Welcome, Guest. Please login or register.
November 24, 2024, 01:21:29 PM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  Progressive Controllers, Displays and Slot Toppers
| |-+  TOP THIS!!! Slot Topper Topic!
| | |-+  LED chasing lights. IGT		 0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: LED chasing lights. IGT  (Read 4262 times)
rumjar86
New NLG Member 1 to 100 Post
**

Total Karma Storms: 0
Offline Offline

Posts: 15
« on: December 23, 2013, 10:39:51 PM »
Hey guys. I have an issue with a IGT LED chasers topper ring that I can't find much details about them. I am after what the required voltage and if anyone has some idea of schematics would be even more of a help. the tag I have on it is
ASSY No. 75125201 REV A
it's from a MASH topper.
thanks
Josh
Logged
CommTech
Contributing Gold NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 251
Offline Offline

Gender: Male
Posts: 503


Joe
« Reply #1 on: December 24, 2013, 12:22:17 AM »

For IGT topper: Ring LED's are 12 VDC and the Back Light is 24 VDC.
Logged
therockinelvis
Contributing NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 99
Offline Offline

Posts: 518
« Reply #2 on: January 16, 2014, 11:41:30 AM »
orange and black/orange stripe =24 vdc
red and black/red stripe = 12 vdc
Logged
rumjar86
New NLG Member 1 to 100 Post
**

Total Karma Storms: 0
Offline Offline

Posts: 15
« Reply #3 on: March 03, 2014, 07:31:21 PM »
does anyone have info on the part that is near the 12volt power pins, I am having issues trying to figure out what it is (1A 125W <LF> 460 ) I am thinking it is a resistor but am not sure. I think it may be the issue why I can't get the LED's to run. I have tried basic continuity tests and get no readings from that one part. every other resistor and diods work fine. please any advice would be greatly appreciated.
Logged
rumjar86
New NLG Member 1 to 100 Post
**

Total Karma Storms: 0
Offline Offline

Posts: 15
« Reply #4 on: March 03, 2014, 11:05:59 PM »
just an update figured it out... it's a fuse..lol
so now the issue is do i replace it with another surface mount for now or try and solder a basic spade fuse holder on for testing.
any suggestions would be great
Logged
Pages: [1] Go Up Print 
« previous next »
Jump to:  

SimplePortal Classic 2.0.5

If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com ™    Newlifegames.net ™    Newlifegames.org ™
   New Life Games ™    NewLifeGames ™  NLG ™ We Bring new Life to old Games ™    1-888-NLG-SLOTS ™
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.071 seconds with 20 queries.