Welcome, Guest. Please login or register.
October 31, 2024, 09:17:00 PM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  **Reel Slots** Gaming Machines
| |-+  Bally Electromechanical
| | |-+  Bally EM 1091 - no pay outs
0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: Bally EM 1091 - no pay outs  (Read 2737 times)
rjpohl
Contributing Gold NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 103
Offline Offline

Gender: Male
Posts: 726



WWW
« on: May 09, 2011, 01:07:34 PM »

I was able to get the reels to spin and stop, it takes coins but never pays out.  It is a 3 line machine quarter slot.  There are 2 candles on top.  The one on the leaft (as you face machine) stays on all the time.  Where do I start.  I checked and all 4 fuses are good.  The hopper did run 1 time after I had messed with coil mounted on left side of reel assemble.  Machine is a Super Oranges,  reels are rough and top glass has crack in upper left hand corner. 

thanks
Bob


* Bally1091-reelassy.JPG (134.08 KB, 640x478 - viewed 340 times.)
Logged

Op-Bell
Contributing Gold NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 326
Offline Offline

Gender: Male
Posts: 854



« Reply #1 on: May 19, 2011, 05:51:49 AM »

Sorry, I'm not familiar with that model, but the usual reason for not paying out is one of the contacts on the mechanism breaking current to the reel wiper arms. They are cut off during play so the win relay doesn't give a spurious kick if a path closes momentarily as the reels stop. The usual contacts involved are Reel Mech A-1 and Reel Mech C-1, which are the left and right vertical switches in your picture operated by the mechanical link. It's also cut off by a contact on the handle release relay, which is the coil in your picture. All these contacts should be closed when the mechanism is at rest and the handle release relay is not tripped (it's an electrical trip, mechanical reset).

Logged
frenchmarky
New NLG Member 1 to 100 Post
**

Total Karma Storms: 7
Offline Offline

Posts: 74



« Reply #2 on: May 25, 2011, 01:22:06 AM »

Does the machine have a 'press for change/service' button on the front, and if so does it affect that stuck-on candle?  What color is the one that is always lit and what color is the other one?
Logged
Pages: [1] Go Up Print 
« previous next »
Jump to:  


If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com    Newlifegames.net    Newlifegames.org
   New Life Games    NewLifeGames  NLG  We Bring new Life to old Games    1-888-NLG-SLOTS
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.115 seconds with 20 queries.