Welcome, Guest. Please login or register.
November 25, 2024, 04:59:04 PM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  Homebrew Player Tracking and EFT Systems.
| |-+  NLG Homebrew Player Tracking and EFT Systems.
| | |-+  IGT S+ / PE+ - USB to DCS Interface		 0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: IGT S+ / PE+ - USB to DCS Interface  (Read 7314 times)
TZtech
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 129
Offline Offline

Gender: Male
Posts: 1113
« on: March 07, 2011, 05:22:45 PM »
Hello All

Since Andy's App and USB to Serial converter with the FTDI chipset seems to be working nicely for I-Games I decided to do an interface for the S+/PE+ DCS Port.
Some research on the FTDI site and off I went to get one of these from my local electronics shops
http://apple.clickandbuild.com/cnb/shop/ftdichip?productID=71&op=catalogue-product_info-null&prodCategoryID=104

This interface talks at 5V TTL level which is what the DCS port wants- Added a butchered harness from another system and we have liftoff.

NB - There are timing issues with the app that Andy is aware of and working on so results may vary.

* USB To DCS.jpg (43.31 KB, 640x480 - viewed 742 times.)
Logged
bassplyr647
New NLG Member 1 to 100 Post
**

Total Karma Storms: 0
Offline Offline

Posts: 11
« Reply #1 on: March 16, 2011, 04:53:33 PM »
Could you please post the wiring connections?  I already have a MAX232 chip and board, I just need the connections.  Thanks in advance.
Logged
AndyP
NLG Member 101 to 500 Post
***

Total Karma Storms: 127
Offline Offline

Posts: 212
« Reply #2 on: March 17, 2011, 07:41:26 AM »
I detest USB for commercial applications, but over the years I insist if it must be done then I will only support FTDI chipsets!
Logged
Foster
The S2000 GURU
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 345
Offline Offline

Gender: Male
Posts: 2872
« Reply #3 on: March 17, 2011, 07:56:00 AM »
They are the same as the S+ just different J numbers.

The PE+ DCS port looks like it is J8 or J6 cant read the number on the PDF I have.
IT is a 2x5 (10 pins) connector,
Same pin numbers even though IGT tried to confuse it by moving numbers around in the drawings.

The other port that you use for +VB and the power ground is J12 same pin numbers

Unless they changed something on the PE+ you need connect both grounds together.

Poppo stated that the 74HC04 or 74HC14 is not needed but your mileage may vary.

* S+ TTL to RS232 Interface.PNG (25.71 KB, 1157x565 - viewed 1483 times.)
« Last Edit: March 17, 2011, 08:26:22 AM by Foster » Logged
A Slot Machine and Coca-Cola Addict!!
"If it is not broke do not fix it" I keep forgetting that!
TZtech
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 129
Offline Offline

Gender: Male
Posts: 1113
« Reply #4 on: March 19, 2011, 04:38:12 PM »
All

Just to clarify - This little board converts USB directly to TTL voltage levels. All that is needed extra is wiring and the DCS port connector.
If you have a serial port and want to use the RS232 Poppo and foster have built working boards and posted their schematics

Andy

I see on the FTDI website that they provide a D2XX dll that allows you to acess the FTDI chipsets directly. Dont know if the timing issues can be more easily resolved going this route but it will mean being locked in to FTDI devices (My results have been positive and they are easy to source here) - http://www.ftdichip.com/Drivers/D2XX.htm

Ian
Logged
Pages: [1] Go Up Print 
« previous next »
Jump to:  

SimplePortal Classic 2.0.5

If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com ™    Newlifegames.net ™    Newlifegames.org ™
   New Life Games ™    NewLifeGames ™  NLG ™ We Bring new Life to old Games ™    1-888-NLG-SLOTS ™
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.092 seconds with 20 queries.