Welcome, Guest. Please login or register.
November 23, 2024, 02:39:47 AM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  **Video Slots** Gaming machines
| |-+  Aristocrat Video Gaming Machines
| | |-+  aristocrat mk2.5 is it dead		 0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: aristocrat mk2.5 is it dead  (Read 7864 times)
yabyab
New NLG Member 1 to 100 Post
**

Total Karma Storms: 0
Offline Offline

Gender: Male
Posts: 16
« on: July 13, 2012, 04:38:27 AM »
need some help (maybe a lot) just picked up this machine there was no battery installed no Jackpot/Audit switches every thing else looks to be intact
installed a remote coin battery (3v) fished out what i believe to be the Jackpot/Audit wires and attached switches.don't know which is which
turn it on some buttons light up then go out screen come on as you can see for photos.
tried a couple of thing from other post with no luck
every thing seems to be frozen or not working the message on top of the screen flashes between call attendant and metering error
don't know where to start.
any help would be very much appreciated
still only very new to this

* IMG_6549.jpg (107.71 KB, 688x921 - viewed 668 times.)

* IMG_2212.jpg (91.61 KB, 764x1024 - viewed 710 times.)
Logged
scootergee
New NLG Member 1 to 100 Post
**

Total Karma Storms: 2
Offline Offline

Gender: Male
Posts: 41
« Reply #1 on: July 13, 2012, 07:12:17 PM »
where are at? aus? ifso what state i have most parts or a 2.5 like boards and stuff. scotty
Logged
proten
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 210
Offline Offline

Gender: Male
Posts: 1130
« Reply #2 on: July 13, 2012, 07:23:08 PM »
Try this.
* Mk2.5 and 540 Ram Clear.doc (14 KB - downloaded 429 times.)
Logged
One step at a time.
yabyab
New NLG Member 1 to 100 Post
**

Total Karma Storms: 0
Offline Offline

Gender: Male
Posts: 16
« Reply #3 on: July 13, 2012, 10:40:05 PM »
Tried the rest didn't seem to work.
Yes in aus Melbourne
Logged
SS308
NLG Member 101 to 500 Post
***

Total Karma Storms: 9
Offline Offline

Gender: Male
Posts: 166
« Reply #4 on: July 14, 2012, 11:58:33 AM »
Hi mate,
As Proten said it needs a ram clear as pixels are muddled & probably says metering error
follow instructions exactly & it will clear.
Logged
proten
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 210
Offline Offline

Gender: Male
Posts: 1130
« Reply #5 on: July 14, 2012, 04:23:24 PM »
First you will need to find out which wires are for the meter switch.
Connect two wires and look for the meter screen to come up.
The connect the other two wires and keep connected.
Open the door and hold the left three
red buttons on the CPU. Then it will say "Meter Reset"
, close door and turn both keys back off. Game should be ready to play.
Logged
One step at a time.
dddon
Guest
« Reply #6 on: July 14, 2012, 08:01:19 PM »
Hi from minne soda !!    I have an Aristocrat draw poker,  "microstar 2.5 built in 94 that shows a metering error , I was told I need a "clear" chip to make it work again ??can  it be similar to the machine in this thread??    dddon
Logged
proten
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 210
Offline Offline

Gender: Male
Posts: 1130
« Reply #7 on: July 14, 2012, 09:31:15 PM »
  Please Post Pictures

Allot of the older slots don't need set chips.
If its a Video slot then the reset instructions below will get it going.

You can start with step #7.
* Mk2.5 and 540 Ram Clear.doc (14 KB - downloaded 347 times.)
Logged
One step at a time.
yabyab
New NLG Member 1 to 100 Post
**

Total Karma Storms: 0
Offline Offline

Gender: Male
Posts: 16
« Reply #8 on: July 15, 2012, 11:12:04 PM »
Hi guys thanks for all your help got into the meter set 1 screen but then it comes up with a main-door switch fault and wont let me go any further. i presume that's the white switch that the door hits when closed checked it with a continuity tester and it seemed to work? checked the door optics replaced the transmiter now i can see it flashing away threw the camera but don't know how to test the receive
« Last Edit: July 18, 2012, 09:45:32 PM by yabyab » Logged
yabyab
New NLG Member 1 to 100 Post
**

Total Karma Storms: 0
Offline Offline

Gender: Male
Posts: 16
« Reply #9 on: July 19, 2012, 12:59:29 AM »
any way to bypass a main door switch fault?
Logged
Pages: [1] Go Up Print 
« previous next »
Jump to:  

SimplePortal Classic 2.0.5

If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com ™    Newlifegames.net ™    Newlifegames.org ™
   New Life Games ™    NewLifeGames ™  NLG ™ We Bring new Life to old Games ™    1-888-NLG-SLOTS ™
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.097 seconds with 20 queries.