WTS ~ Bettor TITO has arrived !!!

[FORDSBS]

Thanks Jim. If the new version will soon be coming out I'll wait & get a few of the new ones.

[Bettor Slots]

Thanks Jim. If the new version will soon be coming out I'll wait & get a few of the new ones.

LOL...I guess that depends on your definition of "soon".  Too many of my OCD driven clients (including me !!!)....that means NOW....LOL.  I'm not one to rush anything out no matter what it is.  I plan to be fully versed in 90% of all the potential troubleshooting issues before it goes out.  Currently our plan is to release to a few current customers in about a months time as BETA testers.  In about two months time it will be offered as a whole to our current customers and then immediately after that offered to the public.

[FORDSBS]

 

[Bettor Slots]

Here is a quick demo video of one of my favorite features -  the MASTER LOCK DOWN....

This is great for a couple of purposes in my mind...you can lock down machines for a night or evening so that the kiddies can not get into them and make a racket when you don't want them too.  Or in another scenario, if you are leaving town and don't want the teenies messing around with them, you can lock down and then turn the machine(s) off.  If they get turned back one while you are gone they will still be locked down until you release them.


<a href="http://www.youtube.com/v/Lp-L9n2-C8E&rel=0" target="_blank">http://www.youtube.com/v/Lp-L9n2-C8E&rel=0</a>

[Roninva]

How do I get this and will it work on other machines. I have 3 IGT PE Plus pokers without ticket printers, 1 IGT S+, 3 s2000's and 2 CDS games. ??

[Bettor Slots]

How do I get this and will it work on other machines. I have 3 IGT PE Plus pokers without ticket printers, 1 IGT S+, 3 s2000's and 2 CDS games. ??

I sent you a PM.  Here again is our current list of machines that we are compatible with (note the list will change slightly with the new Deluxe series to say that your game software must be using IGT SAS v6.0 or newer):

IGT S2000 3-Reel
IGT S2000 4-Reel
IGT S2000 5-Reel
IGT S2000 Barcrest 3 and 5 Reel
IGT S2000 VISION 3 and 5 Reel
IGT S2000 Reel Touch
IGT Game King I-Game and I-Game Plus (3902 and 044 AVP setups)

Bally Alpha Series including S, M, and V series Reels and Video

Williams BB1 3 and 5 reel machines
Williams BB1 Video, both single and dual
Williams BB2 (seems okay but some anomalies)

[Regislive]

How do I get this and will it work on other machines. I have 3 IGT PE Plus pokers without ticket printers, 1 IGT S+, 3 s2000's and 2 CDS games. ??

I sent you a PM.  Here again is our current list of machines that we are compatible with (note the list will change slightly with the new Deluxe series to say that your game software must be using IGT SAS v6.0 or newer):

IGT S2000 3-Reel
IGT S2000 4-Reel
IGT S2000 5-Reel
IGT S2000 Barcrest 3 and 5 Reel
IGT S2000 VISION 3 and 5 Reel
IGT S2000 Reel Touch
IGT Game King I-Game and I-Game Plus (3902 and 044 AVP setups)

Bally Alpha Series including S, M, and V series Reels and Video

Williams BB1 3 and 5 reel machines
Williams BB1 Video, both single and dual
Williams BB2 (seems okay but some anomalies)

I thought this also worked with the Bally 6000?  Is that in the works or are they to old to bother supporting?

Thanks

[mvco]

Here is what may be a stupid question about this system, but here goes.  Most of our machines are dollar denomination, but also have a couple penny machines. 
When cashing out a ticket on a penny machine, if the amount is not in an even dollar amount, none of the other machines will accept that voucher.  Whereas in a real casino, they would be accepted, but a ticket for the odd change would be produced.  can I change a setting to make this work, or is that just the way it is?  S2000's are what they are installed in.
thanks, if anyone has any ideas.

[Bettor Slots]

I thought this also worked with the Bally 6000?  Is that in the works or are they to old to bother supporting?

Bally S6000 support is in the works.

Most of our machines are dollar denomination, but also have a couple penny machines.  
When cashing out a ticket on a penny machine, if the amount is not in an even dollar amount, none of the other machines will accept that voucher.  

This is just a setting issue.  On an IGT machine, your Accounting denomination can be set for a penny and then you can further make your Coin and Player Denom's a larger amount, like a dollar in your case.  Similarly on an Alpha or BB, the Base Denom can be set for a penny but your Game can be something higher.

[mvco]

Thanks Jim, will give that a try, changing the accounting denomination.

[Bettor Slots]

I got a couple of emails in the past week with "seeing is believing" requests.   

First one here was from a friend and customer of mine that likes to have "for fun" slot tourneys with friends.  He has them rotate across platforms and saves the scores.  Anyway, currently he has to add credits to each of his 8 machines individually bending over and around people and of course I'm sure it is a little cumbersome.  With the new Bettor TITO Deluxe product this is no longer necessary as you can add credits to them all at once.

   LOL...but you might want to Master Mute your machines temporarily while they all get load the credits as it is LOUD !!!

<a href="http://www.youtube.com/v/Dp9qvdivE68&rel=0" target="_blank">http://www.youtube.com/v/Dp9qvdivE68&rel=0</a>

[Bettor Slots]

And the next one here is showing how quickly you can change the Ticket Header on one of your machines....especially great on the S2000's, Reel Touches, and Visions 



<a href="http://www.youtube.com/v/emlZ3LKK0q4&rel=0" target="_blank">http://www.youtube.com/v/emlZ3LKK0q4&rel=0</a>

[Regislive]

I thought this also worked with the Bally 6000?  Is that in the works or are they to old to bother supporting?

Bally S6000 support is in the works.

Excellent news!!!!!  Thanks Jim, can't wait till the new ones are out I'm taking two, unless we find a Dean Martin....then taking three!  LOL 

[Ed_milehi]

Anyways....long story short..... CJ and I met Joey and NLG was born.......

Jay...nice to see the history of how NLG was born.  I knew a little of the history but not all of it.

So when you say for the future that the display a lot of us have are you referring to the display in the player tracking system because that will be amazing to change that!

Correct... referring to the Bally Mastercom display and the desire of some to easily change it's display to some kind of custom header.  Beyond that, at least with the Tito Deluxe product we have no other plans for further development, for example, user input of adding credits to the machine via the key pad.  That kind of setup is labor intensive to configure and in our mind becomes obsolete since these features are now more easily and quickly accessed directly through your phone or tablet.

I know some functions will not work on the S2000 with SG000598 game chips

You are correct in saying that some game setups will not allow some or all of the functions of the Deluxe board.  The setup of course has to be using SAS v6.0 or newer.  So for example, a machine using SG000251 (using SAS v5.10) will not work with this product, so in that case, when possible, the software will be need to be updated.  However in cases of two common game chips used, like SG000363 and SG000598 (SAS v6.0 and SAS v6.02 respectively) so far we are finding them to work.  I think the downer for some might be when looking at a Game King I-Game or I-Game Plus running older software....like Little Green Men, or South Park, or Game King 4.3 since they use pre-SAS v6.0 software and so as a result will not be able to use the new features, but of course can still use ticket in and out.[/b]

When the new version comes on market will a person that has one of the first versions have to send his back to have it updated or is it an add on that we keep the board we have & add new device to it?

All cabling will stay in place.  The harnesses are unplugged and then the TITO board easily pulled out since it is just Velcro-ed to the cabinet.  Then shipped back for an exchange.  Incidentally the original board is maintained on both the original product and the new deluxe....simply we are adding an Ethernet port.  ALSO, very important for all to know...if your machine is already configured and working with the original Bettor TITO product, when the Deluxe version is returned, you just have to plug it back in....no additional key-chipping or menu setups on your machine will be required for it to run.

How can I tell what version of SAS my game chips use, I have SG000523 and if they're not 6.0 or > is there another set of chips I could use?

[FORDSBS]

Jim, any word when updates will be available?

[jdkmunch]

Anyways....long story short..... CJ and I met Joey and NLG was born.......

Jay...nice to see the history of how NLG was born.  I knew a little of the history but not all of it.

So when you say for the future that the display a lot of us have are you referring to the display in the player tracking system because that will be amazing to change that!

Correct... referring to the Bally Mastercom display and the desire of some to easily change it's display to some kind of custom header.  Beyond that, at least with the Tito Deluxe product we have no other plans for further development, for example, user input of adding credits to the machine via the key pad.  That kind of setup is labor intensive to configure and in our mind becomes obsolete since these features are now more easily and quickly accessed directly through your phone or tablet.

I know some functions will not work on the S2000 with SG000598 game chips

You are correct in saying that some game setups will not allow some or all of the functions of the Deluxe board.  The setup of course has to be using SAS v6.0 or newer.  So for example, a machine using SG000251 (using SAS v5.10) will not work with this product, so in that case, when possible, the software will be need to be updated.  However in cases of two common game chips used, like SG000363 and SG000598 (SAS v6.0 and SAS v6.02 respectively) so far we are finding them to work.  I think the downer for some might be when looking at a Game King I-Game or I-Game Plus running older software....like Little Green Men, or South Park, or Game King 4.3 since they use pre-SAS v6.0 software and so as a result will not be able to use the new features, but of course can still use ticket in and out.[/b]

When the new version comes on market will a person that has one of the first versions have to send his back to have it updated or is it an add on that we keep the board we have & add new device to it?

All cabling will stay in place.  The harnesses are unplugged and then the TITO board easily pulled out since it is just Velcro-ed to the cabinet.  Then shipped back for an exchange.  Incidentally the original board is maintained on both the original product and the new deluxe....simply we are adding an Ethernet port.  ALSO, very important for all to know...if your machine is already configured and working with the original Bettor TITO product, when the Deluxe version is returned, you just have to plug it back in....no additional key-chipping or menu setups on your machine will be required for it to run.

How can I tell what version of SAS my game chips use, I have SG000523 and if they're not 6.0 or > is there another set of chips I could use?

Sit tight - Right now we are testing and compiling solutions -  I'll have an answer for you shortly

[jdkmunch]

Jim, any word when updates will be available?

Jim is away on a business trip - and right now is 30,000 feet above hopefully getting rest after days without sleep.  

But I can answer your question -
A few weeks ago Jim said about two months -  however I'm pleased to say that the first batch will go out for testing within two weeks.   If there are no major problems everyone can start enjoying the product shortly after.  

I'm very excited to get this out.    You will all be very happy with the features.  

[jdkmunch]

Tomorrow I'll post a pic or two of some neat things you can play with using multiple tito deluxe units

[FORDSBS]

Have 2 of these. Need another unit but waiting for new version.

[jdkmunch]

What I love is that each unit is its own web server, this allows you the ability to create your own custom html pages to extract or combine data from the units any way you want.   

[FORDSBS]

Hope testing is going OK.

[jdkmunch]

Better than OK

[jdkmunch]

Right now dozens of units are out in the hands of testers to make sure everyone gets a great experience.    

A compatibility chart is being created.   There are a few OSes where the manufacturer prevents a feature and we want to make sure it is fully documented.    

For example -   on an IGT Reel Touch - SAS does not mute the top box volume -   the slot mutes but the top box does not which allows sound.

However -  the only incompatibilities have been found revolve around volume and mute  -  all other features have worked universally.

[FORDSBS]

The old big mouth is here again. I was lucky enough to be picked as one of the testers. My units came today. @ first I had a problem
connecting to internet, with help they got me straightened out. One number off on my setting it up. 2nd one I had working in about 5 minutes. They are not hard to hookup. I didn't get to play with it other than put credits on & custom ticket. Look forward to playing around with it. I think it's going to be cool.

Thanks to a good instructor.

[Ron (r273)]

The old big mouth is here again. I was lucky enough to be picked as one of the testers. My units came today. @ first I had a problem
connecting to internet, with help they got me straightened out. One number off on my setting it up. 2nd one I had working in about 5 minutes. They are not hard to hookup. I didn't get to play with it other than put credits on & custom ticket. Look forward to playing around with it. I think it's going to be cool.

Thanks to a good instructor.

So I have a chance too, you can teach an old dog new tricks. 

Look forward to buying one soon.

Ron (r273)