Welcome, Guest. Please login or register.
July 01, 2024, 08:03:44 AM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  **Reel Slots** Gaming Machines
| |-+  Bally Reel Games. (Moderator: a69mopar)
| | |-+  error code 0. . . . . Bally E1275 Golden Continental		 0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: error code 0. . . . . Bally E1275 Golden Continental  (Read 1998 times)
patasch
New NLG Member 1 to 100 Post
**

Total Karma Storms: 0
Offline Offline

Posts: 3
« on: April 18, 2013, 06:34:50 PM »
hello,
here is the picture of the display located in the door.
Of power, it displays 0. . . . ., Pressing the push test, rest, display has no effect.
I replaced the battery on the motherboard and a CD4020 one leg was cut (after a reaction related to the spilled battery). Can anyone guide me and give me the meaning of this code (default processor, EPROM, RAM, ....) and how to test these. Where can I find the contents of EPROM.
thank you for your answers.

* DSC05191.JPG (1366.48 KB, 2592x1944 - viewed 197 times.)
Logged
MarkInAz
Jack of all, master on none.
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 22
Offline Offline

Gender: Male
Posts: 344
« Reply #1 on: April 19, 2013, 05:30:42 AM »
Hi Patasch,

I don't think that is a valid error code nor a power-up self-test code.  I would suspect your MPU board has a seriously malfunction. 

As for the EPROMs you should be able to buy them from some of the NLG advertisers at the middle of the home page.

You will need to get a copy of the E-1000 manual too.  There is a copy in the Download area of the site.

Hope this helps.

Mark
« Last Edit: April 19, 2013, 05:36:30 AM by MarkInAz » Logged
Its Always Something...
dhellis
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 56
Offline Offline

Gender: Male
Posts: 172
« Reply #2 on: May 26, 2013, 06:46:17 PM »
I realize that this response is more than a month after you asked the question but thought I would put in my 2 cents worth just the same.

An Error code 0 can be either the RAM board or a Buss error on your MPU board. If you remove the RAM board and the error changes to a 1 then
it it most probable that the problem is either the RAM chip(s) or something on the board.
Logged
Pages: [1] Go Up Print 
« previous next »
Jump to:  

SimplePortal Classic 2.0.5

If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com ™    Newlifegames.net ™    Newlifegames.org ™
   New Life Games ™    NewLifeGames ™  NLG ™ We Bring new Life to old Games ™    1-888-NLG-SLOTS ™
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.674 seconds with 20 queries.