Welcome, Guest. Please login or register.
September 27, 2024, 08:42:20 PM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  **Reel Slots** Gaming Machines
| |-+  IGT S2000 and Vision Games.
| | |-+  S2000 bill validator		 0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: S2000 bill validator  (Read 5940 times)
rickaaaer
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 10
Offline Offline

Gender: Male
Posts: 279
« on: August 01, 2012, 04:16:18 PM »
My bill validator has a red,white and black wire. I would like to know.what they are uses for and there importance .I'm posting a photo of the wires I'm talking about

* Bill val.JPG (341.97 KB, 1296x968 - viewed 350 times.)
« Last Edit: August 01, 2012, 06:10:22 PM by rickaaaer » Logged
Buzz
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1158
Offline Offline

Gender: Male
Posts: 4641
« Reply #1 on: August 01, 2012, 05:12:37 PM »
Rick   why would you ask ?? If your talking about a WBA there are 4 plugs coming out of the BV only 3 of them are used. The only three wire plug coming from the BV is the one not used.
Logged
NLGs Motto  " IF IT AIN'T BROKE GIVE ME TIME IT WILL BE "
rickaaaer
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 10
Offline Offline

Gender: Male
Posts: 279
« Reply #2 on: August 01, 2012, 05:20:31 PM »
The BV has a white connector on it. Not sure how many wires there are and then there is a cable with 3 wires red . White and black . I ask because the bill Val is not working. I thought the wires might be the reason
Logged
Buzz
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1158
Offline Offline

Gender: Male
Posts: 4641
« Reply #3 on: August 01, 2012, 05:59:40 PM »
This is the loom that goes from the BV to the machine with a WBA BV.  Are you sure you have a WBA ??  Like I said only 3 of the plugs are used. The top plug in the picture is the one that isn't used. But the colors are ( it's hard to tell with my old eyes ) my guess is dark blue/ purple/dark green. 

Mabe you should just tell ue what the BV is doing or in this case not doing.

* PICT0016.JPG (711.94 KB, 1280x960 - viewed 339 times.)
Logged
NLGs Motto  " IF IT AIN'T BROKE GIVE ME TIME IT WILL BE "
rickaaaer
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 10
Offline Offline

Gender: Male
Posts: 279
« Reply #4 on: August 01, 2012, 06:17:21 PM »
No I'm not sure at all. My bv only has one connector on it. The connector that plugs into the BV has 3 different jacks on the other end that look something like your picture. I have posted a photo of the wires I'm talking about in my first thread an I will post it here also. You ask what it was doing. Well the light on the front of The BV does not come on. It will take bills but spits them back out. I don't know if the BV is even any good. It came with the machine that was parted out. If it will help here is a photo of BV serial # and data info.

* Bill val.JPG (341.97 KB, 1296x968 - viewed 342 times.)

* photo78.JPG (493.03 KB, 1296x968 - viewed 316 times.)
« Last Edit: August 01, 2012, 06:36:05 PM by rickaaaer » Logged
Buzz
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1158
Offline Offline

Gender: Male
Posts: 4641
« Reply #5 on: August 01, 2012, 07:13:58 PM »
You see there were talking apples and oranges.  Yuo don't have a WBA and I can't help you.Yours is a Mars and I don't know anything about them.
Logged
NLGs Motto  " IF IT AIN'T BROKE GIVE ME TIME IT WILL BE "
monitorman
NLG Member 101 to 500 Post
***

Total Karma Storms: 9
Offline Offline

Gender: Male
Posts: 129
« Reply #6 on: August 02, 2012, 01:03:29 AM »
The mars ZT1202 is a IGT bv. Was this in your game and did it work before. If it was a working unit the rollers look dirt so you might need to clean it. The wires you were looking at first are (cash box removed wires) not used in S2000.
Logged
Jim
MIDWEST SLOTS
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 288
Offline Offline

Gender: Male
Posts: 1172


513-984-2201
« Reply #7 on: August 02, 2012, 01:20:25 AM »
the ZT1202   is a MARS bill acceptor.  that model has been discontinued   there should be a plug that comes from the unit you have pictured,  the back of the ZT transport should have the counter part of that plug.  meaning one is male and the other female,  the plug that comes off the  housing  mates to a square plug that  terminates to the four plugs to adapt to the S-2000.

the plcc chip to upgrade to the new money is hard to find.   I would strongly recommend converting to a WBA bill acceptor.  you can use the metal housing that is in the machine, you will have to purchase a transport housing complete with wiring harness,  and a WBA transport and head and duck bill programmed with the IDO-024  and latest new money program.  you will also need a cash can.   

Hope this helps

Jim
Logged
MIDWEST SLOTS   Selling Quality Slot Machines since 1995.  We service and repair all types of slot machines. Mills, Jennings, Bally EM, 1000/2000 series, Proslot, 6000. IGT  M, M+ ,S,  S+, S-2000,  I-Game,  Universal,  Video Poker, Sigma.
monitorman
NLG Member 101 to 500 Post
***

Total Karma Storms: 9
Offline Offline

Gender: Male
Posts: 129
« Reply #8 on: August 02, 2012, 02:42:42 AM »
Wht put a WBA in when support ends at the end of the year. I would put in a Mars SC66-02
Logged
rickaaaer
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 10
Offline Offline

Gender: Male
Posts: 279
« Reply #9 on: August 03, 2012, 04:02:29 AM »
Quote from: monitorman on August 02, 2012, 01:03:29 AM
The mars ZT1202 is a IGT bv. Was this in your game and did it work before. If it was a working unit the rollers look dirt so you might need to clean it. The wires you were looking at first are (cash box removed wires) not used in S2000.
it has never worked. This machine was parted an I got it working. Ive check the configuration think its right. How do I witch to a Wbm
Logged
Foster
The S2000 GURU
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 345
Offline Offline

Gender: Male
Posts: 2872
« Reply #10 on: August 03, 2012, 04:30:15 AM »
How hard was it for you to get the current BV out.
its about that hard to put a WBA in and get it connected to the machine.
The only other hard part is getting the machine to recognize the new BV and configure it
but it will do most of that when you turn the power back on.
I would go for a WBA-13 but realize as soon a new bill the newest 100 (even though it is not released yet) is supported in the latest software the wba-13
Now if they release another new bill you I and many others will be looking for a different BV that will support that bill
I will stick with JCM for now unless some one can say another brand beats them and can back it up.
« Last Edit: August 03, 2012, 04:51:49 AM by Foster » Logged
A Slot Machine and Coca-Cola Addict!!
"If it is not broke do not fix it" I keep forgetting that!
Ron (r273)
NLG Welcome Wagon & General Chat
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 401
Offline Offline

Gender: Male
Posts: 1819
« Reply #11 on: August 03, 2012, 11:33:12 AM »
Quote from: Foster on August 03, 2012, 04:30:15 AM
How hard was it for you to get the current BV out.
its about that hard to put a WBA in and get it connected to the machine.
The only other hard part is getting the machine to recognize the new BV and configure it
but it will do most of that when you turn the power back on.
I would go for a WBA-13 but realize as soon a new bill the newest 100 (even though it is not released yet) is supported in the latest software the wba-13
Now if they release another new bill you I and many others will be looking for a different BV that will support that bill
I will stick with JCM for now unless some one can say another brand beats them and can back it up.



I think it was released last year, V-3.80-34. But finding it is another problem.

http://jcmglobal.com/Libraries/Technical_Bulletins/Checking_of_UBA_Performance.sflb.ashx

http://jcmglobal.com/Libraries/Customer_Notifications/WBA_Product_Discontinuation_Notice.sflb.ashx

Ron (r273)
Logged
rickaaaer
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 10
Offline Offline

Gender: Male
Posts: 279
« Reply #12 on: August 03, 2012, 05:29:38 PM »
 Well this one just fell out when I removed the screw. I have two other machines with the Mars bill acceptors also. I have not figured out whats holding then in I've looked and looked. Does anyone know how it comes out.
Quote from: r273 on August 03, 2012, 11:33:12 AM
Quote from: Foster on August 03, 2012, 04:30:15 AM
How hard was it for you to get the current BV out.
its about that hard to put a WBA in and get it connected to the machine.
The only other hard part is getting the machine to recognize the new BV and configure it
but it will do most of that when you turn the power back on.
I would go for a WBA-13 but realize as soon a new bill the newest 100 (even though it is not released yet) is supported in the latest software the wba-13
Now if they release another new bill you I and many others will be looking for a different BV that will support that bill
I will stick with JCM for now unless some one can say another brand beats them and can back it up.



I think it was released last year, V-3.80-34. But finding it is another problem.

http://jcmglobal.com/Libraries/Technical_Bulletins/Checking_of_UBA_Performance.sflb.ashx

http://jcmglobal.com/Libraries/Customer_Notifications/WBA_Product_Discontinuation_Notice.sflb.ashx

Ron (r273)
Logged
rickaaaer
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 10
Offline Offline

Gender: Male
Posts: 279
« Reply #13 on: August 03, 2012, 05:32:21 PM »
Quote from: Foster on August 03, 2012, 04:30:15 AM
How hard was it for you to get the current BV out.
its about that hard to put a WBA in and get it connected to the machine.
The only other hard part is getting the machine to recognize the new BV and configure it
but it will do most of that when you turn the power back on.
I would go for a WBA-13 but realize as soon a new bill the newest 100 (even though it is not released yet) is supported in the latest software the wba-13
Now if they release another new bill you I and many others will be looking for a different BV that will support that bill
I will stick with JCM for now unless some one can say another brand beats them and can back it up.

Well this one just fell out when I removed the screw. I have two other machines with the Mars bill acceptors also. I have not figured out whats holding then in I've looked and looked. Does anyone know how it comes out.
Logged
rickaaaer
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 10
Offline Offline

Gender: Male
Posts: 279
« Reply #14 on: August 03, 2012, 07:33:10 PM »
Ok I checked the configuration . The limit is defaulted at 1000.00 on all. The rest of the configuration looked right. So thinking it might be the Mars bill acceptor. Going to try to change it out to a WBM-13 if I can find one. If not is there another model that will work? Thanks for all your help.
Logged
Pages: [1] Go Up Print 
« previous next »
Jump to:  

SimplePortal Classic 2.0.5

If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com ™    Newlifegames.net ™    Newlifegames.org ™
   New Life Games ™    NewLifeGames ™  NLG ™ We Bring new Life to old Games ™    1-888-NLG-SLOTS ™
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.112 seconds with 20 queries.