Welcome, Guest. Please login or register.
July 03, 2024, 02:47:35 AM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  **Reel Slots** Gaming Machines
| |-+  IGT S2000 and Vision Games.
| | |-+  help with "reel 1 tilt"		 0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: help with "reel 1 tilt"  (Read 3314 times)
cristiancerneschi
Guest
« on: January 26, 2011, 08:53:57 AM »
hello,
I'm new here and I already start to ask help:))

I have a S2000 reel touch with this error : reel 1 tilt. the reel is really dead.  the rest, 2, 3 ,4 ,5 seems to be ok. I try everythig. change the reel in position 2, it's activated. the one from position 2 on position 1 is dead. I chech the wire, ok. I swich the controler, nothing. any ideea???

thank you very much
« Last Edit: January 26, 2011, 09:15:51 AM by cristiancerneschi » Logged
poppo
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 248
Offline Offline

Gender: Male
Posts: 3266
« Reply #1 on: January 26, 2011, 01:09:22 PM »
I'm not a S2000 expert, but if you have eliminated the reel as being bad by swapping them, and changed the MPU, all that really leaves is the wiring or the motherboard. I would double check the wiring. Make sure no pins are coming out of the plugs on both ends. Also make sure a wire didn't get cut/broken somewhere in between.

Did it work before and just quit, or did you get it this way?
Logged
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447
« Reply #2 on: January 26, 2011, 01:17:27 PM »
When you turn on the power with the door open,
are the reels "stiff"?
Try turning the reels one by one with your finger and please tell us the difference,
in resistance, between the 1st reel and the others.

Does the 1st reel work correctly when you swap it with the 2nd position on the reel shelf?
Or the does the error change to "Reel 2" error on the display?
When you say you switched "controller" - what part are you talking about?
Logged
poppo
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 248
Offline Offline

Gender: Male
Posts: 3266
« Reply #3 on: January 26, 2011, 01:24:31 PM »
Quote from: stayouttadabunker on January 26, 2011, 01:17:27 PM
Does the 1st reel work correctly when you swap it with the 2nd position on the reel shelf?
Or the does the error change to "Reel 2" error on the display?

He said the problem stayed with reel #1, (and reel #1 worked in pos #2). At least that's how I read it.
Logged
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447
« Reply #4 on: January 26, 2011, 01:30:19 PM »
Okay good,
Does the 2nd reel unit work when installed into the 1st position on the reel shelf?
I'm suspecting it's nothing more than an oxidized pin in the 1st reel Molex connector.
Or a bent pin?
Logged
poppo
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 248
Offline Offline

Gender: Male
Posts: 3266
« Reply #5 on: January 26, 2011, 01:35:39 PM »
Quote from: stayouttadabunker on January 26, 2011, 01:30:19 PM
Okay good,
Does the 2nd reel unit work when installed into the 1st position on the reel shelf?

 Sherlock Smiley
" the one from position 2 on position 1 is dead"
 Tongue Out

But I agree he needs to look closer at the wiring/connectors.
Logged
cristiancerneschi
Guest
« Reply #6 on: January 27, 2011, 08:27:27 AM »
thank you all for your support.
the problem is on MPU. I was letting that possibility the last because I don't have a spare one. as per my casino owner: "is not good spending money for spare parts. better pray nothing bad happen"  Cry Laughing  and as per law in romania I have a seal for every MPU, and that mean when I use the MPU from another machine I must keep it close for 2-3 weeks untilt somebody from gaming board come to put me another seal.
now I must send the MPU in holland, to the IGT europa for repair.

thank you very much again.

cristian
Logged
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447
« Reply #7 on: January 27, 2011, 12:29:51 PM »
I'd tell your cheapskate boss to cough up some money for spare parts!!!!  rotflmao
Logged
Pages: [1] Go Up Print 
« previous next »
Jump to:  

SimplePortal Classic 2.0.5

If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com ™    Newlifegames.net ™    Newlifegames.org ™
   New Life Games ™    NewLifeGames ™  NLG ™ We Bring new Life to old Games ™    1-888-NLG-SLOTS ™
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.106 seconds with 20 queries.