Welcome, Guest. Please login or register.
November 22, 2024, 06:32:26 PM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  **Reel Slots** Gaming Machines
| |-+  IGT S and S-plus Reel Games. (Moderator: knagl)
| | |-+  Mystery S+ board		 0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: Mystery S+ board  (Read 5931 times)
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447
« on: January 19, 2009, 02:40:12 PM »
Hi,
I  received a couple boards but I'm not quite sure what they are or what they do?
Anybody have a clue? Maybe for display meters of some type?
The J63 header is 5-pins , while the 2 blue J64/J65 headers are 20-pins each.
These boards were made in 1995 by IGT. With ASSY NO #7510710.
I've attached a couple of photos...click on them to enlarge them.

* mystery board 003.jpg (75.2 KB, 800x600 - viewed 357 times.)

* mystery board 004.jpg (88.15 KB, 800x600 - viewed 377 times.)
Logged
idesign
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 509
Offline Offline

Gender: Male
Posts: 1456


If it aint broke why mess with it?????
« Reply #1 on: January 19, 2009, 03:09:37 PM »
They are progressive driver boards
Logged
jay
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 483
Offline Offline

Gender: Male
Posts: 3178


if you cant afford to lose you cant afford to win
« Reply #2 on: January 19, 2009, 03:26:44 PM »
The small black connector plugs into the 6wire (?? I think its 6) molex connector in the top box. This is both power and interface.
The edge connectors go to 1 or 2 of the behind the glass progressive displays.

If you look inside your top box, on the left hand side, there are usually 4 screw offsets that match the holes on the board perfectly.
April probably has a couple of the displays around.
Logged
The only way to beat the casino is to own it
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447
« Reply #3 on: January 19, 2009, 03:33:09 PM »
I agree these may be progressive driver boards too...but for what?

The connector on the S+ is 6-pin...these boards are needing  a 5-pin connector harness.
I'm thinking that maybe these were revised boards?

Now I'm wondering what the wire color pin-outs are in S+ top box harness.
I may have to modify these board headers to make them work....but I don't know what's what in the J63 header.

The first photo is the 5-pin header board in question.
The second photo is the mini-photon progressive that I use (note the short adapter harness that connects to the top box harness from the 6-pin J63 header)

That short adapter harness wont fit on the mystery boards.

* mystery progressive board 002.jpg (93.51 KB, 800x600 - viewed 431 times.)

* S+ mini-photon driver board.jpg (109.71 KB, 800x600 - viewed 420 times.)
« Last Edit: January 19, 2009, 03:46:48 PM by stayouttadabunker » Logged
edski
Contributing Gold NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 123
Offline Offline

Gender: Male
Posts: 188
« Reply #4 on: January 19, 2009, 05:15:50 PM »
Possibly this?

http://newlifegames.net/nlg/index.php?topic=1387.msg10079#msg10079
Logged
Spoiled Rotten Birds
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447
« Reply #5 on: January 19, 2009, 07:07:13 PM »
Thank you so very much edski!,
I think that's exactly what I was looking for...I will make a short adapter harness and give it a go! applause Hail
Kudos+ man! ( and everyone else who helped!)
 yes
Logged
Foster
The S2000 GURU
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 345
Offline Offline

Gender: Male
Posts: 2872
« Reply #6 on: January 19, 2009, 07:22:31 PM »
That mystery board is either S or S+ slot progressive driver.

It has the same parts as the Player display (they added 3 or 4 chips to drive a full 16 digits) while the player display only has to drive 9 digits.
« Last Edit: January 19, 2009, 07:31:00 PM by Foster » Logged
A Slot Machine and Coca-Cola Addict!!
"If it is not broke do not fix it" I keep forgetting that!
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447
« Reply #7 on: January 19, 2009, 07:59:28 PM »
I took a few minutes to construct a short adapter harness, plug it in and it worked!
Thanks guys!
Took a couple of pictures for ya.
First one is the mystery board with the new harness I made w/ a mini-photon display board.
The second picture is the board hooked up in the top box temporarily.
Click on photos to enlarge>>>

* mystery board solved! 002.jpg (86.84 KB, 800x600 - viewed 426 times.)

* mystery board solved! 001.jpg (78.64 KB, 800x600 - viewed 463 times.)
Logged
jay
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 483
Offline Offline

Gender: Male
Posts: 3178


if you cant afford to lose you cant afford to win
« Reply #8 on: January 19, 2009, 08:01:30 PM »
Nice looking harnesses. Good Job.
Logged
The only way to beat the casino is to own it
edski
Contributing Gold NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 123
Offline Offline

Gender: Male
Posts: 188
« Reply #9 on: January 19, 2009, 08:40:46 PM »
I've used the 2x4 support myself!! arrow arrow


Ed
Logged
Spoiled Rotten Birds
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447
« Reply #10 on: January 19, 2009, 11:34:45 PM »
Quote from: jay on January 19, 2009, 08:01:30 PM
Nice looking harnesses. Good Job.

Thanks Jay,
I actually used a couple of pieces I had laying around...I noticed that the white 15-pin molex in the top box is the same as a harness that would be on the door for a 13V coin mech.
I soldered the correct 5 wires from the large 15-pin molex into the 5 female receptors that come from a small black 5-pin female molex connector. ( I prefer hot soldering rather than crimping.)
Then it was easy to plug the 5 wires into a small black molex according to edski's great link.
3 nice tight plastic ties later, and voila...a new adapter harness !

Quote from: edski on January 19, 2009, 08:40:46 PM
I've used the 2x4 support myself!! arrow arrow
Ed

Yeah, I didnt want to short out the progressive board when I plugged it into power! rotflmao
I find little sticky velcro's give enough space and will hold the board in place later onto the top box floor.
« Last Edit: January 20, 2009, 12:01:57 AM by stayouttadabunker » Logged
Pages: [1] Go Up Print 
« previous next »
Jump to:  

SimplePortal Classic 2.0.5

If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com ™    Newlifegames.net ™    Newlifegames.org ™
   New Life Games ™    NewLifeGames ™  NLG ™ We Bring new Life to old Games ™    1-888-NLG-SLOTS ™
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.105 seconds with 20 queries.