|
Title: I game denomination change Post by: azvictorigt on March 14, 2010, 02:48:46 AM I have a 3902 board and I also have the 22 key. Am I required to have another key to change the denomination from nickels to pennies? I was under the impression when you do a clear ram reset with the 22 key, it requires you to pick your denomination settings. Any help would be appreciated.
Title: Re: I game denomination change Post by: KirkLasVegas on March 14, 2010, 03:03:03 AM I have a 3902 board and I also have the 22 key. Am I required to have another key to change the denomination from nickels to pennies? I was under the impression when you do a clear ram reset with the 22 key, it requires you to pick your denomination settings. Any help would be appreciated. This is your chance to set it up multi-denom.... Set the BASE to 0.01 Set the rest of the stuff up. SAVE the settings. Select Multi-Denom Turn ON 0.01, 0.05, and the rest of the ones you want active When your done with that go into game setup Set up the max bets for each denom... Dont forget to set up EVERYTHING before you back out of the key menu! I usually set it up in this order Credit/Base Denom Multi denom Game/options hopper/handpay Max bets Clock Sound You dont have to do them in this order (except the base denom) You get ONE shot at this, get it right or you will have to clear it again... Kirk Title: Re: I game denomination change Post by: azvictorigt on March 14, 2010, 03:32:35 AM Great stuff Kirk. Thanks. Ill try it tomorrow in the order you told just to be safe. One more hopefully simple question. When you are talking about setting it to 0.01 and. .0.05. Your a little ahead of me.
This is what I have done to his point. I removed base chip and installed 22 key. I turned machine on and it gave me the 3 different options as to clear ram before reboot etc. I said yes to the first top option It then asked me to put base chip back in and reboot. Unless I am misunderstanding the instructions When I turned itback on, it gave the eprom and cmos erorrs. I got through all that. Then it showed me the nickel denomination in the center and asked me to verify all settings before activating the game. I thought I did it right but I pressed the self test switch and went togame optons to set denomination but received same message. (Requires chip to change this option) Obviously I missed or skipped quite a few steps. Can you see were I went wrong Any advise. Did I pick the correct option on the ram clear instructions. Any final pointers. Much appreciate it Title: Re: I game denomination change Post by: KirkLasVegas on March 14, 2010, 03:58:33 AM Great stuff Kirk. Thanks. Ill try it tomorrow in the order you told just to be safe. One more hopefully simple question. When you are talking about setting it to 0.01 and. .0.05. Your a little ahead of me. This is what I have done to his point. I removed base chip and installed 22 key. I turned machine on and it gave me the 3 different options as to clear ram before reboot etc. I said yes to the first top option It then asked me to put base chip back in and reboot. Unless I am misunderstanding the instructions When I turned itback on, it gave the eprom and cmos erorrs. I got through all that. Then it showed me the nickel denomination in the center and asked me to verify all settings before activating the game. I thought I did it right but I pressed the self test switch and went togame optons to set denomination but received same message. (Requires chip to change this option) Obviously I missed or skipped quite a few steps. Can you see were I went wrong Any advise. Did I pick the correct option on the ram clear instructions. Any final pointers. Much appreciate it Say YES to ALL options :) then let it reboot..... Title: Re: I game denomination change Post by: cruisepl on March 14, 2010, 01:22:43 PM Great stuff Kirk. Thanks. Ill try it tomorrow in the order you told just to be safe. One more hopefully simple question. When you are talking about setting it to 0.01 and. .0.05. Your a little ahead of me. This is what I have done to his point. I removed base chip and installed 22 key. I turned machine on and it gave me the 3 different options as to clear ram before reboot etc. I said yes to the first top option It then asked me to put base chip back in and reboot. Unless I am misunderstanding the instructions When I turned itback on, it gave the eprom and cmos erorrs. I got through all that. Then it showed me the nickel denomination in the center and asked me to verify all settings before activating the game. I thought I did it right but I pressed the self test switch and went togame optons to set denomination but received same message. (Requires chip to change this option) Obviously I missed or skipped quite a few steps. Can you see were I went wrong Any advise. Did I pick the correct option on the ram clear instructions. Any final pointers. Much appreciate it Say YES to ALL options :) then let it reboot..... If your switching your CC to accept pennies make sure you remove the counterweight from the comparitor. You should also remove it if you ever want to use dimes. The weight of these coins sometimes causes jams or coins not to register. Jim at Bettor Slots showed me this trick on my dime machine and I did to my penny machine when I noticed problems. Title: Re: I game denomination change Post by: azvictorigt on March 14, 2010, 02:09:49 PM Thanks for the info I am going to make it a base of 0.01 an set it for multi denomination. I let you know how it goes
Title: Re: I game denomination change Post by: azvictorigt on March 14, 2010, 09:49:08 PM Your instructions worked great. Thanks again..
Title: Re: I game denomination change Post by: KirkLasVegas on March 14, 2010, 10:08:06 PM Your instructions worked great. Thanks again.. Always glad to help :) Kirk Title: Re: I game denomination change Post by: stayouttadabunker on March 14, 2010, 10:10:03 PM Let's pass the good kudos + all around guys! Good job! :3- :3- :3-
|