Welcome, Guest. Please login or register.
November 23, 2024, 09:26:56 PM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  **Reel Slots** Gaming Machines
| |-+  IGT S and S-plus Reel Games. (Moderator: knagl)
| | |-+  Whats this???		 0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: Whats this???  (Read 5294 times)
HOGCAT
Guest
« on: October 26, 2009, 08:00:17 PM »
And can I unhook it without problems?????



This is in the top of cabinet.



I unplugged the power supply for it, and the machine still works.



Here is another view of it.



This plug goes up to the thing in the top cabinet, but hooks to nothing down by the hopper.



And this plug lays down by the hopperalso, not hooked up to nothing.




  The machine runs fine on quarters, but the bill mechanism does not work at all, just makes a clicking-clunk sound all the time when plugged in.  So I unhooked the bill mechanism.



  This is just my 3rd post here.  Been messing with old Mills mechanical slots for years, but decided to mess with the newer stuff!!!
  Thanks for any help!!!!
                                             GARY
Logged
Ozzy
Contributing Gold NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 254
Offline Offline

Gender: Male
Posts: 221
« Reply #1 on: October 26, 2009, 10:24:10 PM »
This is an external player tracking unit that was used by the looks of it on the old IGT system, you should be able to remove all this peripheral add on  equipment including the SMIB (slot machine interface board) without affecting your machine.


cheers


Ozzy
Logged
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447
« Reply #2 on: October 27, 2009, 01:37:03 AM »
Ozzy is correct on that Hogcat... yes
I'd like to dutifully add that it's a card reader called a Bally "Mastercom 220"...
definitely an older player tracking unit.
Logged
Ozzy
Contributing Gold NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 254
Offline Offline

Gender: Male
Posts: 221
« Reply #3 on: October 27, 2009, 10:38:27 PM »
 hissy fit hissy fit wow I do need new glasses, took a closer look at the SMIB and (how did I miss it) saw "MASTERCOM 220" embossed on it. Sure did look like an EDT pcb from the short glance I took of it.

Back in DR for a short while.

PS don't worry ALABAMA MAN, will see you when I return.


cheers


O Z Z Y
Logged
knagl
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 642
Offline Offline

Gender: Male
Posts: 5489


Kevin
« Reply #4 on: October 27, 2009, 10:51:23 PM »

Approves
Logged
If you find this site helpful, please consider making a small donation to help defray the cost of hosting and bandwidth.

Please do not PM me for support or "how to" requests -- please post your request in the forum so that everyone may assist you and everyone can benefit from the answer to your question!  Thanks! Smiley
HOGCAT
Guest
« Reply #5 on: October 28, 2009, 05:57:56 PM »
  Thanks for the info folks!!!  Stripped it all out last nite, and the machine works as good as it did before.

  Now I just got a cleat & set IC's today in the mail.  Hope this will get the bill validator working.
Logged
knagl
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 642
Offline Offline

Gender: Male
Posts: 5489


Kevin
« Reply #6 on: October 28, 2009, 06:33:23 PM »
Don't even bother with the clear chip yet -- go straight to the set chip to try and enable your validator.  The clear chip is good to have as you may need it someday, but you do not need to perform a clear to enable the validator.
Logged
If you find this site helpful, please consider making a small donation to help defray the cost of hosting and bandwidth.

Please do not PM me for support or "how to" requests -- please post your request in the forum so that everyone may assist you and everyone can benefit from the answer to your question!  Thanks! Smiley
HOGCAT
Guest
« Reply #7 on: October 28, 2009, 08:51:20 PM »
Quote from: knagl on October 28, 2009, 06:33:23 PM
Don't even bother with the clear chip yet -- go straight to the set chip to try and enable your validator.  The clear chip is good to have as you may need it someday, but you do not need to perform a clear to enable the validator.

  TOO LATE!!!  I just tried to run the clear and set thru the machine.  The clear seemed to go as per instructions, but the set did not seem to run the way the instructions said.  Now the machine does not store the credits.  But pays as soon as you win.  WHAT HAPPENED????

  Please remember I am new to these computer slots.  Years of messing with the old mechanical slots.
Logged
Foster
The S2000 GURU
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 345
Offline Offline

Gender: Male
Posts: 2872
« Reply #8 on: October 28, 2009, 09:51:44 PM »
Depending on which set chip and SP chip (game chip) you have will determine what settings are available to you.

Before playing press the cashout button it should either turn on or start flashing, either one means it will now allow wins to go to credits, and not pay from the hopper.

See Ricks FAQ for BV enable and also how to find out which SP (game) and SS (reel) chips you have.
Did the Set chip show a number when you first turned the machine on?
I have not used my set 90 in a while but I do know it shows 90 shortly after power up.
Logged
A Slot Machine and Coca-Cola Addict!!
"If it is not broke do not fix it" I keep forgetting that!
KirkLasVegas
Retired OLD Buzzard
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 233
Offline Offline

Gender: Male
Posts: 1104


Newest addition to the family, RIP Bentley
« Reply #9 on: October 28, 2009, 10:18:10 PM »
Quote from: Foster on October 28, 2009, 09:51:44 PM
Depending on which set chip and SP chip (game chip) you have will determine what settings are available to you.

Before playing press the cashout button it should either turn on or start flashing, either one means it will now allow wins to go to credits, and not pay from the hopper.

See Ricks FAQ for BV enable and also how to find out which SP (game) and SS (reel) chips you have.
Did the Set chip show a number when you first turned the machine on?
I have not used my set 90 in a while but I do know it shows 90 shortly after power up.


Foster is right...the button is payout when off and credit when on....back in the days before TITO....

Kirk
Logged
Definition of "Retirement"= to be able to get back all you contributed into it AND take some of their money too before dropping dead.
Buzz
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1158
Offline Offline

Gender: Male
Posts: 4641
« Reply #10 on: October 28, 2009, 10:18:59 PM »
For get it I was wrong
Logged
NLGs Motto  " IF IT AIN'T BROKE GIVE ME TIME IT WILL BE "
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447
« Reply #11 on: October 28, 2009, 10:29:40 PM »
The picture with the popular tree leaf by the service outlet? Scratch Head 3
That's an old S+ power supply... propeller
That's okay buzz, I think what screwed you up was
that Hogcat's machine has a BALLY MASTERCOM 220 board in it. yes
A sure telltale is that IGT loves those ORANGE stickers... rotflmao
Look at all these items I posted from Terry,Randy & April's website>>>

* IGT cash can.jpg (44.98 KB, 375x500 - viewed 276 times.)

* IGT powerswitch.jpg (29.11 KB, 150x200 - viewed 353 times.)
Logged
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447
« Reply #12 on: October 28, 2009, 10:31:02 PM »
More ORANGE stickers... Tongue Out
And lastly but not leastly...the S+ Power Supply>>>

* IGT S+ reel.jpg (32.28 KB, 150x200 - viewed 300 times.)

* S+ power supply.jpg (28.97 KB, 200x150 - viewed 340 times.)
Logged
Buzz
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1158
Offline Offline

Gender: Male
Posts: 4641
« Reply #13 on: October 28, 2009, 10:33:24 PM »
I caught it but just a little to late
Logged
NLGs Motto  " IF IT AIN'T BROKE GIVE ME TIME IT WILL BE "
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447
« Reply #14 on: October 28, 2009, 10:46:38 PM »
haha...that's okay...wanna doughnut?
Logged
Pages: [1] Go Up Print 
« previous next »
Jump to:  

SimplePortal Classic 2.0.5

If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com ™    Newlifegames.net ™    Newlifegames.org ™
   New Life Games ™    NewLifeGames ™  NLG ™ We Bring new Life to old Games ™    1-888-NLG-SLOTS ™
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.161 seconds with 21 queries.