Welcome, Guest. Please login or register.
June 27, 2024, 11:51:04 PM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  **Reel Slots** Gaming Machines
| |-+  IGT S2000 and Vision Games.
| | |-+  Remove IGT 2000 hopper		 0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: Remove IGT 2000 hopper  (Read 6295 times)
FORDSBS
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 363
Offline Offline

Gender: Male
Posts: 4162


PET
« on: August 30, 2010, 09:28:41 PM »
Hi all.  I have an IGT S2000. Does anyone know the procedure to remove coin comparator & hopper.
I have ticket printer & want to eliminate coin comparator & hopper.
Thanks Ford
Logged
Bettor Slots
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 751
Offline Offline

Gender: Male
Posts: 1946



WWW
« Reply #1 on: August 31, 2010, 01:58:54 AM »
Well unless you want to make $50 or so on the parts, just leave the hopper in the machine our yank it out...does not matter.  You can leave the coin head in also so it will accept coin but it does not have to pay out coins.  OUR, if you want no coins at all, temporarily remove the comparator and bracket so that you can remove the coin head and install a chrome cover plate.  Then reinstall the comparator parts and plug it back in....unless you want to sell that part for $15 and then you just need and adapter plug where your comparator use to plug in.  I can sell you one for $1 to $10 depending on which side of the bed I woke up on...you chances are good for $1.  Confused??  Okay good, lets keep going then.  Next check to make sure you printer is plugged in and there is paper installed.  There are other posts here on NLG that cover proper paper installation.  Once accomplished, Key the machine with a 17 and Enable your printer under the Key II settings.  After that, and the reels spin up after you close the door, then open the door, press the test button, and go into the Menu finding Machine Options then go to Limits.  From there change your Hopper Limit to (0) zero.  Close the door and your good to go.
Logged
If life is like a box of chocolates....why do I always seem to end up with the butter creme?
Buzz
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1158
Offline Offline

Gender: Male
Posts: 4641
« Reply #2 on: August 31, 2010, 02:35:49 AM »
Ford  Jim just about covered everything. Here is a Pic. of the plug you will need. I got in a hurry one day and made up these two wires to replace the plug. The plug does work better. But in case you get in a hurry pins 1, 6, and 7 are hooked together.  If Jim doesn't have a chrome plate to replace the coin head, I do and  will sell it to you for same price Jim is getting for the plug. I'll even pay the shipping!!!

* PICT0167.sm.jpg (352.3 KB, 800x600 - viewed 267 times.)
« Last Edit: August 31, 2010, 01:25:11 PM by Buzz » Logged
NLGs Motto  " IF IT AIN'T BROKE GIVE ME TIME IT WILL BE "
FORDSBS
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 363
Offline Offline

Gender: Male
Posts: 4162


PET
« Reply #3 on: August 31, 2010, 09:38:20 AM »
Hey thanks guys. I don't want to sell w/hopper & coin comp. in.  I would need 6 . I guess I'll get soldering gun out & make some up.
It would be nicer w/chrome.Thanks Ford
Logged
FORDSBS
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 363
Offline Offline

Gender: Male
Posts: 4162


PET
« Reply #4 on: August 31, 2010, 09:22:36 PM »
Question from a dumbie. How do I know which is 1,6 and 7? There are no numbers on mine
Logged
FORDSBS
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 363
Offline Offline

Gender: Male
Posts: 4162


PET
« Reply #5 on: August 31, 2010, 10:17:40 PM »
Here is pic

* 100_0119.JPG (1275.43 KB, 2888x2160 - viewed 296 times.)
Logged
Tilt
Contributing Gold NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 366
Offline Offline

Gender: Male
Posts: 724
« Reply #6 on: August 31, 2010, 10:27:58 PM »
That's the hopper plug, it doesn't need a jumper.  The molex plug with jumper wire needs to go where your current comparitor and optics are plugged into.  It will be in the door, follow the wires from the optics and you'll find it.
Logged
FORDSBS
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 363
Offline Offline

Gender: Male
Posts: 4162


PET
« Reply #7 on: August 31, 2010, 10:33:55 PM »
Found it. Thanks Tilt
Logged
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447
« Reply #8 on: August 31, 2010, 10:35:16 PM »
FYI or if you ever really  wanna know -
the pin location numbers on the hopper plug are on the back of it. propeller
Logged
Buzz
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1158
Offline Offline

Gender: Male
Posts: 4641
« Reply #9 on: August 31, 2010, 11:31:23 PM »
Ford     there are 2 V notch's on the end of the  plug and 2 notch's on one side.   In the pic. I posted the notch's are to the right and the far side.  I think in this new Pic. you can see the Vs.  

If you are going to make up your own wires I suggest use plenty of solder on the ends so they will fit nice and tight, because if one of them comes loose you will get a coin out error. I'm sure there is a easier way but the only way I have found to get rid of that error is do a full clear.

I might as well make another suggestion.  Wait and see how many of the correct plugs Jim can let you have.  

* PICT0170.sm.jpg (309.51 KB, 800x600 - viewed 264 times.)
Logged
NLGs Motto  " IF IT AIN'T BROKE GIVE ME TIME IT WILL BE "
FORDSBS
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 363
Offline Offline

Gender: Male
Posts: 4162


PET
« Reply #10 on: August 31, 2010, 11:42:52 PM »
Thanks. I'll have to see if Jim has some.
Logged
Bettor Slots
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 751
Offline Offline

Gender: Male
Posts: 1946



WWW
« Reply #11 on: August 31, 2010, 11:54:14 PM »
Jim is leaving for Vegas for a week.  But he will send you a couple out as he is driving to the airport that you can use as a model to build some.
Logged
If life is like a box of chocolates....why do I always seem to end up with the butter creme?
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447
« Reply #12 on: August 31, 2010, 11:58:36 PM »
Hey! Good luck out there! Win some $$$$!!!!
Logged
FORDSBS
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 363
Offline Offline

Gender: Male
Posts: 4162


PET
« Reply #13 on: September 01, 2010, 12:16:35 AM »
Thanks Jim. Win BIG. I'll be thinking of you. GOOD LUCK.
Logged
JOHN42355
Rudys Gaming And Electronics LLC.
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 168
Offline Offline

Posts: 161


RudysDeals.com Gaming and Electronic Parts


WWW
« Reply #14 on: September 01, 2010, 12:43:39 AM »
Ford , If you need a Plug and make a jumper off of this , Then you can just pull the plug. Have them on alot of games.. TAKE A LOOK AT THE PHOTO HERE! http://rudysdeals.com/index.php?route=product/product&path=62&product_id=537     LMK , I'll jus send you one! WOW FREE.. John

* RudysDeals.com.JPG (128.61 KB, 857x287 - viewed 226 times.)
Logged
Discount Gaming Supplies And Free Manual Downloads At RudysDeals.com
JOHN42355
Rudys Gaming And Electronics LLC.
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 168
Offline Offline

Posts: 161


RudysDeals.com Gaming and Electronic Parts


WWW
« Reply #15 on: September 01, 2010, 12:48:37 AM »
Ford , I can Also send you the Chrome coin head plate cover... I have them... Enjoy

* NEWLOGOSMALLb.JPG (14.54 KB, 269x59 - viewed 621 times.)
Logged
Discount Gaming Supplies And Free Manual Downloads At RudysDeals.com
Buzz
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1158
Offline Offline

Gender: Male
Posts: 4641
« Reply #16 on: September 01, 2010, 01:48:30 AM »
Quote from: JOHN42355 on September 01, 2010, 12:43:39 AM
Ford , If you need a Plug and make a jumper off of this , Then you can just pull the plug. Have them on alot of games.. TAKE A LOOK AT THE PHOTO HERE! http://rudysdeals.com/index.php?route=product/product&path=62&product_id=537     LMK , I'll jus send you one! WOW FREE.. John


John  The plug he needs is pictured in reply # 2.
Logged
NLGs Motto  " IF IT AIN'T BROKE GIVE ME TIME IT WILL BE "
FORDSBS
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 363
Offline Offline

Gender: Male
Posts: 4162


PET
« Reply #17 on: September 01, 2010, 10:58:50 AM »
Thanks all. John, did you get message I send?
Logged
JOHN42355
Rudys Gaming And Electronics LLC.
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 168
Offline Offline

Posts: 161


RudysDeals.com Gaming and Electronic Parts


WWW
« Reply #18 on: September 01, 2010, 03:50:13 PM »
OH , OK Sorry...  You've Got Mail
Logged
Discount Gaming Supplies And Free Manual Downloads At RudysDeals.com
Pages: [1] Go Up Print 
« previous next »
Jump to:  

SimplePortal Classic 2.0.5

If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com ™    Newlifegames.net ™    Newlifegames.org ™
   New Life Games ™    NewLifeGames ™  NLG ™ We Bring new Life to old Games ™    1-888-NLG-SLOTS ™
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.105 seconds with 20 queries.