Welcome, Guest. Please login or register.
November 23, 2024, 06:06:30 PM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  **Reel Slots** Gaming Machines
| |-+  Bally Electromechanical
| | |-+  I need help with my Bally series E-2096		 0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: I need help with my Bally series E-2096  (Read 5718 times)
ShaneP
Guest
« on: July 12, 2009, 05:19:23 PM »
Hello everyone,

I have a Bally series E 2096 slot machine everything is working great however, when I pull the arm it does not retract normally.  I goes back into it's starting position very slowly.  Does anyone have any ideas or trouble shooting ideas for this problem. I'm also looking for a manual for this machine if anyone knows were I can get one.

Thanks,
Shane
Logged
FOXSSLOTS1
Resigned NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 323
Offline Offline

Gender: Male
Posts: 1239


Me at work
« Reply #1 on: July 12, 2009, 06:32:57 PM »
there is a rubber seal in the piston on the right side of the reel mech. the seal has melted - need to take the piston apart - remove the old seal - there are none of these seals available - just put some grease in the piston.
Logged
ShaneP
Guest
« Reply #2 on: July 13, 2009, 02:59:29 PM »
Thanks Fox,

Is it fairly easy to take the piston apart? I don't know much about this machine and don't want to ruin the machine if I do it wrong.  Any advice or help would be awesome.....once again thanks so much!!

Shane
Logged
FOXSSLOTS1
Resigned NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 323
Offline Offline

Gender: Male
Posts: 1239


Me at work
« Reply #3 on: July 13, 2009, 03:13:41 PM »
the piston has 4 screws holding it to the frame - one you unscrew - simply pull the plastic housing from the piston arm - then clean the rubber residue off all the parts - use cleaner like GREASE LIGHTNING.
 
Logged
Jim
MIDWEST SLOTS
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 288
Offline Offline

Gender: Male
Posts: 1172


513-984-2201
« Reply #4 on: July 13, 2009, 04:32:56 PM »
Shane       as Barry stated you have to clean all the parts ,  its not hard but it is messy, if you get that stuff on you or anything else its difficult to get it off, the only cleaner that has worked well for me was fingernail polish remover. And I always wore plastic gloves. you'll see what I mean!!!

Jim
Logged
MIDWEST SLOTS   Selling Quality Slot Machines since 1995.  We service and repair all types of slot machines. Mills, Jennings, Bally EM, 1000/2000 series, Proslot, 6000. IGT  M, M+ ,S,  S+, S-2000,  I-Game,  Universal,  Video Poker, Sigma.
Pages: [1] Go Up Print 
« previous next »
Jump to:  

SimplePortal Classic 2.0.5

If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com ™    Newlifegames.net ™    Newlifegames.org ™
   New Life Games ™    NewLifeGames ™  NLG ™ We Bring new Life to old Games ™    1-888-NLG-SLOTS ™
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.101 seconds with 20 queries.