Bally S6000 newbie,guy's are like uugghh another 88 error post!

[ls1chris]

got the printer in and pluged into the backplane, forgot all about the TITO board so it in the coin try right now, it powers up but shows error on the printer lights. pretty sure that will go away once i put the tito in and clear the MPU again. i have been working on my basement all day digging out trenches were i cut the concrete out last week and got about 9 feet of toilet/sink drain in and tied into the main. i am beat, and will play with the machine tomorrow and report back my progress.

[ls1chris]

have to work on basement for a good part of the day but during morning coffee was havin a smoke in the garage and was putting some spin time on to battle test the machine a bit and my wife came over and started playing, had a couple good hits and mentioned how cool it was and how it reminds her of vegas and we could easily fit 4 machines in the basement.
 i casually mentioned i know of 4 other "broken" machines that are reasonable ( under 450. each) and a munsters ( not sure what type this is, its a stand-up with reels and a vid screen above the reels) but the munsters has a coin in jam error showing , from searching here i think it's opti I/O board error.
hopefully road trip in order soon! anyway i was trying to play it down so i can get into setting and add TITO and disable hopper to see if the printer will cycle (although i have no vouchers for it maybe moot point for now) and when she got on there she hit something for 2000 credits. i might have to cash out and re-feed the hopper a dozen times.