New Life Games Tech Forums

I am converting over a 3 reel s2000 to a 4 reel (super stars spin) I have the 4 reel shelf installed and I'm pretty sure the two connectors on the rear right of the reel shelf are hooked up correctly, problem is that I have (2) 12 pin connectors, one male one female remaining on the rear left od the reel shelf. Can someone tell me where these should connect?

Thanks,

David

step by step instructions here ...http://newlifegames.net/nlg/index.php?topic=11362.0 (http://newlifegames.net/nlg/index.php?topic=11362.0) It daisy chains off the mother board netplex connector

so this bonus wheel picture shows where to plug in one of the two connectors on the left rear? Do I disconnect one that is already in place to plug my 4 reel harness connector? My machine is the long reel glass type so i don't think I have to do the other adjustments, do I?

Thanks

Yes, unplug existing connector from mother board and plug into bonus wheel plug, plug other bonus wheel plug into mother board. that is all it takes and Netplex will pick it up on bootup

thank you for your help

Did you get it working ???

took a break for a minute, about to go try to finish it after dinner.

Any questions...ask away !!

The 5 reel controller board that you said to exchange with my exising one, is it directly behind the bill acceptor attached to the back wall under a metal plate?

Yes

I just did one of these a few weeks back and ran into a pesky reel error on start up.  After a few hours of total frustration  :279- trying to clear the error, I came across an old post on "How to clear error: AUX REELS DISCONNECTED."  I don't know how to put in a link to it, but you can do a search on the text.  If you run into this error, this will save you some time.  Jack

My message upon power up says "reels disconnected" noe aux reels disconnected, is there a way to fix this?

Covered here...Jump the connector in the picture

the connector that has 2 wires, green with a white trace and a black with a red trace? short it with what?

I just made a jumper.

goes behind the 1st reel? at the cpu board?

Connect the green to the black. Jumper..twist together or scotch lock connector. Use your imagination !! :88- :200-

ALL this data should be in the archives. Great work in helping him coors I and some others get tired of posting the same data over and over. K+, You have the floor on this one.  We are all here to help If it was needed,  B.

Thanks B.  Just glad to return it when I can!!   :88- :88- :88-

Thanks for all your help guys, I got the machine up and going. One last question though, can I not set the multimedia sounds up for enhanced-preferred? all I am getting is the standard s + ding ding ding sounds on rollup and the standard reel spin sounds.

You'll need a multimedia board and sound simm to get enhanced soundss. If you already have that go to menu 3.0 and adjust sound options :37-

I have the multimedia board in there with simm svs00058, just when I get to the multimedia menu, it won let me change the roll up sounds or the spin reels sounds to enhanced. Do I need a special sb chip for this to work?

Which SB chip are you using?

SB101122

That's the same as I have in my Super Star Spin.
SB101122
SG000399
VS011GX1
DSV00058

Is there no way to get the enhaced rool up and reel soin sounds then?

If you don't get answer before tonight I'll check my machine when I get home and see
what my settings are.
Ford

ok, thanks

They only sound like my machine in this video.

http://www.youtube.com/watch?v=Z3nIxp4tf9s&feature=player_embedded#at=12 (http://www.youtube.com/watch?v=Z3nIxp4tf9s&feature=player_embedded#at=12)

This is what my SSS sounds like also

ok, that what mine sounds like so I guess there is no enhanced sounds available for that game

I checked. I do not have enhanced sound

Is there an option in the menus under "Sounds"for enabling the enhanced sounds?
Maybe you have to go in there and turn it on by a combination of the spin button
and reset key beginning with pressing the little white test button.

No. Enhanced does not come up.

Right...but you may be only seeing "Legacy Sounds" displayed there...
If you press the "Spin" button, and then the "Cashout" button...it should move you through
a sub-menu in the "Machine Sounds" menu and you will get:
" [None], [Legacy Sounds], and [Enhanced Sounds]" as settings options?

There is no enhanced sound for this game, Just the words it yells out. Also only an 8 meg simm

My Big Times Pay (3-reel plus bonus reel S2000) game is the same way -- only boring S+ -like reel spin sounds, even with the correct SIMM.