problems after changing from 4 reel to 3 reel

[rjpohl]

The reel was marked S/T, I never knew there was a difference and I've never had a slant top.  Thanks for all that helped on this.  After getting the reels to stop properly it played out for a spin or 2 then a 49 error code.  I couldn't get it to clear so I did a full ram clear.  After pressing button to get 61-1 I shit the door bu I can't get the 61-1 to clear.  I guess I'll research other topics and if all falls start another one.

[Foster]

Did you turn JP key after closing the door?

[rjpohl]

yes, it would clear the 49 error and replace it with other numbers, don't remember what they were.

[a69mopar]

Bob, he means with the 61- 1 error, close the door turn the key(61-5 ? 61-2 ?), (you may have to turn the key twice), then open the door and press the test button.

If it doesn't clear the 61-1 then the cash box door is open or the belly door.  Or the optics are bad.

Good luck,
Wayne

[rjpohl]

I was able to get the 61-1 cleared, I pulled board, replaced with board from working machine, started nad cleared 61 codes as usual, then re-installed the original board and then I was able to cllear the 61-1.

[a69mopar]

Glad to hear you got it working.

Thanks,
Wayne

[stayouttadabunker]

I was able to get the 61-1 cleared, I pulled board, , started nad cleared 61 codes as usual, then re-installed the original board and then I was able to cllear the 61-1.

..., I pulled board, replaced with board from working machine,....

Another good reason to have more than 1 S+!