Welcome, Guest. Please login or register.
November 02, 2024, 01:24:08 AM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  **Reel Slots** Gaming Machines
| |-+  IGT S2000 and Vision Games.
| | |-+  What do you put under your bottom ?
0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: What do you put under your bottom ?  (Read 5067 times)
DorothyMacaw
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 21
Offline Offline

Gender: Female
Posts: 186


Fruit machine my tail feathers !!


« on: July 28, 2010, 02:00:38 AM »

My stands are covered in Formica and the machines slip and move whenever I open a door or close a door or sneeze. I know there are holes in the bottom so that you can bolt them down, but that doesn't appeal to me at the moment.

Do you have something under your machine to keep it from slipping or do you have it bolted down or do you just let it slip ? OR is there an option that I haven't thought of?

 - Dorothy
Logged

“If you can’t explain it simply, you don’t understand it well enough.”

~Albert Einstein
a69mopar
647-402-1977
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 600
Offline Offline

Gender: Male
Posts: 3508



WWW
« Reply #1 on: July 28, 2010, 02:05:14 AM »

My stands are covered in Formica and the machines slip and move whenever I open a door or close a door or sneeze. I know there are holes in the bottom so that you can bolt them down, but that doesn't appeal to me at the moment.

Do you have something under your machine to keep it from slipping or do you have it bolted down or do you just let it slip ? OR is there an option that I haven't thought of?

 - Dorothy
Hi Dorothy,
  I always recommend using carriage bolts to secure the machine to the stand.  To me this can be a safety issue where when left loose the possibility of the machine falling and hurting someone is greater.  Left on the flat they are quite stable, but who knows when a friends children come over and start pulling on the arms.  if it is in your mind to keep it unsecured, you may want to apply two sided tape such as carpet tape between the stand and the machine.  This will prevent the slide.

Thanks,
Wayne
Logged

         www.GTASLOTS.com      647-402-1977              BALLY S6000 GALLERY
Yoeddy1
The OCD kit hoarder
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 233
Offline Offline

Gender: Male
Posts: 3280



WWW
« Reply #2 on: July 28, 2010, 02:54:16 AM »

Dorothy,

Sheets of non-skid at your local Lowe's or Home Depot does a great job too.

http://www.lowes.com/pl__4294856540_4294937087_
Logged


Yoeddy's IGT Slot Machine Videos
http://www.youtube.com/user/Yoeddy1
Brianzz
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 316
Offline Offline

Gender: Male
Posts: 1520



WWW
« Reply #3 on: July 28, 2010, 08:05:07 AM »

For some reason I thought this was going to be about stools... I mean seating  bust gut laughing
Logged
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447



« Reply #4 on: July 28, 2010, 02:00:17 PM »

lol - Okay ...I'll say it >>>

"Johnson & Johnson's Baby Powder"   arrow

But to answer your question.
If you really don't want to use bolts...how about heavy duty Velcro pads?
I've seen them hold people up against walls on some T.V. show....lol

I don't really recommend this at all though...
when the door is open and you lean on it, the machine WILL fall!
I stand the though of a slot falling onto a kid....Please!!  Properly install the machine!!!
Logged
DorothyMacaw
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 21
Offline Offline

Gender: Female
Posts: 186


Fruit machine my tail feathers !!


« Reply #5 on: July 28, 2010, 02:42:48 PM »

Okay Mopar and Bunker. You have me convinced, I'll drill the stands and bolt the machines to them.

The stands are solid (no door) so I assume that drilling the stand inserting a heavy duty wall anchor and then putting a bolt into it should work. If there is a flaw in my thinking let me know.

My tool drawer is getting opened more time in the past 2 days than the previous 2 months.

 - Dorothy
Logged

“If you can’t explain it simply, you don’t understand it well enough.”

~Albert Einstein
reho33
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 146
Offline Offline

Gender: Male
Posts: 1594


Slot Losers of America / Tokie Owens


« Reply #6 on: July 28, 2010, 04:39:15 PM »

You need 1 3/4 anchor bolts (like the kind on sat dishes, with the square bottom (these fit right into the holes in the slot cabinet), put the bolts through and nuts attach from the  bottom.
Logged

** NOTE: The information contained in any of my posts relating to slot machine ownership and use is information that I have gathered from publicly known sources correspondingly under the same protections of Free Speech governed under the Laws of the United States and Canada and is for informational use only. As is my Constitutional Right under United States and Canadian Laws the redistribution of said information is considered a form of free speech. Using this information in the United States or Canada to conduct illegal gambling in states/provinces where it is unlawful has been declared against the law in those states/jurisdictions and as such I do not advocate the illegal use of such information under both the United States and Canadian Laws. All references and examples of personal experiences are hypothetical in nature, and it is up to you to determine if the information presented is applicable to your situation or not**
cowboygames
Abbys Dad
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 680
Offline Offline

Gender: Male
Posts: 3916


Happiness in life is a great dog


« Reply #7 on: July 28, 2010, 04:47:16 PM »

And if the cabinet has no access to the inside and there are no existing holes in the top then the butterfly bolts should work fine. If there are existing holes they may already have a nut mounted on the inside and you just need the right screws
Logged
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447



« Reply #8 on: July 28, 2010, 04:53:09 PM »

Dorothy,
What kind of cabinet are you using that has no door?
I can't imagine that this is a slot cabinet?
Can you post a picture here of it?
It may not be sturdy enough...
Logged
DorothyMacaw
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 21
Offline Offline

Gender: Female
Posts: 186


Fruit machine my tail feathers !!


« Reply #9 on: July 28, 2010, 05:43:08 PM »

Oh, it is heap sturdy enough Bunker. I got a hernia moving it when it came. It weighs around 70 pounds. It was made by the company that sold me the machines. It kind of reminds me of "2001 A Space Odyssey". I can hear the music pounding in my head already .. Boom, boom ........ No, wait !! That's the theme from "Jaws" !!

 - Dorothy


* DSC_0794.JPG (716.44 KB, 2000x3008 - viewed 258 times.)
Logged

“If you can’t explain it simply, you don’t understand it well enough.”

~Albert Einstein
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447



« Reply #10 on: July 28, 2010, 05:48:08 PM »

Uh....nice bottom!!  rotflmao

Before you start drilling holes in the base to attach the machine.
Make sure the front edge of the machine's base
is aligned with the front of the black base.
You want to get the machine as close to you as possible so your
knees aren't banging on the base all the time.

I'd look into installing a door on the front of the base so you can
extract the coins that fall to the drop into the bucket below.

I've seen some nice doors that guys have made with a lighted
belly glass down there that looks kinda cool at night when it's all lit up! yes
Logged
a69mopar
647-402-1977
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 600
Offline Offline

Gender: Male
Posts: 3508



WWW
« Reply #11 on: July 28, 2010, 06:24:59 PM »


This is a carriage bolt, notice the square part on the shoulder, it fits the square holes in the base of the machine.  With your stand it would be difficult to attach since you can't access the underside, unless you cut an access hole in the rear.  The butterfly anchors would likely do as someone said.  I have used screws to temporarrily attach machines in the past, however over time they could work loose. 

Bunker,  I believe the velcro suit was David Letterman.

Thanks,
Wayne
Logged

         www.GTASLOTS.com      647-402-1977              BALLY S6000 GALLERY
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447



« Reply #12 on: July 28, 2010, 06:31:54 PM »

<a href="http://www.youtube.com/v/MNfBftMWNTo&rel=0" target="_blank">http://www.youtube.com/v/MNfBftMWNTo&rel=0</a>
Logged
Pages: [1] Go Up Print 
« previous next »
Jump to:  


If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com    Newlifegames.net    Newlifegames.org
   New Life Games    NewLifeGames  NLG  We Bring new Life to old Games    1-888-NLG-SLOTS
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.127 seconds with 20 queries.