Welcome, Guest. Please login or register.
November 22, 2024, 02:05:55 PM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  **Reel Slots** Gaming Machines
| |-+  SIGMA Reel Games.
| | |-+  Sigma upright slot acting up-need help		 0 Members and 2 Guests are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: Sigma upright slot acting up-need help  (Read 3952 times)
littledmac
New NLG Member 1 to 100 Post
**

Total Karma Storms: 0
Offline Offline

Posts: 6
« on: July 24, 2012, 06:18:59 AM »
Hi My Sigma slot is acting up. has worked fine until now. Now when ever a combination to give any "winner paid" credits, the machine shuts off, then turns back on and makes the door open alarm.  then once back on, it displays the correct amount for the winner paid amount for the win that happened before shutting off. so it still is doing what it is supposed to as far as dislaying the amount won, just it is shutting off in between. It has done it everytime now for the past 10 to 15 "hits" anybody got any ideas? machine is a Sigma cherries r wild upright slot SG-50c early 90's model
Logged
riverratmike
New NLG Member 1 to 100 Post
**

Total Karma Storms: 4
Offline Offline

Gender: Male
Posts: 88
« Reply #1 on: July 31, 2012, 12:32:41 AM »
unplug all the connections to the mother board and then plug back in
Logged
maki6782
Guest
« Reply #2 on: August 26, 2012, 08:13:03 PM »
How do you unplug the motherboard?  I'm new and I'm not sure which wire/cable to pull?
Logged
Koni
Contributing NLG Member
New NLG Member 1 to 100 Post
*

Total Karma Storms: 15
Offline Offline

Posts: 79
« Reply #3 on: October 04, 2012, 09:01:42 PM »
Quote from: maki6782 on August 26, 2012, 08:13:03 PM
How do you unplug the motherboard?  I'm new and I'm not sure which wire/cable to pull?
Just saw this post, when you open the main door there is a small door in the center of the machine below the reels. The mother board sits on a shelf and you can slide it out a little to get to the harnesses. Remove each conection one at a time and reset it, then go to another one. By doing them one at a time you will not mix them. Make sure they are all seated properly. -Koni
Logged
riverratmike
New NLG Member 1 to 100 Post
**

Total Karma Storms: 4
Offline Offline

Gender: Male
Posts: 88
« Reply #4 on: October 19, 2012, 03:03:06 AM »
did you get if fixed?
Logged
Pages: [1] Go Up Print 
« previous next »
Jump to:  

SimplePortal Classic 2.0.5

If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com ™    Newlifegames.net ™    Newlifegames.org ™
   New Life Games ™    NewLifeGames ™  NLG ™ We Bring new Life to old Games ™    1-888-NLG-SLOTS ™
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.104 seconds with 20 queries.