Welcome, Guest. Please login or register.
June 16, 2024, 03:06:15 AM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  **Reel Slots** Gaming Machines
| |-+  Bally Reel Games. (Moderator: a69mopar)
| | |-+  Bally S5500 - - Blazing 7s Double Jackpot game.
0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: Bally S5500 - - Blazing 7s Double Jackpot game.  (Read 10361 times)
colorado
New NLG Member 1 to 100 Post
**

Total Karma Storms: 2
Offline Offline

Gender: Male
Posts: 100



« on: September 25, 2012, 09:47:35 PM »

With the help of some of the awesome members of this forum.

I was able to get an MPU board for this Bally S5500 Blazing 7s Double Jackpot game.

I also installed new personality chips and did a "CLR"

The payout doesn't seem to match the payout glass.

When the bars line up the payout seems to be correct.
When the 777's line up there is no payout or the wrong payout.

Is there a possibility the mains or any other chips on the board could be the wrong chips ?

I have attached photos of the payout glass and some of the chips.. Scratch Head


* 2012-09-25 19.14.45.jpg (1777.35 KB, 3264x2448 - viewed 504 times.)

* 2012-09-25 19.20.13.jpg (266.4 KB, 600x800 - viewed 374 times.)
« Last Edit: September 25, 2012, 09:54:58 PM by colorado » Logged
leapyearguy
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 21
Offline Offline

Gender: Male
Posts: 226



« Reply #1 on: September 25, 2012, 10:37:45 PM »

are you playing more than 1 coin?
Logged

20 bucks for simple repairs, 30 if you watch, and 50 if you open your mouth.
colorado
New NLG Member 1 to 100 Post
**

Total Karma Storms: 2
Offline Offline

Gender: Male
Posts: 100



« Reply #2 on: September 25, 2012, 10:45:04 PM »

You know, that's a good question.  I couldn't swear to
It that each time I put in three.  I'll run it for a while again making sure each play
I use two or three quarters. 

Another thing I noticed.  The reels don't seem to new centered
With the windows.  It doesn't look like the glass can be moved
Side to side without creating a gap or hole to the chrome
Edge. Do you think it could be the wrong reel glass. 


* 2012-09-25_19-15-34_596.jpg (1605.25 KB, 3264x2448 - viewed 476 times.)
Logged
leapyearguy
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 21
Offline Offline

Gender: Male
Posts: 226



« Reply #3 on: September 25, 2012, 10:51:48 PM »

i doubt it but the strips could be off where they are supposed to be. they can slide in the grooves if they are cleaned too aggressively. The machine is a three coin buy a pay that is why I asked about playing more than one coin. as for the reels, there is a small bump within the groove of the reel that the notch on the strip has to line up on. check that
Logged

20 bucks for simple repairs, 30 if you watch, and 50 if you open your mouth.
colorado
New NLG Member 1 to 100 Post
**

Total Karma Storms: 2
Offline Offline

Gender: Male
Posts: 100



« Reply #4 on: September 25, 2012, 11:01:26 PM »

I will check that. 
The glass just looks like it doesn't fit the reels. 
Side to side.  Also there are those blank space above the reel windows. 
Maybe used to have tags or signs in there.

I'll double check the reel strips are seated. 
Thanks a ton. 
Logged
leapyearguy
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 21
Offline Offline

Gender: Male
Posts: 226



« Reply #5 on: September 25, 2012, 11:22:40 PM »

yeah, you're missing all the inserts. the top left should be play 3 credits or coins. the long one indicates hopper payout limit and the bottom is for the denom. you may be able to loosen the screws and adjust the glass a little to center the reels better.
Logged

20 bucks for simple repairs, 30 if you watch, and 50 if you open your mouth.
bruno
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 11
Offline Offline

Gender: Male
Posts: 133



« Reply #6 on: September 25, 2012, 11:26:25 PM »

Colorado,
Your reel glass is for 6000, not 5500
Nevertheless this does not explain the wrong payout.
Logged
a69mopar
647-402-1977
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 600
Offline Offline

Gender: Male
Posts: 3508



WWW
« Reply #7 on: September 25, 2012, 11:28:45 PM »

Assuming you are playing 3 credits, you should check to make sure your reel strips are in the correct order and the correct (upright) notches are aligned.

Thanks,
Wayne
Logged

         www.GTASLOTS.com      647-402-1977              BALLY S6000 GALLERY
bruno
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 11
Offline Offline

Gender: Male
Posts: 133



« Reply #8 on: September 25, 2012, 11:36:58 PM »

Secondly,
I completely agree with the leapyearguy's avatar !  yes
[[damn!  Silly Me! this post will be obsolete if leapyearguy changes his avatar!]]
« Last Edit: December 19, 2012, 04:26:32 AM by bruno » Logged
bruno
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 11
Offline Offline

Gender: Male
Posts: 133



« Reply #9 on: September 25, 2012, 11:52:09 PM »

Follow the advice of Wayne
The reel strips have a number at the end like M923-2954
With the Blazing 7s Double, we're sure that the 3rd strip is the one with the Double symbol.
Check the 1st & 2nd, it should be (assuming M923-2954 is the 3rd) : 1st=M923-2952  2nd=M923-2953
Logged
colorado
New NLG Member 1 to 100 Post
**

Total Karma Storms: 2
Offline Offline

Gender: Male
Posts: 100



« Reply #10 on: September 26, 2012, 12:19:19 PM »

Can you tell me how I can tell the difference between
The Bally S5500 and 6000.
Logged
coorslight115
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 79
Offline Offline

Gender: Male
Posts: 2602



« Reply #11 on: September 26, 2012, 01:34:22 PM »

Attached are the two mpu,s so you can see the difference.


* bally 5500 mpu.jpg (130.36 KB, 800x600 - viewed 433 times.)

* bally 6000 mpu.jpg (618.22 KB, 1500x1095 - viewed 420 times.)
Logged
leapyearguy
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 21
Offline Offline

Gender: Male
Posts: 226



« Reply #12 on: September 26, 2012, 02:18:50 PM »

another thing, at least with the one we've had. the 6000 has the WBA bill acceptor.
Logged

20 bucks for simple repairs, 30 if you watch, and 50 if you open your mouth.
coorslight115
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 79
Offline Offline

Gender: Male
Posts: 2602



« Reply #13 on: September 26, 2012, 02:29:17 PM »

another thing, at least with the one we've had. the 6000 has the WBA bill acceptor.

Some early 6000 had mei mars bill acceptors as well, can't remember for sure but I think 5500 did not have ticket printers.
Logged
bruno
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 11
Offline Offline

Gender: Male
Posts: 133



« Reply #14 on: September 26, 2012, 03:13:27 PM »

When you look at the machine (upright model), the most obvious difference is the location of digital meters.
6000 >>> below the reels
5500 >>> on the right of the reels
Logged
colorado
New NLG Member 1 to 100 Post
**

Total Karma Storms: 2
Offline Offline

Gender: Male
Posts: 100



« Reply #15 on: September 26, 2012, 07:21:17 PM »

Thanks for the help.
My dilemma is. I bought four pretty stripped
Bally machines.  None none had MPU boards or
Bill acceptor.
I can go with the location of the digital read out.  
All are to the right of the reels.  
Based on meter location, that means all are S5500 slots.  
« Last Edit: September 26, 2012, 07:27:37 PM by colorado » Logged
bruno
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 11
Offline Offline

Gender: Male
Posts: 133



« Reply #16 on: September 26, 2012, 07:33:27 PM »

I think so.
Have you solved your problem for the payout ?
Have you checked the correct order of your reel strips and the notches for upright model ?
Logged
colorado
New NLG Member 1 to 100 Post
**

Total Karma Storms: 2
Offline Offline

Gender: Male
Posts: 100



« Reply #17 on: September 26, 2012, 08:12:27 PM »

Work is getting in the way.
I had to work eleven hours today. 
Just got home. 
I hope to test it tonight. 
Thanks so much. 
I will drop a line back with my findings.
Respectfully. 
Colorado
Logged
colorado
New NLG Member 1 to 100 Post
**

Total Karma Storms: 2
Offline Offline

Gender: Male
Posts: 100



« Reply #18 on: September 27, 2012, 08:35:13 PM »

The payout problem appears to have been my problem,  
not reading The payout glass correct.  I made sure that all spins were Done with three quarters.  
Each payout was correct.  I posted a picture shows any three 7s paid out
200 quarters.  

I checked all reels and strips for correct position and location.  
All appear to be correct.  Still not sure why reels don't line up
In windows. I'm thinking wrong glass.  

Thank you very much for your help and advice.  
Colorado


* rps20120927_205614.jpg (97 KB, 600x800 - viewed 422 times.)
« Last Edit: September 27, 2012, 10:56:54 PM by colorado » Logged
bruno
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 11
Offline Offline

Gender: Male
Posts: 133



« Reply #19 on: September 27, 2012, 09:51:59 PM »

The reel glass for 6000 is 8"1/4 height, for 5500 > 8"1/8
This can explain the gap for the line up,
because your 5500 on the picture has a 6000 reel glass.
Logged
colorado
New NLG Member 1 to 100 Post
**

Total Karma Storms: 2
Offline Offline

Gender: Male
Posts: 100



« Reply #20 on: September 27, 2012, 11:03:30 PM »

Can you tell from the photos?
Logged
bruno
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 11
Offline Offline

Gender: Male
Posts: 133



« Reply #21 on: September 27, 2012, 11:24:29 PM »

From your last photo,
the line up seems to be correct, except the 2nd reel very,very slightly below.
Not so bad..
Logged
colorado
New NLG Member 1 to 100 Post
**

Total Karma Storms: 2
Offline Offline

Gender: Male
Posts: 100



« Reply #22 on: September 28, 2012, 09:30:54 AM »

It's the side to side location. 
The left reel has about 1/4" - 1/2" gap..
The center reel is less and the right reel looks okay. 
« Last Edit: September 28, 2012, 09:36:50 AM by colorado » Logged
Pages: [1] Go Up Print 
« previous next »
Jump to:  


If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com    Newlifegames.net    Newlifegames.org
   New Life Games    NewLifeGames  NLG  We Bring new Life to old Games    1-888-NLG-SLOTS
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.154 seconds with 21 queries.