Welcome, Guest. Please login or register.
June 16, 2024, 08:55:07 PM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  **Reel Slots** Gaming Machines
| |-+  SIGMA Reel Games.
| | |-+  Treasure tunnel problems------FIXED-----
0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: Treasure tunnel problems------FIXED-----  (Read 5471 times)
reefpatrol
New NLG Member 1 to 100 Post
**

Total Karma Storms: 2
Offline Offline

Posts: 79



« on: July 17, 2011, 07:43:33 PM »

Wheels spin real slow, then it says ram data is wrong turn on off reset sw
« Last Edit: July 27, 2011, 08:22:08 PM by reefpatrol » Logged
Jimise
Don't pick it up by the candle!
Contributing NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 75
Offline Offline

Gender: Male
Posts: 752



« Reply #1 on: July 18, 2011, 04:24:18 PM »

If you have a reset key, Insert it on the right hand side of the machine and turn it.

 It may ask you to do it 2 times.   See what that does.
Logged
reefpatrol
New NLG Member 1 to 100 Post
**

Total Karma Storms: 2
Offline Offline

Posts: 79



« Reply #2 on: July 18, 2011, 04:57:48 PM »

tried using the reset key a couple of times and it kept coming back. I will get sound, and it will say something about a self test right before it shows the wrong ram data
Logged
Jimise
Don't pick it up by the candle!
Contributing NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 75
Offline Offline

Gender: Male
Posts: 752



« Reply #3 on: July 18, 2011, 07:02:00 PM »

Was your machine working fine before this, Or is this something new that just started? Do you have a manual?
tried using the reset key a couple of times and it kept coming back. I will get sound, and it will say something about a self test right before it shows the wrong ram data
Logged
reefpatrol
New NLG Member 1 to 100 Post
**

Total Karma Storms: 2
Offline Offline

Posts: 79



« Reply #4 on: July 18, 2011, 09:08:09 PM »

i just got the machine and it seemed like it was going to work(never did) because I got to where you could bet 1, but then got the low battery. So I put the new battery in and this is where im at.
Logged
reefpatrol
New NLG Member 1 to 100 Post
**

Total Karma Storms: 2
Offline Offline

Posts: 79



« Reply #5 on: July 26, 2011, 04:22:45 PM »

latest update.
Because of the corded mouse dropping covered boards I replaced the distribution board and the main board and wheels.

now it goes through the start up and first says battery dead then says lamp comm error

if it makes any difference the new board that I put in still has the chips for a treasure wheel, mine is a treasure tunnel. Just didn't change em yet. Wanted to see if I could get it going.

any thoughts or suggestions ?
thanks


Logged
Jimise
Don't pick it up by the candle!
Contributing NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 75
Offline Offline

Gender: Male
Posts: 752



« Reply #6 on: July 27, 2011, 01:25:31 AM »

Your machine should work with a dead battery. On the front of your main board you will see 2 banks of dip switches.

On sw2 turn #7 to the on position. That will by-pass the battery. I have one machine working with no battery at all on it.

Also the lamp com error could be because the Treasure Wheel uses a different plug than a Treasure Tunnel.

Give that a try!  Jim.........
latest update.
Because of the corded mouse dropping covered boards I replaced the distribution board and the main board and wheels.

now it goes through the start up and first says battery dead then says lamp comm error

if it makes any difference the new board that I put in still has the chips for a treasure wheel, mine is a treasure tunnel. Just didn't change em yet. Wanted to see if I could get it going.

any thoughts or suggestions ?
thanks



« Last Edit: July 27, 2011, 01:30:49 AM by jimise » Logged
reefpatrol
New NLG Member 1 to 100 Post
**

Total Karma Storms: 2
Offline Offline

Posts: 79



« Reply #7 on: July 27, 2011, 03:21:46 AM »

Thanks,
I found the ditch setting for the battery so I got that fixed.
On the lamp comm error, if I unplug(while off) the three ribbon strips going to the display in the door then plug back in it seems to work, but the the coins will just fall through to the tray without registering. On the display "insert coins" is flashing and the dollar bill light is flashing also.
The if I turn off and back on I get the lamp comm error again
Logged
Jimise
Don't pick it up by the candle!
Contributing NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 75
Offline Offline

Gender: Male
Posts: 752



« Reply #8 on: July 27, 2011, 03:46:17 AM »

Did you put your Treasure Tunnel chips back in?  That should get rid of the lamp comm error.

 Also do you have a coin in the coin comparitor?
Logged
reefpatrol
New NLG Member 1 to 100 Post
**

Total Karma Storms: 2
Offline Offline

Posts: 79



« Reply #9 on: July 27, 2011, 07:00:51 AM »

I will put the correct chips back in as soon as I get home (work nights). Should I put all six chips from the old board into the new board ?

Yes I do have a coin in the comparator. Not sure what you call it but the flap that opens to let the coin drop is closed until you turn the machine on, then it opens allowing the coin to fall all the way through. Then as soon as you turn the machine off it closes.
Logged
reefpatrol
New NLG Member 1 to 100 Post
**

Total Karma Storms: 2
Offline Offline

Posts: 79



« Reply #10 on: July 27, 2011, 12:13:52 PM »

OK, I changed out all six chips from the old board tot the new board.  So now it has the correct treasure tunnel chips in it. That seems to have gotten rid of the lamp comm. error.

Now the coins still just fall right through into the tray and wont register anything. The green LED light is on in the inside of the comparator and it has a coin in it. The LED screen on the outside changes from insert coin to insert bill.

any suggestions ?
Logged
reefpatrol
New NLG Member 1 to 100 Post
**

Total Karma Storms: 2
Offline Offline

Posts: 79



« Reply #11 on: July 27, 2011, 08:23:15 PM »

got it working, after I changed the chips the coins would still fall through. I had turn the sensitivity the wrong way (duhhh) on the comparitor. now it seems to be working.
Logged
Jimise
Don't pick it up by the candle!
Contributing NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 75
Offline Offline

Gender: Male
Posts: 752



« Reply #12 on: July 28, 2011, 12:58:29 AM »

Thats great!  Does your machine take bills as well?

We play ours quite a bit.

Post a picture if you get a chance  yes 




* 4 sigmas2.jpg (519.11 KB, 1600x1200 - viewed 278 times.)
Logged
reefpatrol
New NLG Member 1 to 100 Post
**

Total Karma Storms: 2
Offline Offline

Posts: 79



« Reply #13 on: July 28, 2011, 03:39:10 AM »

It won't take bills yet, it takes them almost all the way in then spits it back out. Sort of sounds like the motor is tired, it sounds real weak before it spits it back.
Also need to replace several burned out bulbs on the tunnel.
Will get a picture in the morning when I get back home.
Logged
Pages: [1] Go Up Print 
« previous next »
Jump to:  


If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com    Newlifegames.net    Newlifegames.org
   New Life Games    NewLifeGames  NLG  We Bring new Life to old Games    1-888-NLG-SLOTS
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.094 seconds with 20 queries.