Welcome, Guest. Please login or register.
June 26, 2024, 12:01:51 AM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  **Reel Slots** Gaming Machines
| |-+  Bally Reel Games. (Moderator: a69mopar)
| | |-+  Bally S5500 Black & White Double Jackpot 		0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: Bally S5500 Black & White Double Jackpot  (Read 8052 times)
colorado
New NLG Member 1 to 100 Post
**

Total Karma Storms: 2
Offline Offline

Gender: Male
Posts: 100
« on: January 20, 2012, 12:01:35 AM »
I have a Bally S5500, one dollar-three Line slot machine.
When I put a one dollar bill into the bill acceptor, it registers 4 credits.
Does this mean it thinks it is a quarter machine ?
Is there a way to adjust this feature ?
Logged
SLOTMAN
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 34
Offline Offline

Gender: Male
Posts: 351
« Reply #1 on: January 20, 2012, 10:33:34 AM »
You need to configure the dip switches to correspond to the denomination then do a RAM CLEAR.  The dip switch configuration for the denomination is in module 2 of the 5500 manual.  Do you have a module 2 manual?  It has a detailed ram clear procedure.  In order to do it without clear chips you will need a series 92 mains.  Can you post a picture of your main eproms which will be u3,u4,u12,u15
Logged
colorado
New NLG Member 1 to 100 Post
**

Total Karma Storms: 2
Offline Offline

Gender: Male
Posts: 100
« Reply #2 on: January 20, 2012, 09:57:43 PM »
I am pretty sure they are 9200 Main's, there is a clear jumper at the right front of the board.

I have been looking in the manual, but it doesn't seem to match my board. Unless I am not looking at it right.
I have included a photo and circled JW3 and JW4.

DIP Switch Selections
Two eight-switch DIP packages labeled on the MPU
board as JW3 and JW7 set the following machine
functions:
JW3 - Denomination, Bill Acceptor, Reel Spin,
Diverter Optic, EFT present (MC=01)

sw1 sw2 sw3 sw4 Value Denomination
OFF ON  ON   OFF 0009  1

I just don't see any dip switches at JW3 or JW7.

* Picture1.jpg (270.69 KB, 1498x1119 - viewed 392 times.)
Logged
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447
« Reply #3 on: January 20, 2012, 10:55:56 PM »
At the other end of the board?
They are camouflaged... Tongue Out
Logged
colorado
New NLG Member 1 to 100 Post
**

Total Karma Storms: 2
Offline Offline

Gender: Male
Posts: 100
« Reply #4 on: January 20, 2012, 11:08:16 PM »
Are they identified as JW3. Or S1-S2 at the other end of the board.
Logged
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447
« Reply #5 on: January 20, 2012, 11:11:29 PM »
One day I pulled out my MPU and saw dipswitches all over the place.
Bally made all kinds of boards...they wanted to confuse the heck outta us.

I thought that if you had the Stay-In" mains - that all you had to do was press the
two white until the tips of your fingers turned blue?
Logged
Buzz
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1158
Offline Offline

Gender: Male
Posts: 4641
« Reply #6 on: January 21, 2012, 12:53:43 AM »
If you have 92000 mains you must move the jumper at JW 10  to do a clear.   All 8 dip switchs at JW 7 are always ON     chart below is for Dips at JW 3

* scan0023.jpg (1881.16 KB, 1700x2338 - viewed 393 times.)
Logged
NLGs Motto  " IF IT AIN'T BROKE GIVE ME TIME IT WILL BE "
SLOTMAN
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 34
Offline Offline

Gender: Male
Posts: 351
« Reply #7 on: January 21, 2012, 01:00:21 AM »
Don't forget you are wanting to change denomination so dip switches come in to play on the 5500
Logged
Buzz
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1158
Offline Offline

Gender: Male
Posts: 4641
« Reply #8 on: January 21, 2012, 01:11:19 AM »
Quote from: SLOTMAN on January 21, 2012, 01:00:21 AM
Don't forget you are wanting to change denomination so dip switches come in to play on the 5500

Correct,  JW 3 you change dip switch for denom.  JW 7 are 8 of them are always ON ! 
Logged
NLGs Motto  " IF IT AIN'T BROKE GIVE ME TIME IT WILL BE "
coorslight115
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 79
Offline Offline

Gender: Male
Posts: 2602
« Reply #9 on: January 21, 2012, 01:19:48 AM »
Looking at the pictures, he has punch out blocks and not dip switches. He might need to get some dip switches to replace those punch out blocks. That might be confusing him.
Logged
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447
« Reply #10 on: January 21, 2012, 01:23:52 AM »
That's a great sheet Buzz!

Quote from: coorslight115 on January 21, 2012, 01:19:48 AM
Looking at the pictures, he has punch out blocks and not dip switches. He might need to get some dip switches to replace those punch out blocks. That might be confusing him.

Good catch coors!
I've never seen "punch-out blocks" before.
There must of been some other kind of mains in there that didn't need dips...
but all the 5500 MPU's I've ever sen all had dips? Strange huh?
Logged
coorslight115
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 79
Offline Offline

Gender: Male
Posts: 2602
« Reply #11 on: January 21, 2012, 01:27:16 AM »
My s6000 has them...I had to buy dips to replace them
Logged
Buzz
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1158
Offline Offline

Gender: Male
Posts: 4641
« Reply #12 on: January 21, 2012, 02:20:11 AM »
colorado  Why don't we go back to where you started this thread. You want to change your machine, what do you want to change it to??  You stated it's a Dollar machine, does it take dollar size coins/tokens ??
 
 
Logged
NLGs Motto  " IF IT AIN'T BROKE GIVE ME TIME IT WILL BE "
colorado
New NLG Member 1 to 100 Post
**

Total Karma Storms: 2
Offline Offline

Gender: Male
Posts: 100
« Reply #13 on: January 21, 2012, 11:12:02 AM »
When I put a dollar bill into the bill acceptor it registers 4 credits.
I would assume it should register 1 credit.  

I did also see the chips at JW3 and JW7 that had certain sections that were
not connected at the center.  I didn't know they were called
punch out blocks.  Is it safe to assume they work similar
to a dip switch.
Connected= on.
Punched out or not connected= off.
Logged
coorslight115
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 79
Offline Offline

Gender: Male
Posts: 2602
« Reply #14 on: January 21, 2012, 12:43:40 PM »
Quote from: colorado on January 21, 2012, 11:12:02 AM
When I put a dollar bill into the bill acceptor it registers 4 credits.
I would assume it should register 1 credit.  

I did also see the chips at JW3 and JW7 that had certain sections that were
not connected at the center.  I didn't know they were called
punch out blocks.  Is it safe to assume they work similar
to a dip switch.
Connected= on.
Punched out or not connected= off.

Yes, punched out is open or off
not punched is on.

If you need a couple of dip switch packs to plug in their place I will send you a few.  PM me your address



It is hard to tell in your picture but punch block at JW3 looks like starting at the top or dot end , the first 4 look like open, open, closed, open. that would be positions 1,2,3,4

that is a 25 cent setting. Your need them to be open, closed,closed,open for a dollar setting.
« Last Edit: January 21, 2012, 12:56:35 PM by coorslight115 » Logged
colorado
New NLG Member 1 to 100 Post
**

Total Karma Storms: 2
Offline Offline

Gender: Male
Posts: 100
« Reply #15 on: January 21, 2012, 01:40:24 PM »
 wave yes wave
Please accept my thanks for all of the suggestions and help !!

Your are exactly right based on the photos these are the current settings.
Current:sw1 sw2 sw3 sw4 Value Denomination
           OFF OFF ON OFF 0011 0.25

Based on the manual this is what I will need to change it to.
Should Be:sw1 sw2 sw3 sw4 Value Denomination
               OFF ON  ON   OFF 0009  1

Respectfully  wave
Logged
coorslight115
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 79
Offline Offline

Gender: Male
Posts: 2602
« Reply #16 on: January 21, 2012, 07:02:01 PM »
Quote from: colorado on January 21, 2012, 01:40:24 PM
wave yes wave
Please accept my thanks for all of the suggestions and help !!

Your are exactly right based on the photos these are the current settings.
Current:sw1 sw2 sw3 sw4 Value Denomination
           OFF OFF ON OFF 0011 0.25

Based on the manual this is what I will need to change it to.
Should Be:sw1 sw2 sw3 sw4 Value Denomination
               OFF ON  ON   OFF 0009  1

Respectfully  wave




dip switch packs will be in Mondays mail.

Glad to help !!!
Logged
colorado
New NLG Member 1 to 100 Post
**

Total Karma Storms: 2
Offline Offline

Gender: Male
Posts: 100
« Reply #17 on: January 21, 2012, 07:14:57 PM »


YOU ROCK!!!

With sincere appreciation.. waving flag
Logged
Pages: [1] Go Up Print 
« previous next »
Jump to:  

SimplePortal Classic 2.0.5

If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com ™    Newlifegames.net ™    Newlifegames.org ™
   New Life Games ™    NewLifeGames ™  NLG ™ We Bring new Life to old Games ™    1-888-NLG-SLOTS ™
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.176 seconds with 19 queries.