Welcome, Guest. Please login or register.
November 23, 2024, 03:31:51 AM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  **Reel Slots** Gaming Machines
| |-+  Universal Reel/Video Games. (Moderator: uniman)
| | |-+  Possible solution with Universal Ultra mpu and back plane		 0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: Possible solution with Universal Ultra mpu and back plane  (Read 2604 times)
gposing
NLG Member 101 to 500 Post
***

Total Karma Storms: 5
Offline Offline

Gender: Male
Posts: 281
« on: September 30, 2011, 12:24:48 AM »
Thanks again for all the help getting my Slot up and running.  So far so good the mpu and backplane have been playing nice together.  One thing I found when re-installing the back plane was to leave the 4 mounting screws loose so the back plane can move up and down just a little bit.  Press the mpu board into place and wiggle it just a little up and down to make sure it is seated.  Then tighten the 4 back plane mounting screws.  It seems that the two boards line up better and the MPU seats in better.  I hope this might help someone else in the future. 

Gary

* 2011-09-20_21-46-56_521.jpg (1909.05 KB, 1840x3264 - viewed 340 times.)
Logged
uniman
Topic Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 695
Offline Offline

Gender: Male
Posts: 1830
« Reply #1 on: September 30, 2011, 01:41:29 PM »
Yes, loosening the backplane and adjusting it slightly up or down with board connected does seem to help the connection.
Nice machine! Wild Orchids is a hard one to find. It's a buy-a-pay three coin game with nudge feature.
Thanks for posting a pic!
Logged
gposing
NLG Member 101 to 500 Post
***

Total Karma Storms: 5
Offline Offline

Gender: Male
Posts: 281
« Reply #2 on: September 30, 2011, 01:55:31 PM »
It is a fun game to play.    I would like to find another Ultra.   I think it is a good first machine to work on.  The tests are so easy to run, no chip to install for resets.  I ended up giving the machine to my mother-in-law for her 70th birthday.  She loves it!   One more thing, I am having issues with the dbv145.  think it is the head.  If I can't get it working do you have one you might want to sell?  if so how much?
Logged
Pages: [1] Go Up Print 
« previous next »
Jump to:  

SimplePortal Classic 2.0.5

If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com ™    Newlifegames.net ™    Newlifegames.org ™
   New Life Games ™    NewLifeGames ™  NLG ™ We Bring new Life to old Games ™    1-888-NLG-SLOTS ™
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.091 seconds with 21 queries.