Welcome, Guest. Please login or register.
June 17, 2024, 05:18:57 PM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  Arcade Games, Pinball, Crane Games, Redemption Games and Other Stuff
| |-+  Other Arcade Games
| | |-+  megatouch gold motherboard.
0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: megatouch gold motherboard.  (Read 5491 times)
mikeyd
Guest
« on: January 07, 2010, 08:28:33 PM »

Hi. I have a question about the power pinout on a megatouch gold motherboard. I have 2 six pins on this board the only thing is trowing me off is
that there no white pieace to tell you that the wires go. here is a picture any help would be great.


* pins (Medium).jpg (121.65 KB, 800x600 - viewed 195 times.)
Logged
mikeyd
Guest
« Reply #1 on: January 07, 2010, 08:47:51 PM »

Hi i have a megatouch gold motherboard. i want to hook up the 2 6 pin power to it. and i dont want to smoke the board.
this board doesnt have the white on the board where i can put the black and black to make it work. any help will be great.
if you know from left to right if its +5 +5 +5
« Last Edit: January 08, 2010, 02:45:55 AM by StatFreak » Logged
StatFreak
rotaredoM etiS GLN labolG
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 756
Offline Offline

Gender: Male
Posts: 8549


Warning! Spammers will be eaten, with relish!


« Reply #2 on: January 08, 2010, 02:49:09 AM »

Hi mikeyd. Welcome to NLG  wave


I merged your two topics as it is not necessary to post a request in more than one location. Our regular members read all of the posts and it is easier to troubleshoot an issue in one thread. I kept both of your posts since they are worded differently.

Hopefully someone will have some help for you soon.


StatFreak garfield
nlg  Global Moderator
Logged

I found myself at NLG garfield  ..but got lost again on the way home. Scratch Head 2
If found, please email me to myself. Thanks. yes
       Executive member in good standing of Rick's SMAA.                              Ehhh...What's Up Doc?
channelmaniac
Surface mount soldering geek
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 568
Offline Offline

Gender: Male
Posts: 2126


Few things are better than fixing an old game...


WWW
« Reply #3 on: January 08, 2010, 10:33:03 PM »

You can pinout most of it by using a multimeter.

Find an EPROM or 7400 series logic chip. Locate the +5v pin on it and measure the continuity between that pin and the pins for the power supply connector. If it's less than 2 or 3 ohms then there are your +5v pins.

Next, find the ground pin and measure continuity to those power supply connector pins. You've just found your ground pins.

Now, the only tricky part is trying to figure out what the remaining pins are: +12? -5? Power Good? (Yes, there is a "power good" signal on PC style power supplies of the older generation) These can usually be found by tracing where they go too.

Don't know which pins are +5 and ground on the chips? http://www.datasheetarchive.com is your friend for chip information.

RJ
Logged

I have too many hobbies! Electronics, gunsmithing, Miatas, arcade games, metal detecting, etc...

http://www.arcadecomponents.com
mikeyd
Guest
« Reply #4 on: January 08, 2010, 11:54:58 PM »

Ok. Im not understanding this. So bare with me. The pins on the motherboard from left to right. I was hoping that it would be the same like the 12 pin to connect. pin 1 power good,then +5 then +12 then -12 then ground,then ground. the second set is ground,ground,-5,+5,+5.+5 here is the pics.thanks


* pins (Medium).jpg (128.49 KB, 800x600 - viewed 193 times.)

* pins77 (Medium).jpg (75.38 KB, 800x600 - viewed 211 times.)
Logged
Randy0777
Contributing NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 311
Offline Offline

Gender: Male
Posts: 561



« Reply #5 on: January 09, 2010, 08:31:50 PM »

Which platform is the "Gold" ?
Logged
mikeyd
Guest
« Reply #6 on: January 22, 2010, 12:17:09 AM »

Thanks for all the help. I was able to get it to work.
Logged
channelmaniac
Surface mount soldering geek
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 568
Offline Offline

Gender: Male
Posts: 2126


Few things are better than fixing an old game...


WWW
« Reply #7 on: January 22, 2010, 05:36:50 PM »

WOOHOO!

Can you post the final pinout for other folks that may have trouble figuring out the info?
Logged

I have too many hobbies! Electronics, gunsmithing, Miatas, arcade games, metal detecting, etc...

http://www.arcadecomponents.com
Pages: [1] Go Up Print 
« previous next »
Jump to:  


If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com    Newlifegames.net    Newlifegames.org
   New Life Games    NewLifeGames  NLG  We Bring new Life to old Games    1-888-NLG-SLOTS
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.095 seconds with 20 queries.