Welcome, Guest. Please login or register.
October 05, 2024, 09:16:46 AM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  **Reel Slots** Gaming Machines
| |-+  IGT S2000 and Vision Games.
| | |-+  netplex ink dowm		 0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: netplex ink dowm  (Read 2353 times)
morgansinpv
New NLG Member 1 to 100 Post
**

Total Karma Storms: 0
Offline Offline

Posts: 41
« on: June 23, 2012, 09:41:51 PM »
thats my problem   turn it on and display says  netplex link down
i need help
read other post but cant seem to get it
help help
thanks
scott
Logged
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447
« Reply #1 on: June 24, 2012, 12:05:09 AM »
Just for kicks...check the battery voltage on your MPU?
A low battery seems to be the cause of a lot of problems.
Should read at near or above 3 volts DC.
Logged
kforeman
Today...Slot Tech Tomorrow...Still be a Tech
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 42
Offline Offline

Gender: Male
Posts: 378
« Reply #2 on: June 25, 2012, 12:02:44 PM »
Quote from: morgansinpv on June 23, 2012, 09:41:51 PM
thats my problem   turn it on and display says  netplex link down
i need help
read other post but cant seem to get it
help help
thanks
scott

most common cause of this in the casino world is a bad DC switching power supply, located behind the reels on an upright machine.  if you don't have a known good one to test with then you probably won't get much further.  you could pull the power supply out and change the following capacitors, we've had about a 75-80% success rate with bringing them back to life. some caps on this list may have higher voltages than what you are taking out; it's OK to go up in voltage but don't change the microfarads on them! ttth  also watch for physical size of the replacement caps getting too big, there's not much extra room in there.  good luck!! yes

C24   Remove & Leave Out
C37   6800uf, 25V
C38   6800uf, 25V
C39   6800uf, 25V
C41   47uf, 50V
C44   2200uf, 50V
C45   2200uf, 50V
C46   2200uf, 50V
C47   2200uf, 50V
C48   47uf, 50V
C50   100uf, 35V
C51   100uf, 35V
C52   22uf, 63V
C57   100uf, 35V
C58   330uf, 50V
Logged
Now You're Techin'!!!
brianfink
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 20
Offline Offline

Gender: Male
Posts: 348
« Reply #3 on: June 27, 2012, 12:20:25 AM »
also sometimes if the machine has recently been moved you might need to just pull out the MPU and push it back in with the power off ofcoarse and make shure the power supply is pushed all the way to the right
 
Logged
Foster
The S2000 GURU
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 345
Offline Offline

Gender: Male
Posts: 2872
« Reply #4 on: June 27, 2012, 06:28:00 AM »
How about checking that the machine in question that none of the wires going to the display are being pinched in the door hinge.

I know someone that moved the wires so they got pinched every time the door was closed
He could not figure out why the door got harder to close after doing it
I noticed it and quickly corrected his mistake his machine was also malfunctioning.

Also I have noticed that the MPU might need a slight push on it to make sure that the connectors are fully connected.
Logged
A Slot Machine and Coca-Cola Addict!!
"If it is not broke do not fix it" I keep forgetting that!
Pages: [1] Go Up Print 
« previous next »
Jump to:  

SimplePortal Classic 2.0.5

If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com ™    Newlifegames.net ™    Newlifegames.org ™
   New Life Games ™    NewLifeGames ™  NLG ™ We Bring new Life to old Games ™    1-888-NLG-SLOTS ™
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.108 seconds with 20 queries.