are these progressive boards?

[IGTfanman777]

Thx vegas. Yes weve been discussing a deal but i need to be 100% sure it will work with my setup. Hes trying to hook me up with a tech that can confim it. Gotta be sure cause they not cheap. :-) thx vegas!!

[IGTfanman777]

This meassage is for vegas and anyone else who can help: my display only has dsl cable/ fiber optic cables coming from it. And my j5 connection from the smib card is a small red plug. (please see photos) now, studying the con2 versions, i see nothing on the controller for these connector types. There are however dsl type jacks on this different type of mikohn controller made in lima, peru. Heres the link to the manual:
http://www.mikohn.net/manuales/progressive_system.pdf
See pages 13 & 14 for pics
Is it likely the con2i is not the right controller? Help!

[4 Deuces]

Hey, so sorry for the late reply!!!     

I was out of town and still catching up.  Even after making you wait, unfortunately, I don't have an answer either.  I'm just not familiar enough with that kind of setup.  But I'll throw in my two cents to keep this post alive.

First, I think you will have a very hard time finding this particular Mikohn progressive system from Lima, Peru.  Okay, I know, more bad news.   

Second, often times, it's not a straight-through connection where both ends of the cable look the same.  You often times need a harness where the connector on each end is different to support the machine or controller that you're connecting to.  The CON2 manual describes various harnesses in the Appendices.  If you can't find the harness anywhere, you're probably going to have to make it.

Finally, the CON2if is specifically designed to include fiber optic connections (thus the "f" after the "i").  That might make the harness a little easier, but making a harness isn't all that bad (although if you read my post, you'll see I required Band-aids and lots of alcohol).


I hope this helps and at the very least, moves the post back to the forefront for more experienced eyes.   

[IGTfanman777]

Ty very much vegas. Your words will stay in stone here for future reference when / if i get more clues. I have faith in time we'll make some progress when someone sees this that knows. . Ive learned to be patient at this point. thx brother.

[turniphead]

Hey Tim,    just wanted to let you & everyone else know that I heard from my guy that the slot tech he knows is looking at the sigma manual this weekend & will be in touch with you soon. 

[IGTfanman777]

You- are- the- MAN!! Thank you, thank you!