Welcome, Guest. Please login or register.
November 22, 2024, 03:28:46 AM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  **Video Slots** Gaming machines
| |-+  IGT Fortune 1 Sircoma/Poker.
| | |-+  Just picked up a Fortune I that does not work, help?		 0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: Just picked up a Fortune I that does not work, help?  (Read 4932 times)
rilaw
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 17
Offline Offline

Gender: Male
Posts: 266


An Addiction:)
« on: November 24, 2009, 01:59:10 AM »
OK, machine looks great, almost new looking (Strange since its from 1982), anyway...  When I turn it on, all the lighting works, nothing else Scratch Head No monitor, no led on the board, no hopper, nata hissy fit Where the hell do I start??  The two circuit breakers are fine as is the fuse on the monitor. Burning Resistor  Help  Help  Help

* 2.jpg (159.32 KB, 800x1067 - viewed 430 times.)

* 1.jpg (122.76 KB, 800x600 - viewed 442 times.)
« Last Edit: November 24, 2009, 02:05:20 AM by rilaw » Logged
rilaw
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 17
Offline Offline

Gender: Male
Posts: 266


An Addiction:)
« Reply #1 on: November 26, 2009, 11:27:10 AM »
Soooo, do I assume the board and monitor in this cherry beast are  Burning Resistor ?  Just need to know where to begin....
Logged
CVslots
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 432
Offline Offline

Gender: Male
Posts: 2803



WWW
« Reply #2 on: November 26, 2009, 05:41:03 PM »
I had the same problem on a couple of the F1's, so I just unpluged mine to make sure. Both times it has been the molex plug on the bottom of the monitor. With it unpluged you will have lights but nothing else. Inspest and clean both ends and reseat it.

Good luck and Happy thinksgiving. : turkey
Logged

www.CentralValleySlots.com
Email: centralvalleyslots@yahoo.com
rilaw
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 17
Offline Offline

Gender: Male
Posts: 266


An Addiction:)
« Reply #3 on: December 03, 2009, 11:54:25 AM »
Quote from: CVslots on November 26, 2009, 05:41:03 PM
I had the same problem on a couple of the F1's, so I just unpluged mine to make sure. Both times it has been the molex plug on the bottom of the monitor. With it unpluged you will have lights but nothing else. Inspest and clean both ends and reseat it.

Good luck and Happy thinksgiving. : turkey

OK, finally had time to look at the machine.  I wish it was the plug, but it looks like the monitor chassis board is toast! hissy fit  I'm guessing my chances of finding another board are slim...  Scratch Head 

Its a RCB Model #1401

* board.jpg (135.11 KB, 800x600 - viewed 435 times.)
Logged
Belbtech
New NLG Member 1 to 100 Post
**

Total Karma Storms: 42
Offline Offline

Posts: 86
« Reply #4 on: January 06, 2010, 07:14:26 AM »
Hi (again) rilaw,

If the picture is a shot of the main board in a RGB monitor, the board is probably ok, the hot spots are pretty normal for a RGB monitor...if all the traces are good all you (normally) need to do is replace all the electrolytic capacitors...about 95% of the time this will bring a RGB back to "life".

Good luck & God bless,
Mike><>
Logged
For God so loved the world...John 3:16!
Pages: [1] Go Up Print 
« previous next »
Jump to:  

SimplePortal Classic 2.0.5

If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com ™    Newlifegames.net ™    Newlifegames.org ™
   New Life Games ™    NewLifeGames ™  NLG ™ We Bring new Life to old Games ™    1-888-NLG-SLOTS ™
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.109 seconds with 20 queries.