What type of clear needed when Changing personality chips s6000

[b5srt]

What type of clear is needed when changing personality chips s6000, Complete, full or partial. Is there anyway to retain the ticket printer settings ? Thx

[a69mopar]

Complete, hold both pseudo coin and test while booting machine (with Saferam Clear chips installed).

w

[b5srt]

Complete, hold both pseudo coin and test while booting machine (with Saferam Clear chips installed).

w

Thanks Wayne, I am guessing there is no way to save the printer settings since it is a complete.

[FORDSBS]

Switch Functions
The buttons on the player panel and on the MPU
assembly have multiple uses. Note that the slant top
model has additional TEST and PSEUDO COIN buttons on
a bracket above the reels for easier access.
Switch Location Function
Change Main Door •Activate change lamp
•Restart or activate some tests
•Exit time and date settings after
SafeRAMâ„¢ Clear
Cash/Credit
Print Ticket
Main Door •Cash out credits
Bet One Main Door •Wagers 1 credit
•Select Previous Option
Spin Main Door •Spin reels
•Pause test display
•Pause meter display
•Change options
Bet Max Main Door •Wagers maximum credits
•Select next option, meter, or game
Audit Key Switch
(Upright)
Right Side of
Machine
•Displays bookkeeping meters
•Releases jackpot lockup
•Triggers some output tests
Audit Key Switch
(Slant)
Front Panel,
Above Door
•Displays bookkeeping meters
•Releases jackpot lockup
•Triggers some output tests
Second Key
Switch
Near Audit Key
Switch
•Selects between revenue or
tournament game
•Same as test (MC=12)
•Adds or removes credits
(International)
Test MPU Assembly •Selects tests or function
•Activates next test or function
•Selects level of SafeRAM™ Clear
Coin Acceptor MPU Assembly •Enable or disable coin acceptor
and bill acceptor
Pseudo Coin MPU Assembly •Simulates coin in while main door
is open
•Selects next option
•Selects a level of SafeRAM™ Clear
Reset MPU Assembly •Releases a machine tilt
•Exits test and diagnostics
Volume ProSound
Board
•Adjusts the level of sound
replace them with the corresponding clear chips.
If EPROMs are not required, turn DIP DS1 sw8 ON.
After ensuring that the MPU assembly is firmly seated
into the backplane board, turn the machine power ON
while depressing the appropriate buttons.
Complete - Press and hold the PSEUDO COIN and TEST
buttons, then switch power ON. When the message CH
C displays in WIN PAID, release the PSEUDO COIN and TEST
buttons. The CH C message is followed by CL C.
Full - Press and hold the PSEUDO COIN button, then
switch power ON. When the message CH F appears
in WIN PAID, release the PSEUDO COIN button. The CH F
message is followed by CL F.
Partial - Switch power ON. The message CH P displays
in WIN PAID. The CH P message is followed by CL P.
If an error was detected during SafeRAMâ„¢ Clear as
designated by E C, E F, E P in WIN PAID, repeat the
operation.
Upon a successful SafeRAMâ„¢ Clear, the button and
tower lamps flash. Switch power OFF and replace the
SafeRAMâ„¢ Clear EPROMs with the Mains, or turn DS1
sw8 OFF. Replace the MPU assembly and switch machine
power ON. The machine will enter a Reel Calibration
Procedure whereby the home position is recorded in
SafeRAMâ„¢. For tilt-free operation, it is important that
the procedure completes without interruption.
NOTE: A SafeRAMâ„¢ Clear for MC=28
requires a SafeRAMâ„¢ Clear EPROM,
and DS1 sw8 to be enabled (ON).
NOTE: The TEST and PSEUDO coin
buttons can be located by referring to
the pictures on pages 2-5 and 2-6.
NOTE: If door open or MPU logic
detection circuits are enabled, an
audit key switch activation is required
to remove the 82/85 code after power
is switched ON.
SafeRAMâ„¢ Clear (cont

[a69mopar]

Complete, hold both pseudo coin and test while booting machine (with Saferam Clear chips installed).

w

Thanks Wayne, I am guessing there is no way to save the printer settings since it is a complete.

Correct.  Programming the printer is fairly easy.  If you like, we can do that here some time.  Next weekend is a great possibility for that other item.

Thanks,
Wayne