Welcome, Guest. Please login or register.
June 17, 2024, 11:43:39 AM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  Arcade Games, Pinball, Crane Games, Redemption Games and Other Stuff
| |-+  Other Arcade Games
| | |-+  Need Some Help with P.O.G.
0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: Need Some Help with P.O.G.  (Read 2365 times)
bamspy
Guest
« on: June 30, 2011, 11:18:13 AM »

Hi, I recent;y purchased 3 Pot Of Gold Sweepstakes machines at an auction. These do not have bill collectors but use a kiosk where you enter money. The jackpots on these are set very high, some starting at $4000. I would like to lower these settings if possible. I tried adjusting the dip switches but still cannot go below the default settings. Every manual I have read says use a key, but there is no place for any key besides the one to open the door. Is there some combination of dipswitch settings that will allow me to lower these base settings?

Thanks








MODERATOR: Modified subject to clarify and moved to P.O.G. board. SF garfield
« Last Edit: June 30, 2011, 12:09:25 PM by StatFreak » Logged
jeddybear
Guest
« Reply #1 on: July 23, 2011, 05:20:47 PM »

I can help you some thru my trial and error of these things so far---the key that they are talking about is a 3 wire take-off on the pot o gold harness--you use this to short out the board like on an 8-liner or jamma board---use a piece of wire

 HAS ANYONE HEARD FROM ROCKET LATELY?-------
Logged
TexasLexus
Guest
« Reply #2 on: October 27, 2011, 06:54:42 PM »

Sorry to jump in on this...but I am trying to get some help with the sound on my POG....and you seem to know about the harness...so :-)
Here is my problem:

I have a Pot o Gold metal cabinet game with a T340 board, running 562C software. Ever since I bought my game, I have had absolutely no sound(not even a hum). I thought it was the speaker. I ordered a replacement, and it also does not work. I tested the board on another machine and it the sound worked great.

So I think that my harness is not set up correctly. Can someone that has a pot o gold please email me and tell me which slot the speaker wires are routed to? Currently, both speaker wires on mine go to slot 7(Component side, and bottom). I get no sound....I think one of these might be in the wrong slot. Thanks in advance for your help.
Logged
Pages: [1] Go Up Print 
« previous next »
Jump to:  


If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com    Newlifegames.net    Newlifegames.org
   New Life Games    NewLifeGames  NLG  We Bring new Life to old Games    1-888-NLG-SLOTS
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.081 seconds with 18 queries.