new member needs help on Saferam clear

[StatFreak]

So, what Mains and Graphics chip versions do you have?

[Budman]

I did a few more checks but I think I'm still programming something wrong after the clear chip. The coin slot worked fine before the battery went dead. All the connections look good. It's nice to have the bv working instead of putting nickels into the slot, I would just like to find out what I'm doing wrong for next time. Hate to keep bothering you for something I'm messing up.
Looks like 24 mains?
 

[StatFreak]

One thing: your graphics chips are too old.

If they work with the games that you currently have installed, then you can leave them alone for now, but you will have issues with them if you ever start trying to install different games. At some point, you should get a newer set of graphics chips from one of our vendors.

I sent you a pm.

[Budman]

Still can't get the coin validator to work. If i unplug the comparator and plug it back in, the validator makes a noise like a coin dropping through. I tried putting in a different coin in the validator slot. If the door is open, the coin will fall through as if going into the hopper. With the door closed, the coin falls into the payout tray. Nothing changes with pushing the door button other than the switch does work. I can now open and close doors and not have to reset anything.
Stumped

[Budman]

Got it working. 
Did another clear and changed to tokenization on coin acceptor and added more denominations according to StatFreak.
Game is more fun to play.
Thanks to everyone once again, especially Statfreak.