Welcome, Guest. Please login or register.
May 14, 2024, 11:41:25 PM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  **Reel Slots** Gaming Machines
| |-+  Bally Reel Games. (Moderator: a69mopar)
| | |-+  Bally S5500 RAM Clear and set up instructions needed. HELP		 0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: Bally S5500 RAM Clear and set up instructions needed. HELP  (Read 9813 times)
azvictorigt
Guest
« on: August 14, 2010, 03:41:57 AM »
Hi, can anyone tell how to due a clear ram and reset for the Bally S5500 slot machines.  I have the U12 and U15 chip set, but this is my first time resetting and programming one of these units, and do not have the ram clear and set up instructions.  I am use the process for the IGT models, but this Bally process  is new to me.  Thanks for any help... Help
Logged
reho33
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 146
Offline Offline

Gender: Male
Posts: 1594


Slot Losers of America / Tokie Owens
« Reply #1 on: August 14, 2010, 03:48:40 AM »
There is a jumper that is close to the front of the reel tray on the right side marked "CLEAR" (if your chips support it). If you move the jumper to closed and the hold the pseudo coin and test buttons in while powering up, hold them in and you will see CL C and flashing. Then power off and move the jumper off again and power up.
Logged
** NOTE: The information contained in any of my posts relating to slot machine ownership and use is information that I have gathered from publicly known sources correspondingly under the same protections of Free Speech governed under the Laws of the United States and Canada and is for informational use only. As is my Constitutional Right under United States and Canadian Laws the redistribution of said information is considered a form of free speech. Using this information in the United States or Canada to conduct illegal gambling in states/provinces where it is unlawful has been declared against the law in those states/jurisdictions and as such I do not advocate the illegal use of such information under both the United States and Canadian Laws. All references and examples of personal experiences are hypothetical in nature, and it is up to you to determine if the information presented is applicable to your situation or not**
azvictorigt
Guest
« Reply #2 on: August 14, 2010, 04:58:59 AM »
Thanks for the info, but your a little ahead of me. How do I use the u12 and u 15 chip.  First time doing this. I am going to do a ram clear and reset such as denom and Bill validator programming. Any help would be appreciated it.  Thanks alot
Logged
jdkmunch
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 624
Offline Offline

Gender: Male
Posts: 2640
« Reply #3 on: August 14, 2010, 09:27:00 AM »
I thought for a 5500 you didn't need chips.  Just set the jumper and press pseudo and test like reho said.  Try this first.

 If you do have a set of mains that require clear chips then just replace the mains with the clear chips and press the pseudo and test.


It's pretty easy.
Logged
Pages: [1] Go Up Print 
« previous next »
Jump to:  

SimplePortal Classic 2.0.5

If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com ™    Newlifegames.net ™    Newlifegames.org ™
   New Life Games ™    NewLifeGames ™  NLG ™ We Bring new Life to old Games ™    1-888-NLG-SLOTS ™
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.098 seconds with 19 queries.