Welcome, Guest. Please login or register.
October 31, 2024, 09:21:27 PM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  NLG Members who host their own Repair Logs of Various Games.
| |-+  NLG Users Repair Log's (Moderator: channelmaniac)
| | |-+  Bell Fruit Blackjack, chip inventory
0 Members and 2 Guests are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: Bell Fruit Blackjack, chip inventory  (Read 5664 times)
nightmaretony
In Remembrance of our lost NLG Members
New NLG Member 1 to 100 Post
*

Total Karma Storms: 100
Offline Offline

Posts: 54



« on: October 21, 2011, 11:57:03 AM »

Will be getting in some wierdies for repairs, so hope that this kind of thing can help out some future tech in case of a board with burned chips.


Bell Fruit Games Blackjack

sub rom PCB
part#31-214-001

chips top to bottom
74ls00
74ls00
tms2532A   95-714A-011 $E563      program roms
tms2532A   95-714A-010 $1199
tms2532A   95-714A-009 $A243


main pcb
part#31=208-002
sticker says MK-II 271

Grid pattern, coordinate row 1, column 1 is 6845 CTRC

column 1
6845 40 pin
AMI 8234AEP S9980P Korea CPU (40 pin)
74ls244
74ls244
74ls138
tms2532A   95-714A-008 $198E   graphics roms
tms2532A   95-714A-007 $36FE
tms2532A   95-714A-006 $0EFB

column 1.5 by battery
74ls04, pin 12 bent upwards

column 2
74ls157
74ls157
2114
5101
5101
resistor pack
74ls373
74ls166 graphics
74ls166
74ls166

column 2.5 74ls04

column 3
74ls157
74ls157
74ls148
mk4802-3
74ls373
74ls244
resistor pack
74ls244
74ls04
74ls00

column 4
just below not used ribbon connector
74ls74
74ls95
74ls00
74ls74
74ls02
74ls10
74ls138
74ls139
4011
4538

column 5
ribbon connector
blank (ribbon driver?)
blank (ribbon driver?)
blank (ribbon driver?)
74ls251
blue dot on ami4808
74ls259 output driver
74ls259 output driver

column 6
mc1455 aka 555 timer
74ls74
74ls259   output driver

column 7
74ls02
74ls259 output driver

column 8
74ls04
74ls259 output driver


Logged
StatFreak
rotaredoM etiS GLN labolG
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 756
Offline Offline

Gender: Male
Posts: 8549


Warning! Spammers will be eaten, with relish!


« Reply #1 on: October 21, 2011, 05:34:00 PM »

 +1 (Karma, or whatever) applause

I think this belongs in the member repair logs board. What brand of slot is this?


StatFreak garfield
nlg  Global Moderator
Logged

I found myself at NLG garfield  ..but got lost again on the way home. Scratch Head 2
If found, please email me to myself. Thanks. yes
       Executive member in good standing of Rick's SMAA.                              Ehhh...What's Up Doc?
nightmaretony
In Remembrance of our lost NLG Members
New NLG Member 1 to 100 Post
*

Total Karma Storms: 100
Offline Offline

Posts: 54



« Reply #2 on: October 21, 2011, 10:48:27 PM »

Tis made by Bell Fruit of England. Tis not repaired yet, so it doesn't count as a proper repair. I will ask a moderator repair to move it. The information I thought might be useful to others. I hope to post more information as it gets repaired. Next one is a fun and legendary video machine....


Logged
StatFreak
rotaredoM etiS GLN labolG
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 756
Offline Offline

Gender: Male
Posts: 8549


Warning! Spammers will be eaten, with relish!


« Reply #3 on: October 22, 2011, 02:23:29 AM »

Tis made by Bell Fruit of England. Tis not repaired yet, so it doesn't count as a proper repair. I will ask a moderator repair to move it. The information I thought might be useful to others. I hope to post more information as it gets repaired. Next one is a fun and legendary video machine....

That would be me. Crazy I'll move this thread. This is an unusual slot. Even a straight list documenting all of the chips might help someone repair theirs one day. Post solutions here as you find them. If you have a question instead of a solution, just start a new thread in the video board where you started this one.

Stat garfield
Logged

I found myself at NLG garfield  ..but got lost again on the way home. Scratch Head 2
If found, please email me to myself. Thanks. yes
       Executive member in good standing of Rick's SMAA.                              Ehhh...What's Up Doc?
nightmaretony
In Remembrance of our lost NLG Members
New NLG Member 1 to 100 Post
*

Total Karma Storms: 100
Offline Offline

Posts: 54



« Reply #4 on: October 22, 2011, 02:27:18 AM »

Thanks, Stat. I couldnt find anything on this machine or the next one I am on, except for a bunch of stories. I am hoping the tech information may be of use to someone along the way in the future.

[EDIT] figured out the next step. To be able to use a standard arcade game switching power supply, the board DOEs use +5 +12 and -5 since it uses the 9980 CPU chip. The pinouts are as follows:

Power edge connector
1 unknown, orange wire
2 ground
3 +12 volts or so
4
5 -15 volts or so
6 ground
7 ground
8 +5 volts
9 +5 volts


In order to use the switcher, the board has a 7812, a 7912 and a 79l05 set of voltage regulators. you need to remove all 3 of these then jumper the ins and outs together. This will bring the -5 volts to pin 5 and +12 volts to pin 3. The 3 voltages must be kept isolated from the old power supply. I dont know the function of the orange wire so the plan here is to make an intercept harness where only the orange pin 1 and a ground go back to the old power supply and the switcher is attached to the new ones. Getting the harness connectors today so am hoping to do it this week and see if it works...





« Last Edit: October 22, 2011, 12:16:50 PM by nightmaretony » Logged
channelmaniac
Surface mount soldering geek
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 568
Offline Offline

Gender: Male
Posts: 2126


Few things are better than fixing an old game...


WWW
« Reply #5 on: October 22, 2011, 03:22:05 PM »

Tony,

Follow the orange wire through the traces on the game board... Some of the older arcade games had an off-board reset circuit that was built into the power supply board.

RJ
Logged

I have too many hobbies! Electronics, gunsmithing, Miatas, arcade games, metal detecting, etc...

http://www.arcadecomponents.com
nightmaretony
In Remembrance of our lost NLG Members
New NLG Member 1 to 100 Post
*

Total Karma Storms: 100
Offline Offline

Posts: 54



« Reply #6 on: November 06, 2011, 11:57:39 AM »

UPDATE on this repair: Added in power supply wiring, added in brackets for main boxes to mount them (there seemed to be no mounting or holder method for the main transformer box, bleah!). Best location for the new swticher is on the left side, but a SSR unit needs to move to give it room.

Tried, unit was dead. Traces down to a super intermittent power switch. Removed and bypassed power switch with owner's ok. Unit comes up, mostly blue screen, garbage on it, rolling.

Was informed by owner that this kind of unit takes about 30 seconds to come out of reset, which sort of surprised me. Still stayed in garbage.Has 3 LEDs, 3 fuses for main power (didn't make the power mod just yet, was hoping the switch was root cause). 2 power LEDs are out, fuse check this morning.

My own switcher I installed has no -5 volts so I cannot use it, owner will bring a new one. Main CPU chip looked browned out from heat, I should find a heatsink and install on it, on general principles. The main CPU is the fun and rare TMS9980. Bout 40 bucks on ebay from 2 sellers.





Logged
nightmaretony
In Remembrance of our lost NLG Members
New NLG Member 1 to 100 Post
*

Total Karma Storms: 100
Offline Offline

Posts: 54



« Reply #7 on: February 11, 2012, 01:39:54 AM »

K, had it fixed, temporarily. Re-capped the entire main power supply board. I also upped a resistor, there is a 3.3 1 watt resistor that runs hot as heck, so I replaced with a 5 watt resistor and cleaned it up. Some coild solderings were loose, revamped them./ My friend brought over 3 more power supplies that I did the same repairs to.

2 pwer supplies came up fine, 1 missed a voltage and one is missing a part, so will purchase.

Had used one of the working power supplies, and it i camed up GREAT. Let it run an hour, worked perfectly. Owner happy as heck.

owner and potential buyer came out here last night. Ran it another hour for the owner. He was a most happy camper. Then 30 minutes before the buyer showed up, IT @#$^&%@@&% DIED Sad Humming sound, blank screen., All voltage LEDs still on.

Am going to replace the caps and voltage regulators on the main motherboard since it has some T0220 ones. The hum, I think there is a short. Thankfully, I made the chip list above, I couldnt find it on my computer, so had printed it out Cheesy will update as I get it back to good state. Am thankful I also had saved the eproms to my computer, as a good just in case. Cheesy
 
After this one is done, the spare power supplies will be for sale, will offer then up here possibly.
 


Logged
Pages: [1] Go Up Print 
« previous next »
Jump to:  


If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com    Newlifegames.net    Newlifegames.org
   New Life Games    NewLifeGames  NLG  We Bring new Life to old Games    1-888-NLG-SLOTS
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.104 seconds with 21 queries.