Welcome, Guest. Please login or register.
November 22, 2024, 06:05:39 PM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  **Reel Slots** Gaming Machines
| |-+  IGT S2000 and Vision Games.
| | |-+  Replace speakers		 0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: Replace speakers  (Read 4236 times)
DorothyMacaw
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 21
Offline Offline

Gender: Female
Posts: 186


Fruit machine my tail feathers !!
« on: September 08, 2010, 09:43:52 PM »

 In changing my Vision from Double Diamond Deluxe Bonus Wheel to Ms. Little Green Men the top glass for DDDBW has the LCD on the right. Ms. LGM is center mounted. I bought a center mount. Today I was going to install it and find that my machine's speakers and blocking where the mount needs to sit.

The current speakers are not the "Bat Ear" speakers. but little skinny ones with a black box inside the box top. It looks to me that if I make a cut in the box top the size to fit the longer "Bat Ear" speakers it would just be a matter of plugging the old speaker connections into the new speakers.

Surely it can't be that simple.

I searched NLG for replacing or changing speakers and see that Foster changed the entire box top, but nothing about just changing the speakers. If this has been covered in the past, can you please point me to the right thread? If you have experience with this, as always your suggestions are solicited.

 - Dorothy

* DSC_0908.JPG (723.19 KB, 3008x2000 - viewed 295 times.)

* DSC_0907.JPG (712.88 KB, 3008x2000 - viewed 310 times.)
Logged
“If you can’t explain it simply, you don’t understand it well enough.”

~Albert Einstein
Foster
The S2000 GURU
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 345
Offline Offline

Gender: Male
Posts: 2872
« Reply #1 on: September 08, 2010, 10:04:42 PM »
You have to replace top box to use the ear speakers.
You will need the top box, ear speakers, power distribution board, misc harnesses and a few other parts.
I did it to my vision ready machine.

Otherwise, You have to cut back the particle board side to allow the speakers to recess into the top box plus drill holes for the speaker screws and wires
I don't have a shop area do such things so I chose to buy 2 top boxes 9" and Round Top, Due to the topper it takes me about an hour to change it out.
« Last Edit: September 08, 2010, 10:13:39 PM by Foster » Logged
A Slot Machine and Coca-Cola Addict!!
"If it is not broke do not fix it" I keep forgetting that!
DorothyMacaw
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 21
Offline Offline

Gender: Female
Posts: 186


Fruit machine my tail feathers !!
« Reply #2 on: September 08, 2010, 11:06:53 PM »
Thanks Foster.

I may be a bit naive but just looking at the top. The sides seem to be held on by 4 Phillips head screws. If I removed the sides and took them to someone with a bandsaw ... snip and snip through the Formica and particle board. A couple holes for the screws and the wires in the metal case. The speakers in my IDOJ (Bat Ears) look like they would just plug into the existing wires in the Ms. LGM machine.

 - Dorothy
Logged
“If you can’t explain it simply, you don’t understand it well enough.”

~Albert Einstein
brichter
Spaced Alien
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 440
Offline Offline

Gender: Male
Posts: 2374



WWW
« Reply #3 on: September 09, 2010, 12:41:55 AM »
Don't cut your top box just yet... there was a thread on the old site where someone had notched the speakers to fit the Vision cabinet. maybe one of the admins know where to look for the old stuff?
Logged
Thanks,
Bill
dpalmi
Contributing Gold NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 291
Offline Offline

Gender: Male
Posts: 819



WWW
« Reply #4 on: September 09, 2010, 12:56:20 AM »
Hello all!

I have had three or four S2000 machines that this was done on.  You could tell someone made the hole in the wood sides bigger to fit the bat speakers and drilled some holes to mount them.  I have not done it myself, but yes - it is that easy and I have seen it.  From the outside of the machine, you would never be able to tell...

I just noticed I still have one...lol.  I have included some pics...

Dan #2

* pic1.jpg (121.97 KB, 800x600 - viewed 268 times.)

* pic2.jpg (102.11 KB, 800x600 - viewed 267 times.)
Logged
A great man once said, "I was told last time I would get a piece of cake."
DorothyMacaw
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 21
Offline Offline

Gender: Female
Posts: 186


Fruit machine my tail feathers !!
« Reply #5 on: September 09, 2010, 01:39:54 AM »
Brichter

Yes !! That would be ideal, If the Admins might know how to find that thread it would be fantastic.

Dpalmi

That is exactly what I was thinking of doing, but the idea of notching a pair of speakers sounds a lot more attractive than modifying an entire case. Thank you for the pictures, I think I'll download them into my project folder, just in case.

 - Dorothy
Logged
“If you can’t explain it simply, you don’t understand it well enough.”

~Albert Einstein
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447
« Reply #6 on: September 09, 2010, 12:33:04 PM »
The 2nd picture that dpalmi put up is excellent really and I do think it would work.
Looks like they attached the speakers to a small metal flat bar with
drilled holes to hold the speaker up against the top box.

It's a workable mod but I'm wondering - would it be that impossible
to find the correct Vision topbox speakers instead?
I'm sure that one of our vendors may have the correct pair of Vision speakers to sell you
if you were to put up an ad for your needs in the "classifieds" section of NLG?
Logged
DorothyMacaw
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 21
Offline Offline

Gender: Female
Posts: 186


Fruit machine my tail feathers !!
« Reply #7 on: September 09, 2010, 12:57:33 PM »
Bunker

Your suggestion is the ideal one. What concerns me the most is finding a box top where the side Formica match's the bottom.

 - Dorothy
Logged
“If you can’t explain it simply, you don’t understand it well enough.”

~Albert Einstein
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447
« Reply #8 on: September 09, 2010, 02:57:45 PM »
Quote from: DorothyMacaw on September 09, 2010, 12:57:33 PM
Bunker

Your suggestion is the ideal one. What concerns me the most is finding a box top where the side Formica match's the bottom.

 - Dorothy

Oh...I didn't know that your top didn't match the bottom box...

 face in palm

scratch that...you oughta post a pic of your bottom in the want ad for the topbox...   muted no

uh...scratch that...( I need a smiley of me digging a hole...)

uh...You know what I mean!  yes  rotflmao I hope you find one!!! propeller ...I gotta go!  Cactus
« Last Edit: September 09, 2010, 03:03:17 PM by stayouttadabunker » Logged
brichter
Spaced Alien
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 440
Offline Offline

Gender: Male
Posts: 2374



WWW
« Reply #9 on: September 10, 2010, 12:23:06 AM »
Quote from: stayouttadabunker on September 09, 2010, 02:57:45 PM
Quote from: DorothyMacaw on September 09, 2010, 12:57:33 PM
Bunker

Your suggestion is the ideal one. What concerns me the most is finding a box top where the side Formica match's the bottom.

 - Dorothy

Oh...I didn't know that your top didn't match the bottom box...

 face in palm

scratch that...you oughta post a pic of your bottom in the want ad for the topbox...   muted no






 Clap Clap applause applause Clap Clap applause applause

Never seen someone get both feet all the way down their throat in one post before...  Cry Laughing Cry Laughing Cry Laughing
Logged
Thanks,
Bill
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447
« Reply #10 on: September 10, 2010, 09:55:40 AM »
My wife has witnessed this phenomenon many times over... rotflmao
Logged
StatFreak
rotaredoM etiS GLN labolG
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 756
Offline Offline

Gender: Male
Posts: 8549


Warning! Spammers will be eaten, with relish!
« Reply #11 on: September 10, 2010, 01:14:50 PM »
Quote from: brichter on September 10, 2010, 12:23:06 AM
Quote from: stayouttadabunker on September 09, 2010, 02:57:45 PM
Quote from: DorothyMacaw on September 09, 2010, 12:57:33 PM
Bunker

Your suggestion is the ideal one. What concerns me the most is finding a box top where the side Formica match's the bottom.

 - Dorothy

Oh...I didn't know that your top didn't match the bottom box...

 face in palm

scratch that...you oughta post a pic of your bottom in the want ad for the topbox...   muted no
Clap Clap applause applause Clap Clap applause applause
Never seen someone get both feet all the way down their throat in one post before...  Cry Laughing Cry Laughing Cry Laughing

Quote from: stayouttadabunker on September 10, 2010, 09:55:40 AM
My wife has witnessed this phenomenon many times over... rotflmao

You two set this up SO well.  It's too bad I can't pull the trigger. Tongue Out   PG13 site and all that. arrow frying pan bust gut laughing bust gut laughing bust gut laughing

SF garfield


Clue: Linda Susan Boreman
Logged
I found myself at NLG garfield  ..but got lost again on the way home. Scratch Head 2
If found, please email me to myself. Thanks. yes
       Executive member in good standing of Rick's SMAA.                              Ehhh...What's Up Doc?
Pages: [1] Go Up Print 
« previous next »
Jump to:  

SimplePortal Classic 2.0.5

If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com ™    Newlifegames.net ™    Newlifegames.org ™
   New Life Games ™    NewLifeGames ™  NLG ™ We Bring new Life to old Games ™    1-888-NLG-SLOTS ™
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.111 seconds with 20 queries.