Welcome, Guest. Please login or register.
June 16, 2024, 11:05:11 PM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  **Video Slots** Gaming machines
| |-+  Aristocrat Video Gaming Machines
| | |-+  Printer disconnect error in 3 Mark 6 machines.
0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: Printer disconnect error in 3 Mark 6 machines.  (Read 3450 times)
managerstatus
New NLG Member 1 to 100 Post
**

Total Karma Storms: 0
Offline Offline

Posts: 7



« on: February 17, 2013, 08:50:42 PM »

I have 3 machines down. All of them when down at separte times. 2 of them are the powerplay. The cables and connections are fine. The printer is good. The settings are right. It still says "printer disconnected"  bawling. Please respond.
Logged
ChizzleMonkey
New NLG Member 1 to 100 Post
**

Total Karma Storms: 4
Offline Offline

Gender: Male
Posts: 89



« Reply #1 on: February 21, 2013, 11:50:27 AM »

What do you mean by 2 of them are the powerplay? Do you mean power supply? If all three were affected at different times then the printers were swapped around from machine to machine? How do you know that the printers are good? It sounds like your machines are not "seeing" the printers or it cannot connect to it. If you're sure the printers are good then it's probably in the settings. What kind of printers? What leds, if any, are lit up on them? Have you tried to ram clear any of the 3 machines? What was the initial problem or error that ended up with your 3 machines being down? Have you ram cleared your spc2 or spc2.5 communications board?
Logged

Keep it simple.
proten
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 210
Offline Offline

Gender: Male
Posts: 1130



« Reply #2 on: February 21, 2013, 02:04:35 PM »

"Power Play" is the type of game installed.
Logged

One step at a time.
ChizzleMonkey
New NLG Member 1 to 100 Post
**

Total Karma Storms: 4
Offline Offline

Gender: Male
Posts: 89



« Reply #3 on: February 22, 2013, 09:49:06 AM »

Ah, ok, I'm not familiar with the powerplay games. I assume that the cabinets still have the same audit menus. One thing I would check is the printer firmware. Make sure it's compatible with the Mark V1's. Also check the audit menu to see if the Printer CRC Seed value is set. If the wrong value is set for the printer it will show as disconnected. Make sure in the menu you have Thermal Printer enabled as well. Hope this helps!
Logged

Keep it simple.
Pages: [1] Go Up Print 
« previous next »
Jump to:  


If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com    Newlifegames.net    Newlifegames.org
   New Life Games    NewLifeGames  NLG  We Bring new Life to old Games    1-888-NLG-SLOTS
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.077 seconds with 20 queries.