CEI Hot Slot, problem with error

[juani]

The little cap orange says 1 omm and 35.... The reels spin. But when stop, all in diferent position, shows that error. I already change the reels, but its the same.

[jbshocks]

clean the optics with a q tip and windex.  Also you can try swapping the motor and sensor assembly.  Do the reels actually clunk to a stop like a machine would in a casino ?

[jbshocks]

I had all kinds of strange errors related to reel position errors at first.  Cleaned optics and all connectors up to the optics including the edge connector.  The little silver strips need to be clean and intacts as well.  The question about the reel clunking to a stop is important.  It will help indicate which reel is a problem.  If they all just spin and kind of coast to a stop then reel one is possibly and issue. If say reel one clunks to stop but reel 2 coasts then suspect reel 3, etc. 

[juani]

I alredy find another problem,first all motors works fine, but one of this works more slow that the others. Now, this very "slow motor"  not works, I chnge the position and is the same, I need one new motor....

[jbshocks]

did the error change when you moved motor? are you in the US?

[juani]

No, the error is the same, I live in Argentina.

[jbshocks]

are you able to determine a source for the motor?  I think I have extras but they may be troublesome to ship.

[juani]

Thanks, but sure that I can find it here.

[jbshocks]

I sent you a link to a video of the CEI working.  The file was to large to upload.  The first half is normal play.  The second half where it says hold, I forced an error message and it is performing a recalibration.   Also check to make sure that the reason for the slow motor is not that the driven wheel is binding or the belt to tight.  The low voltage may well have burned it but maybe it is as simple as an adjustment.