x 25ft HDMI cables from the projector. I am only using one.  I have a high end harmony universal remote and use a wireless extender. This is basically a little LED adapter that sits over the eye on each peice of my stereo equipment. I ran one of these from the projector back to the rest of my equipment. This allows me not to have to point my remote at anything specific. The rest of the equipment is behind a wall so its important to have these eye adapters run.

I ran 20g speaker wire to anywhere I thought I might want a speaker. The system is a 7.1 but If I was ever to connect up a speaker to each one it would be more like a 18.1 system. Powered Subwoofers like to use sheilded cable so I ran coax to about 5 locations along side my speaker wire.

If you are looking for wall plates (for speakers), electric screens, in wall speakers, speaker wire, HDMI cables, wall bracket or other home theater do-dads I would strongly recommend www.monoprice.com and/or www.trianglecables.com saved me a fortune vs going to places like Radio Shack, Best buy or most retail locations.

[jdkmunch]

I'm still around 23 machines at this time. The number fluctuates as I sell one here and there, but soon replace it with another....

Kirk they look great!   May I ask -  do you keep them on all the time?

[KirkLasVegas]

#20 is a tad small...unless it's a 25 or 70 volt speaker system.....
If you look at the picture I have of the "theater" you will see a 5 foot tall JBL subwoofer.
I ran the lowlevel signal to it and put the amplifier on top of it. It requires around 400 watts
to begin to work correctly, likes 1200 watts of power.
It's a very old JBL theater box.It's on the 3rd floor, but you can feel it on all floors and next door

[KirkLasVegas]

I'm still around 23 machines at this time. The number fluctuates as I sell one here and there, but soon replace it with another....

Kirk they look great!   May I ask -  do you keep them on all the time?

Thanks
I run them on weekends for a few hours here and there, but the rest of the time they are asleep...

[jdkmunch]

That's cool - that's exactly what I do too -   except for the reel touch   - that stays on 99% of the time.  The only down times are when I'm playing with the motherboard or hard drive.

[Thor777]

Delma,

Just go to this link to learn more about that machine.



www.bettorslots.com/MUSICAL-CHERRIES.html

Now THAT is different    What a unique machine!

[jdkmunch]

Delma,

Just go to this link to learn more about that machine.



www.bettorslots.com/MUSICAL-CHERRIES.html" target="_blank">www.bettorslots.com/MUSICAL-CHERRIES.html

Now THAT is different    What a unique machine!

It is right!  It's like deal or no deal circa 1990.   I was in the flamingo recently and found so many old games that they were new again!

Maybe that's the casino's plan - keep the machines so long that people forget about the old games and think that there new again.

[KirkLasVegas]

Reborn from the dead.....

The old "Pinball" Vision is now a Double Diamond Deluxe bonus wheel (I forgot to change the reel glass)
I have to polish up the door, install the bezel around the bill acceptor,install the round
bonus spin button..... but it's mostly complete
The Double Diamond Deluxe S+ is for a customer. it WAS a
"Rapid Jackpot" 4 coin in machine I had out in the garage. I think she will
be happy......

[jdkmunch]

That's a nice BlueBird in the bottom pic!
 

[PWRSTROKE]

Nice BB.  The topic here is " Who has the most slots at home?".  I know for sure it isn't me-- .  Merry X-mas.  B.  .

[jdkmunch]

Well you could say that 1 BB is equal to 12 Bally 6000 machines.  At least in price. 

[PWRSTROKE]

I do not even know about that munch.  Some people can buy a s-6000 depending on bulk etc. but usually no more than 75.00 bucks each.  so 12 x 75.00 is not going to get you a Bird- .  B.

[jdkmunch]

Your right - I was going on 400 per machine.   

[PWRSTROKE]

Kirk,  Was that the one you got at a pawn shop or was it one of those i-games you have- ,  I forgot.  Perhaps the BB was a X-Mas gift from one of your buddies   .  Merry X-mas,   .  B.

[PWRSTROKE]

Munch,  4800.00 clams is more in the ball park.  I know where some of these are at for 500.00 each;  Only hitch is you have to spend about 30k in misc. langyappe to get them--(other machines).   .  They Usually always will have some "Pot-Sweetners" in a casino auction etc..  Then when you do get them all there is absoultley no gurantee on what you are exactly getting--This can be expensive and costly in my opinion.  Just my .0001 half cent-- .  B.

[KirkLasVegas]

The BB was from a "SuperPawn" here in Vegas. I paid $2800 for it. Shop owner figured it was broken, he didnt know that a BB takes the better part of 10 minutes to finally decompress the Linux files and kernal and finally boot up.
I offered to simply take that dead machine off his hands.
I'm a "Giver"  what can I say. I bet he laughed all night
about dumping that dead machine on that old guy
BTW, it did need a hopper over-run cleared.....

[jdkmunch]

Is that the place on Pawn Stars on the history channel?

[KirkLasVegas]

Is that the place on Pawn Stars on the history channel?

Naw, Pawn stars is fake, just like repo man and cheaters....its all staged

[jdkmunch]

I think it's real.  There's talk about huge lines now because of the show.  The place is supposed to be a dump too.

Gold & Silver Pawn Shop
(702) 385-7912
713 Las Vegas Blvd S
Las Vegas, NV 89101

[KirkLasVegas]

The program" Cheaters" with slimeball Joey Greko got busted when he was SUPPOSEDLY assaulted (Knifed) during a episode of "Cheaters"
Where they made their mistake was ALL incidents with a local police dept become public in a hurry. When a inquiry was made into getting a copy
of the "Report", the local police dept. HAD NOTHING,ZERO,ZILCH,NADA.Neither did the local fire dept, rescue ambulance companies. On TV he was a bloodied
mess.
The conclusion, IT NEVER HAPPENED
CSI Vegas.....a few shots are used over and over, but CSI vegas is shot in LOS ANGELES!!!
Most pawn shops are a total ripoff. if you ever see a pawn slip, you will be blown away by the interest, usually between 100 and 300 PERCENT! If you borrow $10 for a month, you will pay close to $21 (Hock an item worth $10).
"Repo Man" is fake, i watched a episode(Supposedly) in Los Angeles. They called the officers "LAPD", BUT....the uniforms were inaccurate, the cars were not "LAPD issue" vehicles, clearly studio cars all the way. The handheld radios were not the correct issue. I worked LA for 22 years, I should know.
So...Cheaters is fake, Repo man is fake...I highly suspect Pawn Stars is fake too. Watch the credits at the end of the show, see if they thank the local store....



Kirk

[PWRSTROKE]

Kirk,  You are rite there in the "Hub" in vegas so you should know.  Nice Games you have anyway for sure no matter how you got them- .  B.  .

[KirkLasVegas]

Thanks Barry,
i'm lucky, a lot of the people here in Vegas are quite easy to work with.With the flood of machines here, getting something nice is pretty easy.
Parts are pretty easy to locate too....



Kirk

[PWRSTROKE]

Kirk,  I agree with you.  You are virtually in the middle of "eden" as far as machines/parts goes from what I have seen.  Your games etc. can give us enjoyment and hope here and elsewhere for others.  Thanks-B777  K+