Welcome, Guest. Please login or register.
November 22, 2024, 12:34:09 PM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  **Reel Slots** Gaming Machines
| |-+  IGT S2000 and Vision Games.
| | |-+  IGT S 2000 PROBLEM		 0 Members and 2 Guests are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: IGT S 2000 PROBLEM  (Read 5241 times)
slots of fun
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 9
Offline Offline

Gender: Male
Posts: 141


WAS A MEMBER BEFOR WAS LOST IN THE MOVE
« on: December 25, 2009, 10:51:32 PM »
Picked up 5 S 2000 games and 2 S 2000 Vision machine for my Christmas . Tryed to get one of the S 2000 up and running after fixing M & B door errors. Now
the reels set up than get the message TERMINAL DISABLED . If i use the key switch goes to the accounting ,history,i/o test. If i open the door and push the white button on the mpu board does the same thing. Will not let me go into the operator menus . ANY IDEAS Thanks (SLOTS OF FUN)   Help
Logged
Railroad94
In Remembrance of our lost NLG Members
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 225
Offline Offline

Gender: Male
Posts: 585
« Reply #1 on: December 25, 2009, 11:04:00 PM »
When you turn the Key and get into the attendant menu,can you get to option 6 to make sure it is not disabled.
Maybe swap boards from one of the other working machines and see what you get.
Logged
slots of fun
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 9
Offline Offline

Gender: Male
Posts: 141


WAS A MEMBER BEFOR WAS LOST IN THE MOVE
« Reply #2 on: December 26, 2009, 12:27:57 AM »
6 Would be out of service mode from the operator menu options. There are only 3 options in the attendant menu  Duh!  1.accounting 2.History 3. I/o test
 Scratch Head
Logged
Railroad94
In Remembrance of our lost NLG Members
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 225
Offline Offline

Gender: Male
Posts: 585
« Reply #3 on: December 26, 2009, 01:48:36 AM »
My mistake on the attendant menu and getting to option 6.  With multiple machines I would still do an easy board swap and see what happens otherwise you might be stuck doing a ram clear
Logged
KirkLasVegas
Retired OLD Buzzard
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 233
Offline Offline

Gender: Male
Posts: 1104


Newest addition to the family, RIP Bentley
« Reply #4 on: December 26, 2009, 02:21:08 AM »
Quote from: Railroad94 on December 26, 2009, 01:48:36 AM
My mistake on the attendant menu and getting to option 6.  With multiple machines I would still do an easy board swap and see what happens otherwise you might be stuck doing a ram clear

Bet it's looking for the SAS....
he can look at the comm settings and see if it's running and what port. If thats the case Keychip it.....


Kirk
Logged
Definition of "Retirement"= to be able to get back all you contributed into it AND take some of their money too before dropping dead.
MarlboroMan
Guest
« Reply #5 on: January 02, 2010, 06:57:49 PM »
You might check to see if you got one of the door switches installed backwards.
Logged
MarlboroMan
Guest
« Reply #6 on: January 02, 2010, 07:08:32 PM »
I say that because it sounds like you are getting a door close signal when the door is open. cheese
Logged
slots of fun
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 9
Offline Offline

Gender: Male
Posts: 141


WAS A MEMBER BEFOR WAS LOST IN THE MOVE
« Reply #7 on: January 03, 2010, 12:22:06 PM »
 Duh! no when you open the door it says m door open and when you close the door it says closure m ! thanks for you thought .  Duh!  wave Ron..............
(SLOTS OF FUN)
Logged
slots of fun
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 9
Offline Offline

Gender: Male
Posts: 141


WAS A MEMBER BEFOR WAS LOST IN THE MOVE
« Reply #8 on: January 03, 2010, 12:27:04 PM »
I think Kirk is on the right track when i get the key chip will post back .  wave Ron (SLOTS OF FUN)
Logged
MarlboroMan
Guest
« Reply #9 on: January 03, 2010, 04:34:41 PM »
Just a thought. Hope the chip thing works.
Logged
Pages: [1] Go Up Print 
« previous next »
Jump to:  

SimplePortal Classic 2.0.5

If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com ™    Newlifegames.net ™    Newlifegames.org ™
   New Life Games ™    NewLifeGames ™  NLG ™ We Bring new Life to old Games ™    1-888-NLG-SLOTS ™
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.095 seconds with 20 queries.