Multi denom

[paul]

What is the things to do from key chip config to set machine for 5 cents and have the multi denom for 1 cent for button 1 and 3  and 2 cent and 5 cent for button 3 and 4       Thanks

[Foster]

I believe you have to enable the denominations first under player denom 7.1.1.3 and assign them to the touchpad 7.1.1.4, and assign a paytable/payback percentage to the denoms in 7.1.2

I do not know if you can only use 2 denoms and assign them to 4 places on the touchpad or if you have to have 4 denoms.
I think I read on here someone has done it with 2 denom only but not sure about that.
I think it would be possible but could depend on what the game and version chips allow.

[Buzz]

Paul I ans. your other post, I didn't think about a touch pad.  I'm pretty sure you can select .01, .02. .03, & .05  Would that not give you what you need?

[paul]

I  will try what foster said and let you know what happens

[Foster]

I will explain the player denom and pay table setup
I can not explain the denom touch pad I do not have one

You have to enable Key Config menu with the key chip.
Do not close the door until you are totally done or you will exit key config menu and that menu will lock

Enter the 7.1.1.3
The Change(Service) button and bet one credit buttons will become enabled

machine will display Player denom 1
Press the bet one until you set it for $0.01 (it may be set already)
Press the Change player button the VFD Display will show Player denom 2 and disabled or a value
Press the bet one until it shows $0.02
Press the Change player button the VFD display will show player denom 3 and either disabled or a value
Press the bet one until shows a third denom you want to use (if you miss it just keep presssing it will loop back to it)
Press the change button the VFD will show Player denom 4
Press the bet one until it shows a fourth denom you want to use.
Press the Max Bet 2 times only
Now navigate into 7.1.2
The same buttons become enabled
The Change button will cycle through the denoms and the bet one will select the pay table for that denom (both buttons will loop)

I would gather the touch pad setup will work the same way but since I do not have any of that hardware I can not be sure.

[Slottex]

Reposted :       Do you have to ram clear every time if you mess up the settings by not getting multi denom. that you want ?

Thanks for a reply !!!!!!!!!

!


Got everything  working !