|
Title: WMS Jackpot stampeed steeling my bills! Post by: joshmail on April 27, 2010, 02:11:44 AM Hello,
I live in Phoenix AZ, I had the One Arm Gambler out 2 weekends in a roe to fix my bill validator on my WMS Jackpot stampeed deluxe dot-matrix display, they sent Otis ( nice guy) but, no luck. They got it to take the bills but does not give me credits! Any ideas before I call this j** a**'s to come out again? They will be doing it for free and I want it fixed right this time! OH and thoes are Fuzzy Dice from the Excalbur in Vegas. Not yatzee, LOL. Title: Re: WMS Jackpot stampeed steeling my bills! Post by: ashyron on April 27, 2010, 10:43:37 AM Hello, I live in Phoenix AZ, I had the One Arm Gambler out 2 weekends in a roe to fix my bill validator on my WMS Jackpot stampeed deluxe dot-matrix display, they sent Otis ( nice guy) but, no luck. They got it to take the bills but does not give me credits! Any ideas before I call this j** a**'s to come out again? They will be doing it for free and I want it fixed right this time! OH and thoes are Fuzzy Dice from the Excalbur in Vegas. Not yatzee, LOL. I had an issue with mine a while back. It would take my bill and then just sit there. I had to unplug the bill acceptor and plug it back in to get my money back. Never worked with bills, just coins. Anyway, once I replaced that board with a good working one, my Stampede Deluxe worked just fine and still works now. I would suggest telling them to try replacing the I/O board with a known good board. It's the upper board; the board with the 5 red LED's on it. There might be a juristiction issue if they do that so a ram clear should take care of that. Please let us know if they get it fixed and what the problem was. Title: Re: WMS Jackpot stampeed steeling my bills! Post by: joshmail on May 02, 2010, 06:03:03 PM Thanks for the info,
I will tell them, they wher just out again W/no luck....... I just rembered this thred so I will pass the info on and see what happens. Thanks. Jsoh. Title: Re: WMS Jackpot stampeed steeling my bills! Post by: ashyron on May 03, 2010, 04:28:33 AM UGH.... Do I have to come over and do it myself?? :97- just kidding. Heck, I even replaced the entire bill validator and assemby and harnesses and anything that went with it. I really think the I/O board is going to be your issue.
Title: Re: WMS Jackpot stampeed steeling my bills! Post by: joshmail on May 03, 2010, 07:36:17 PM Thanks,
Another question. If I shake the machine ( not like i shake it on propose) but. If I pull the handle and watch the dotmation screen at the same time you can see it jiggle a little. Just like a little wobble back and forth. Should it be rock solid tight? The screen shows the display perfect the hole time, but I read on another thread that the ribbon ( discribed as Christmas wrapping paper) that supplies the dotmation display becomes brittle and black lines start to show on the screen if it breaks. I was worried this wobble could jeopardize the ribbon. Also over all how dependable is this machine? I have a hand full and this one cool as it is seams to be giving me the most trouble. Thanks again. |