Welcome, Guest. Please login or register.
November 23, 2024, 05:47:21 PM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  **Video Slots** Gaming machines
| |-+  WMS WILLIAMS. (Moderator: tacman)
| | |-+  Williams board shows red Fail bulb Flashing		 0 Members and 2 Guests are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: Williams board shows red Fail bulb Flashing  (Read 4904 times)
iceman_2001
Guest
« on: June 05, 2011, 03:27:54 PM »
I have a williams 360 machine and I moved the machine from one place to another. Before the move the game was working properly and after the move it does not work. Whenever I try to power it on I see the red Fail bulb flashing. Monitor and bill acceptor work but the game does not start.

Also on another game that I moved and was working fine, after the move it had a System Error 13. I tried to Ram Clear it and first it said that it had a dead Battery. I replaced the 3.6 v battery and tried to do the Ram Clear. It apparently works because I can select the options with no problems and I see the Successful Ram Clear Screen and hear only one dong, but when I try to power the game the same System Error 13 appears.
Logged
mjwchevy
Guest
« Reply #1 on: October 14, 2011, 05:35:11 PM »
I've got the exact same problem on a 1.5+ board that I just repaired.

It was 100% dead previously - after repairing some broken solder joints and a bad XU3 socket I'm able to clear using the v4.32 Unified Clear - but as soon as I load the XU3 EPROM back in and boot I get the following on the top of the screen:

DIVIDE BY ZERO AT 6000:0252,F046,0090,0000,0FC4,8CA3,6269,FFFF,0000

Critical System Error 13

* WMS Crit 13.JPG (423.79 KB, 1296x968 - viewed 516 times.)
Logged
thundering
Guest
« Reply #2 on: October 15, 2011, 12:58:32 PM »
Jackpot Party problem

says clear error-call attentent
has 1 credit will not clear

any help will be appreciated
Logged
Slotmaster
Contributing Gold NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 172
Offline Offline

Gender: Male
Posts: 532
« Reply #3 on: October 15, 2011, 01:54:12 PM »
Quote from: mjwchevy on October 14, 2011, 05:35:11 PM
I've got the exact same problem on a 1.5+ board that I just repaired.

It was 100% dead previously - after repairing some broken solder joints and a bad XU3 socket I'm able to clear using the v4.32 Unified Clear - but as soon as I load the XU3 EPROM back in and boot I get the following on the top of the screen:

DIVIDE BY ZERO AT 6000:0252,F046,0090,0000,0FC4,8CA3,6269,FFFF,0000

Critical System Error 13


Dead or low batt is the answer to this problem
Logged
Slotmaster
Contributing Gold NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 172
Offline Offline

Gender: Male
Posts: 532
« Reply #4 on: October 15, 2011, 01:54:41 PM »
Quote from: thundering on October 15, 2011, 12:58:32 PM
Jackpot Party problem

says clear error-call attentent
has 1 credit will not clear

any help will be appreciated
Almost the same issue, repalce batt and clear
Logged
thundering
Guest
« Reply #5 on: October 20, 2011, 08:21:46 PM »
replaced battery on jackpot party
now says

TILT
invalid ram clear....

any idea what I can do next?
Logged
Slotmaster
Contributing Gold NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 172
Offline Offline

Gender: Male
Posts: 532
« Reply #6 on: October 21, 2011, 11:04:52 AM »
You need to install the Ram clear chip and clear the ram, if you need one send me a PM

After the clear you will be ready to go.   

Use the jackpot reset key to get past the hot dog screens (messages) after clear


 
Logged
Pages: [1] Go Up Print 
« previous next »
Jump to:  

SimplePortal Classic 2.0.5

If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com ™    Newlifegames.net ™    Newlifegames.org ™
   New Life Games ™    NewLifeGames ™  NLG ™ We Bring new Life to old Games ™    1-888-NLG-SLOTS ™
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.091 seconds with 20 queries.