Welcome, Guest. Please login or register.
November 23, 2024, 02:44:18 AM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  **Reel Slots** Gaming Machines
| |-+  IGT S2000 and Vision Games.
| | |-+  Netplex link down flashes continuously IGT S2000 enhanced board		 0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: Netplex link down flashes continuously IGT S2000 enhanced board  (Read 12441 times)
luckystrike
Contributing NLG Member
New NLG Member 1 to 100 Post
*

Total Karma Storms: 12
Offline Offline

Gender: Male
Posts: 27
« on: February 28, 2011, 11:56:11 PM »
Has anyone experienced this?  I have had two boards do this on two different five reel slots.  The games played fine for a few weeks and went to turn them on one day and the vfd flashes netplex link down continuously at one second intervals.  I get one amber and one red led that flash on the board at the same time as I see the netplex down on the vfd.  I have tried installing these boards in different machines replacing all of the chips out a known working game and get the same results.  Is this the right clear chip for this or does anyone know what else may cause this?  I'm going bald scratching my head trying to figure this one out.  Any ideas would be greatly appreciated.
Thanks in advance. Scratch Head
« Last Edit: March 01, 2011, 02:25:00 AM by luckystrike » Logged
luckystrike
Contributing NLG Member
New NLG Member 1 to 100 Post
*

Total Karma Storms: 12
Offline Offline

Gender: Male
Posts: 27
« Reply #1 on: March 01, 2011, 02:28:10 AM »
Bob (Raz410) mailing a new clear chip tomorrow.  I'll post if this solves the issue.  Thanks again Bob.
Logged
IFFV68
Contributing NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 32
Offline Offline

Gender: Male
Posts: 784
« Reply #2 on: March 04, 2011, 12:59:03 AM »
I had the same problem & had to replace the Power supply, mine was under warranty.
Then it started right up.
Logged
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447
« Reply #3 on: March 04, 2011, 02:50:46 AM »
"....a new clear chip tomorrow"  ...whoo boy... Silly Me! Duh!
I can't wait for the next set of posts.
Logged
luckystrike
Contributing NLG Member
New NLG Member 1 to 100 Post
*

Total Karma Storms: 12
Offline Offline

Gender: Male
Posts: 27
« Reply #4 on: March 04, 2011, 03:46:31 AM »
I checked the power supply and it is good.  I did get one board going with a different IVC224 chip but still have one that will not clear.  When I power it up with the clear chip the top amber light flashes on the board. 
Logged
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447
« Reply #5 on: March 04, 2011, 04:07:17 AM »
You are supposed to get 2 amber lights on steady...
only one single amber light flashing or continuously on - is a trouble code.
Logged
Bettor Slots
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 751
Offline Offline

Gender: Male
Posts: 1946



WWW
« Reply #6 on: March 04, 2011, 04:22:51 AM »
Very likely your main computer board went bad.
Logged
If life is like a box of chocolates....why do I always seem to end up with the butter creme?
Bettor Slots
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 751
Offline Offline

Gender: Male
Posts: 1946



WWW
« Reply #7 on: March 04, 2011, 04:38:20 AM »
Hey, any chance these are 504rB boards made by Keytronics?  And if so can you test the output on your your green battery near the heat sink?
Logged
If life is like a box of chocolates....why do I always seem to end up with the butter creme?
idesign
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 509
Offline Offline

Gender: Male
Posts: 1456


If it aint broke why mess with it?????
« Reply #8 on: March 04, 2011, 10:26:09 AM »
Quote from: Bettor Slots on March 04, 2011, 04:38:20 AM
Hey, any chance these are 504rB boards made by Keytronics?  And if so can you test the output on your your green battery near the heat sink?

You may be onto something Jim.  I haven't tried it but someone else told me that on 504 rev B boards if you remove the green battery, the machine reports an unclearable error, unless it's replaced.  Bottom line, don't remove the green battery on 504 rev B boards.
Logged
Tilt
Contributing Gold NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 366
Offline Offline

Gender: Male
Posts: 724
« Reply #9 on: March 04, 2011, 01:29:13 PM »
I have four 504 rev b boards running without the nicad battery and haven't had any problems with them.  None of them are the newer Keytronics boards though.  I got one of them recently, but haven't put it in use yet.  I'll check it out this weekend.  As a standard practice I install a coin cell battery holder with a new CR2354 battery and remove the leak prone green nicad.
Logged
cowboygames
Abbys Dad
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 680
Offline Offline

Gender: Male
Posts: 3916


Happiness in life is a great dog
« Reply #10 on: March 04, 2011, 01:41:38 PM »
I've also pulled the green nicads off my 504b boards and they work fine. the one board is an obvious "b" board made in China by IGT. My keytronics b board was made in Mexico, but even though it has a b board tag it is obviously a 504a board with the IGT  b board upgrading. Both work though...
Logged
jer3270
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 20
Offline Offline

Posts: 192
« Reply #11 on: March 04, 2011, 06:25:44 PM »
Here's my 2 cents. I had this same problem and with the help from everybody on here and SAMRON slot's it came to be a bad memory chip on the board. (The one's with the little black backpack on them) was the way it was explained to me! rotflmao The game has been working ever since I replaced them!
Logged
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447
« Reply #12 on: March 04, 2011, 06:32:03 PM »
lol "a little backpack on them"....whoo boy!  rotflmao bust gut laughing Cry Laughing

I love Fridays!  Tongue Out

The "backpackers" are RAM chips I think.... yes
Logged
Buzz
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1158
Offline Offline

Gender: Male
Posts: 4641
« Reply #13 on: March 04, 2011, 06:45:31 PM »
Quote from: idesign on March 04, 2011, 10:26:09 AM
Quote from: Bettor Slots on March 04, 2011, 04:38:20 AM
Hey, any chance these are 504rB boards made by Keytronics?  And if so can you test the output on your your green battery near the heat sink?

You may be onto something Jim.  I haven't tried it but someone else told me that on 504 rev B boards if you remove the green battery, the machine reports an unclearable error, unless it's replaced.  Bottom line, don't remove the green battery on 504 rev B boards.

Jeff    I to have removed the green bat. from a 504 with success.  Blueridge told me not to remove the Battery from the enhanced 2701 board. I had to test him and he was right. It won't work with out the battery!!!! 
« Last Edit: March 04, 2011, 07:17:21 PM by Buzz » Logged
NLGs Motto  " IF IT AIN'T BROKE GIVE ME TIME IT WILL BE "
jer3270
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 20
Offline Offline

Posts: 192
« Reply #14 on: March 04, 2011, 06:51:01 PM »
Yeah, them things!!! Duh! Thanks For the correction Bunker! That's why you guys are the PRO's Hail
Logged
idesign
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 509
Offline Offline

Gender: Male
Posts: 1456


If it aint broke why mess with it?????
« Reply #15 on: March 04, 2011, 07:44:53 PM »
MOD. PLEASE DELETE THIS
« Last Edit: March 05, 2011, 12:01:38 PM by idesign » Logged
idesign
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 509
Offline Offline

Gender: Male
Posts: 1456


If it aint broke why mess with it?????
« Reply #16 on: March 04, 2011, 07:45:45 PM »
Quote from: idesign on March 04, 2011, 07:44:53 PM
Quote from: Buzz on March 04, 2011, 06:45:31 PM
Quote from: idesign on March 04, 2011, 10:26:09 AM
Quote from: Bettor Slots on March 04, 2011, 04:38:20 AM
Hey, any chance these are 504rB boards made by Keytronics?  And if so can you test the output on your your green battery near the heat sink?





You may be onto something Jim.  I haven't tried it but someone else told me that on 504 rev B boards if you remove the green battery, the machine reports an unclearable error, unless it's replaced.  Bottom line, don't remove the green battery on 504 rev B boards.

Jeff    I to have removed the green bat. from a 504 with success.  Blueridge told me not to remove the Battery from the enhanced 2701 board. I had to test him and he was right. It won't work with out the battery!!!! 

Oh, maybe I was confusing that with the Enhanced boards.

CRS lately.....LOL
Logged
Tilt
Contributing Gold NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 366
Offline Offline

Gender: Male
Posts: 724
« Reply #17 on: March 04, 2011, 10:05:48 PM »
OK good.  I have my Keytronics made in Mexico 504b board running without the nicad too.  CRS comes with age...what was it I was talking about?  Duh!
Logged
Foster
The S2000 GURU
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 345
Offline Offline

Gender: Male
Posts: 2872
« Reply #18 on: March 04, 2011, 10:28:37 PM »
Just a small FYI when you remove the battery, the battery is soldered at 3 points
I am thinking it is the negative end, be sure solder a small wire between contacts on that one end only.
When I removed a battery from a 502 board it started acting strange until I jumpered the 2 contacts on the one end of the battery.
Logged
A Slot Machine and Coca-Cola Addict!!
"If it is not broke do not fix it" I keep forgetting that!
Pages: [1] Go Up Print 
« previous next »
Jump to:  

SimplePortal Classic 2.0.5

If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com ™    Newlifegames.net ™    Newlifegames.org ™
   New Life Games ™    NewLifeGames ™  NLG ™ We Bring new Life to old Games ™    1-888-NLG-SLOTS ™
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.106 seconds with 20 queries.