Welcome, Guest. Please login or register.
November 21, 2024, 07:35:07 PM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  NLG Members who host their own Repair Logs of Various Games.
| |-+  Channelmaniac's Arcadecomponents' Old School Repair Logs (Moderator: channelmaniac)
| | |-+  NEC Home Consoles - TurboGrafx-16, etc
0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: NEC Home Consoles - TurboGrafx-16, etc  (Read 6152 times)
channelmaniac
Surface mount soldering geek
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 568
Offline Offline

Gender: Male
Posts: 2126


Few things are better than fixing an old game...


WWW
« on: September 16, 2008, 12:25:09 AM »

Fixed: TruboGrafx-16
Symptom: Dead. Only gives light blue screen

There is a definite lack of deep level hardware information on the web for this console.  Thanks to this, I worked backwards and pinned out the CPU a bit (address, data, power, reset, clock) and the HuCard socket from the pinouts on the Work SRAM IC.

Checked the reset line and it wasn't being held low long enough. Replaced the capacitor on the RC network feeding the reset line. Reset was working better but was not the cause of the problem.

Found a bad trace on address line A2. Patched that but was getting strange signals on the SRAM with the logic probe. Replaced the IC. Signals were better looking but system was still not booting. Cleaned the card slot (folding rough paper over the end of the card, wetting it with pure alcohol, and feeding in/out repeatedly) then resoldered it. There were quite a few solder connections on the connector that were cold - they bubbled when heated - which had to be desoldered and resoldered.

Game now boots and plays.
Logged

I have too many hobbies! Electronics, gunsmithing, Miatas, arcade games, metal detecting, etc...

http://www.arcadecomponents.com
channelmaniac
Surface mount soldering geek
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 568
Offline Offline

Gender: Male
Posts: 2126


Few things are better than fixing an old game...


WWW
« Reply #1 on: September 16, 2008, 12:26:42 AM »

Here are the pinouts for the HuC6280A CPU (a modified 65SC02) and the HuCard.

Keep in mind that these were reverse engineered from the pinout of the SRAM IC, power and ground connections, as well as the clock and reset connections. It is said that the HuCard has the same pin connections as a JEDEC style EPROM so I used that in labeling some of the higher address pins.

Email or PM me if you have any info that can be used to update these.


Code:
CPU: 

1 - A5
2 - A4
3 - A3
4 - A2 ?
5 - A1
6 - A0
7 - GND
8 - VCC
9 -
10 - CLK
11 - RESET*
12 -
13 -
14 - ?? HU #35
15 - VCC
16 - GND
17 -
18 -
19 - VCC
20 -
21 - GND
22 -
23 -
24 -
25 -
26 -
27 -
28 -
29 - GND
30 -
31 -
32 -
33 -
34 -
35 -
36 -
37 -
38 -
39 -
40 -
41 -
42 -
43 - ?? HU # 37
44 -
45 -
46 -
47 - VCC
48 - GND
49 - D2
50 - D1
51 - D0
52 - D3
53 - D4
54 - D5
55 - D6
56 - D7
57 - VCC
58 - GND
59 -
60 -
61 - SRAM CE1*
62 - SRAM OE*
63 - SRAM WE*
64 - ?? HU #24
65 - ?? HU #3
66 - A18 ?
67 - A17 ?
68 - A16
69 - A15
70 - A14
71 - A13
72 - A12
73 - A11
74 - A10
75 - GND
76 - VCC
77 - A9
78 - A8
79 - A7
80 - A6


Code:
HuCard:

1 - Back panel connector: pin C3
2 - Audio in ?? Back panel connector: B1
3 - CPU # 65  ??
4 - A16
5 - A15
6 - A12
7 - A7
8 - A6
9 - A5
10 - A4
11 - A3
12 - A2
13 - A1
14 - A0
15 - D7
16 - D6
17 - D5
18 - GND
19 - D4
20 - D3
21 - D0
22 - D1
23 - D2
24 - CPU # 64  ??
25 - A10
26 - SRAM OE*  ?? SAME AS SRAM's OE*
27 - A11
28 - A9
29 - A8
30 - A13
31 - A14
32 - A17 ??
33 - A18 ??
34 - SRAM WE*  ?? SAME AS SRAM's WE*
35 - CPU # 14  ??
36 - RESET*
37 - CPU # 43  ??
38 - VCC

 
 
Logged

I have too many hobbies! Electronics, gunsmithing, Miatas, arcade games, metal detecting, etc...

http://www.arcadecomponents.com
Pages: [1] Go Up Print 
« previous next »
Jump to:  


If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com    Newlifegames.net    Newlifegames.org
   New Life Games    NewLifeGames  NLG  We Bring new Life to old Games    1-888-NLG-SLOTS
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.083 seconds with 21 queries.