Welcome, Guest. Please login or register.
April 28, 2024, 07:40:07 PM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  General NLG Chat
| |-+  NLG Members Users Request.
| | |-+  I have all Manuals in PDF form!
0 Members and 1 Guest are viewing this topic. « previous next »
Pages: 1 2 [3] Go Down Print
Author Topic: I have all Manuals in PDF form!  (Read 50130 times)
ROCKET
ROCKET
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 430
Offline Offline

Gender: Male
Posts: 1278


I DONT SELL ON EBAY ITS NOT ME .


« Reply #50 on: April 08, 2013, 10:45:12 AM »

Looking for a manual for a 831 or 809 that will show the wiring for the bell circuit and also the insert coin and coin accepted and winner paid lights. Would save me a lot of meter time if you do. Also I have a sound box with a chime bar and coil that strikes it mounted inside the 809 machine behind and below the handle. I guess its a jackpot chime. Do you know anything about this and where I can find the wiring diagram for that circuit.
Thanks Dave

ONCE AGAIN TRY SENDING NEW LIFE GAMES MEMBER : FOXSLOTS !! A PERSONAL MESSAGE .. =P.M.
Barry is the G.O.D. when it comes to old BALLY MACHINES
Logged

The content of your character is your choice. Day by day, WHAT YOU CHOOSE TO POST , what you think & what you do is who you become.
David B Fowler
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 39
Offline Offline

Gender: Male
Posts: 224


Panhead


WWW
« Reply #51 on: April 08, 2013, 11:11:05 AM »

I know he sells everything under the sun for the Bally EM's but, is he ok to contact about repair issues? I am trying to look here so my issues will be able to be read by others who might benefit as well as I from the posts. I dont want to be a bother to anyone.
Logged

Still playin in the mud ..... after all these years.
ROCKET
ROCKET
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 430
Offline Offline

Gender: Male
Posts: 1278


I DONT SELL ON EBAY ITS NOT ME .


« Reply #52 on: April 08, 2013, 11:42:05 AM »

I know he sells everything under the sun for the Bally EM's but, is he ok to contact about repair issues? I am trying to look here so my issues will be able to be read by others who might benefit as well as I from the posts. I dont want to be a bother to anyone.
Barry is a "GREAT GUY"  if he is around ?? not out FISHING  for STRIPERS IN MASS. LOL he will reply to your question ..just keep it simple ..dont tell him your life story lol ..stick to the question at hand .
tell him  Rocket said to PM you ..
Logged

The content of your character is your choice. Day by day, WHAT YOU CHOOSE TO POST , what you think & what you do is who you become.
David B Fowler
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 39
Offline Offline

Gender: Male
Posts: 224


Panhead


WWW
« Reply #53 on: April 08, 2013, 11:53:02 AM »

ok... thanks and I will
Dave
Logged

Still playin in the mud ..... after all these years.
gposing
NLG Member 101 to 500 Post
***

Total Karma Storms: 5
Offline Offline

Gender: Male
Posts: 281



« Reply #54 on: April 08, 2013, 07:00:29 PM »

Do you have a manual for bally 1090-18 slot? 

I could use one for an 1401 monitor that came out of an IGT video poker machine.
Logged
scott66
New NLG Member 1 to 100 Post
**

Total Karma Storms: 0
Offline Offline

Posts: 1



« Reply #55 on: June 23, 2013, 07:26:37 AM »

Hello, new member, first time poster!! I was wondering if i could get the manual for the Konami K2V 1.5? my email is darke59@hotmail.com

Thanks heaps!!
Logged
Malembe
New NLG Member 1 to 100 Post
**

Total Karma Storms: 0
Offline Offline

Posts: 13



« Reply #56 on: July 18, 2013, 07:59:59 PM »

Well...i need am operator instructions manual with all the boards circuits schema for bally 5000 plus video poker before and after 1992. Smiley Maybe i ask too much! ioanpetcu@gmail.com
Logged
hammer0422
New NLG Member 1 to 100 Post
**

Total Karma Storms: 2
Offline Offline

Posts: 29



« Reply #57 on: July 27, 2013, 11:07:04 PM »

Might stump you on this one ........ looking for a manual for Tdc joker 7 .. Thanks


* slot machine.jpg (23.71 KB, 230x408 - viewed 458 times.)
Logged
grahamdann
New NLG Member 1 to 100 Post
**

Total Karma Storms: 0
Offline Offline

Posts: 6



« Reply #58 on: July 28, 2013, 12:29:12 AM »

hello no idea if this is correct. i have a australian first edition blue moon igt slot machine . im chasing the wirring schematic for the 6 wires that goes into the back of the female plug for the coin hopper as the plug wasnt attached and pulled away from the wires when i removed the coin hopper . can anyone direct me please regards graham
Logged
grahamdann
New NLG Member 1 to 100 Post
**

Total Karma Storms: 0
Offline Offline

Posts: 6



« Reply #59 on: July 28, 2013, 01:19:39 AM »

the wires in question with plugs attached to go into back of female fitting which wasnt secured are as follows
thin red wire
thin purple wire
grey thin wire
thick blue wire
thick brown wire
combined green/yellow 2 thick wires and white/red thin wire into one plug ( these are grounded)
Logged
grahamdann
New NLG Member 1 to 100 Post
**

Total Karma Storms: 0
Offline Offline

Posts: 6



« Reply #60 on: July 28, 2013, 01:23:22 AM »

the hopper is wired to the male plug as follows
#7 orange
#8 yellow
#9 green/yellow earthed
#10 red
#11 white/black
#12 white/red          regards graham
Logged
jalley
New NLG Member 1 to 100 Post
**

Total Karma Storms: 0
Offline Offline

Posts: 1



« Reply #61 on: September 10, 2013, 07:17:07 PM »

I have a Bally 809-2T Double Up nickel slot machine, does anyone know where i can get a manual for it? Thanks
Logged
Lost coin
New NLG Member 1 to 100 Post
**

Total Karma Storms: 0
Offline Offline

Posts: 1



« Reply #62 on: September 12, 2013, 12:13:30 PM »

I am chasing manuals for these two if anyone can help, they are 1985 models. Aristocrat 5 reel inca pokie, universal 5 reel pokie. Firebird One has game invalid.....meter error displayed, the other shows codes 0540 and 0008 in display led area
 sixthscence@hotmail.com.
Logged
Dennoman
Contributing NLG Member
New NLG Member 1 to 100 Post
*

Total Karma Storms: 21
Offline Offline

Gender: Male
Posts: 35



« Reply #63 on: September 29, 2013, 08:36:41 PM »

Do you have a manual for Blazing 7's S5500 S63M3WT-10?

Thanks so much.
Logged
David B Fowler
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 39
Offline Offline

Gender: Male
Posts: 224


Panhead


WWW
« Reply #64 on: September 29, 2013, 11:03:48 PM »

WOW ... great offer. I have a IGT -M machine and a Bally 831, 809 and a 873 that I could use one for.
Logged

Still playin in the mud ..... after all these years.
NoMatch
New NLG Member 1 to 100 Post
**

Total Karma Storms: 0
Offline Offline

Posts: 3



« Reply #65 on: November 10, 2013, 12:55:21 AM »

I'm after a manual for 1997 Aristocrat Bear Essentials pokie machine. Can you help? howard@nomatch.co.nz
Cheers
Logged
Trout
New NLG Member 1 to 100 Post
**

Total Karma Storms: 0
Offline Offline

Posts: 4



« Reply #66 on: November 25, 2013, 08:49:07 PM »

I need a manual and anything i can find for a dec of 1980 sircoma 1090-37 slot 3 wheel quarter op 1-3 coin with summit internals all serial matched system so it was built this way but i cannot find anything on this machine and it was built at a time that Si Redd was supposedly only building b/w video poker machines and the game is called "Dream Sevens" I had it appraised to be worth 2,000 - 2,500 if working again it was working fine then out of the blue the wheels quit stopping and locking into a payout. I am trying to figure out if its a solinoid or the slot board or something on the slot board,.. And I would just like to have a service manual , parts manual, and maint manual if there is one for this machine everything works but that if I manually push the stop bar actuator they will lock into a pay or no pay slot,. and I do not see the solenoid kicking it to stop the spin,.. please help as none of the repair shops out here work on these machines im on my own and need to get it up and running so I can stop my wife from going to the casino again lol,..

Thanks for your time
Trout
Logged
thatsnotgood
New NLG Member 1 to 100 Post
**

Total Karma Storms: 0
Offline Offline

Posts: 16



« Reply #67 on: January 25, 2014, 03:17:02 AM »

do you have a manual for a IGT S2000 9 line 3 reel triple star allnjns@gmail.com
Logged
farmer9
New NLG Member 1 to 100 Post
**

Total Karma Storms: 0
Offline Offline

Posts: 10



« Reply #68 on: February 02, 2014, 10:59:53 PM »

need manual or troubleshooting guide for Williams Top Cat......available? thx
Logged
Pages: 1 2 [3] Go Up Print 
« previous next »
Jump to:  


If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com    Newlifegames.net    Newlifegames.org
   New Life Games    NewLifeGames  NLG  We Bring new Life to old Games    1-888-NLG-SLOTS
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.115 seconds with 19 queries.