|
Title: Williams board shows red Fail bulb Flashing Post by: iceman_2001 on June 05, 2011, 03:27:54 PM I have a williams 360 machine and I moved the machine from one place to another. Before the move the game was working properly and after the move it does not work. Whenever I try to power it on I see the red Fail bulb flashing. Monitor and bill acceptor work but the game does not start.
Also on another game that I moved and was working fine, after the move it had a System Error 13. I tried to Ram Clear it and first it said that it had a dead Battery. I replaced the 3.6 v battery and tried to do the Ram Clear. It apparently works because I can select the options with no problems and I see the Successful Ram Clear Screen and hear only one dong, but when I try to power the game the same System Error 13 appears. Title: Re: CRITICAL SYSTEMS ERROR 13 (was red bulb flashing) Post by: mjwchevy on October 14, 2011, 05:35:11 PM I've got the exact same problem on a 1.5+ board that I just repaired.
It was 100% dead previously - after repairing some broken solder joints and a bad XU3 socket I'm able to clear using the v4.32 Unified Clear - but as soon as I load the XU3 EPROM back in and boot I get the following on the top of the screen: DIVIDE BY ZERO AT 6000:0252,F046,0090,0000,0FC4,8CA3,6269,FFFF,0000 Critical System Error 13 Title: Re: Williams board shows red Fail bulb Flashing Post by: thundering on October 15, 2011, 12:58:32 PM Jackpot Party problem
says clear error-call attentent has 1 credit will not clear any help will be appreciated Title: Re: Williams board shows red Fail bulb Flashing Post by: Slotmaster on October 15, 2011, 01:54:12 PM I've got the exact same problem on a 1.5+ board that I just repaired. Dead or low batt is the answer to this problemIt was 100% dead previously - after repairing some broken solder joints and a bad XU3 socket I'm able to clear using the v4.32 Unified Clear - but as soon as I load the XU3 EPROM back in and boot I get the following on the top of the screen: DIVIDE BY ZERO AT 6000:0252,F046,0090,0000,0FC4,8CA3,6269,FFFF,0000 Critical System Error 13 Title: Re: Williams board shows red Fail bulb Flashing Post by: Slotmaster on October 15, 2011, 01:54:41 PM Jackpot Party problem Almost the same issue, repalce batt and clearsays clear error-call attentent has 1 credit will not clear any help will be appreciated Title: Re: Williams board shows red Fail bulb Flashing Post by: thundering on October 20, 2011, 08:21:46 PM replaced battery on jackpot party
now says TILT invalid ram clear.... any idea what I can do next? Title: Re: Williams board shows red Fail bulb Flashing Post by: Slotmaster on October 21, 2011, 11:04:52 AM You need to install the Ram clear chip and clear the ram, if you need one send me a PM
After the clear you will be ready to go. Use the jackpot reset key to get past the hot dog screens (messages) after clear |