Welcome, Guest. Please login or register.
July 05, 2024, 01:07:46 PM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  **Video Slots** Gaming machines
| |-+  Aristocrat Video Gaming Machines
| | |-+  aristocrat mark 6 button power problem		 0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: aristocrat mark 6 button power problem  (Read 6381 times)
kenokarz
Contributing Gold NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 284
Offline Offline

Gender: Male
Posts: 470
« on: March 21, 2012, 11:30:41 AM »
got a mark 6/ all deck  buttons are dead no power, never heard of a back plane going bad, check all the wires to the back plane , reset the plug, made sure no wires are shorted at the door area, any idea before i take the back plane board out ,checked the cpu and i/o board in another machine they are ok, no lights on buttons and no reponse to the machine when you push on them,  Scratch Head
« Last Edit: March 21, 2012, 06:16:11 PM by kenokarz » Logged
Gaming1
New NLG Member 1 to 100 Post
**

Total Karma Storms: 3
Offline Offline

Posts: 89
« Reply #1 on: March 23, 2012, 04:34:56 AM »
Sounds like you have no 24v is the note acceptor working and the key switch on the side
Logged
kenokarz
Contributing Gold NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 284
Offline Offline

Gender: Male
Posts: 470
« Reply #2 on: March 23, 2012, 10:18:56 AM »
yes, changed power supply also, the more i get into it . it has to be the backplane, or could be button harness. i have parts coming i hope and will let you guys know what i find, but as far as i can tell harness looks good i put it in a mvp540 but pin outs are not the same , but have not had a machine that beat me yet , it just takes more time to fix, good thing this one for myself  yes yes
« Last Edit: March 26, 2012, 05:21:23 PM by kenokarz » Logged
GameTek USA
New NLG Member 1 to 100 Post
**

Total Karma Storms: 19
Offline Offline

Gender: Male
Posts: 14
« Reply #3 on: March 26, 2012, 05:17:18 PM »
You check your driver board ? Its a small card which controls the button power and has 2 ejection levers on each side.
Logged
kenokarz
Contributing Gold NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 284
Offline Offline

Gender: Male
Posts: 470
« Reply #4 on: March 26, 2012, 05:20:29 PM »
will try that tonight , never thought of that   Duh! Duh! will let you know
Logged
GameTek USA
New NLG Member 1 to 100 Post
**

Total Karma Storms: 19
Offline Offline

Gender: Male
Posts: 14
« Reply #5 on: March 26, 2012, 05:27:43 PM »
Im almost 100 % that's what it is, Those drive your 24V or 12V for the buttons.
Logged
kenokarz
Contributing Gold NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 284
Offline Offline

Gender: Male
Posts: 470
« Reply #6 on: March 27, 2012, 10:29:48 AM »
did the simm change, used 6 and nothing more than what i already have,  Scratch Head Scratch Head so will wait for the backplane and button panel assy and test each one and let every one know whats up, thanks for the tip, but i think i got something else going on in this one
Logged
kenokarz
Contributing Gold NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 284
Offline Offline

Gender: Male
Posts: 470
« Reply #7 on: March 27, 2012, 10:31:38 AM »
did you have the simm #s im to use ???  maybe using wrong one ??? part # for the one im to use???
Logged
GameTek USA
New NLG Member 1 to 100 Post
**

Total Karma Storms: 19
Offline Offline

Gender: Male
Posts: 14
« Reply #8 on: March 27, 2012, 06:28:28 PM »
You mean the Comms Config Card on the main Logic ?
Logged
kenokarz
Contributing Gold NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 284
Offline Offline

Gender: Male
Posts: 470
« Reply #9 on: March 27, 2012, 06:39:53 PM »
yes the siim card on the side of the xp board, just like a computer ram card
Logged
Gaming1
New NLG Member 1 to 100 Post
**

Total Karma Storms: 3
Offline Offline

Posts: 89
« Reply #10 on: March 28, 2012, 01:18:40 AM »
Not certain where the machine is from. but hat board is only a comms board for printers or RS232. The board they are talking about is under the processor board on the left and has one pic chip and some surface mounted ics and is marked driver board.tha is if it is a NSW machine
Logged
GameTek USA
New NLG Member 1 to 100 Post
**

Total Karma Storms: 19
Offline Offline

Gender: Male
Posts: 14
« Reply #11 on: March 28, 2012, 04:27:23 AM »
Yea this is the comms config board but I wouldn't worry about this. If you have no 12V or 24V to your buttons its the Driver board. This would be the problem.
Logged
kenokarz
Contributing Gold NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 284
Offline Offline

Gender: Male
Posts: 470
« Reply #12 on: March 28, 2012, 10:30:38 AM »
already replaced the cpu, and the board under it the i/o driver board from another machine, this is a usa game, replaced power supper also, i have a button panel coming/ with harness and the back board , hope that does it , will try new harness 1st unless it a wire problem in the main harness some place  hissy fit hissy fit
Logged
Pages: [1] Go Up Print 
« previous next »
Jump to:  

SimplePortal Classic 2.0.5

If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com ™    Newlifegames.net ™    Newlifegames.org ™
   New Life Games ™    NewLifeGames ™  NLG ™ We Bring new Life to old Games ™    1-888-NLG-SLOTS ™
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.078 seconds with 20 queries.