Welcome, Guest. Please login or register.
November 23, 2024, 02:51:53 AM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  **Reel Slots** Gaming Machines
| |-+  IGT S and S-plus Reel Games. (Moderator: knagl)
| | |-+  Problems with Hopper limit <7> and Bill acceptor credit limit <7>		 0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: Problems with Hopper limit <7> and Bill acceptor credit limit <7>  (Read 5253 times)
b5srt
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 40
Offline Offline

Posts: 464
« on: April 25, 2011, 08:28:28 PM »
I have a strange problem with programming the hopper limit and Bill acceptor limit. I program each for 2000 and it will retain that settings in the memory / program for a short period of time ( 1 or 2 days ) but then it always goes back to 0400 on both the hopper and credit limits, I have the SP872 chip on a S+ machine, dip switches 1 & 2 are in the on position. All other settings stay in the program I just seem to have trouble with these two Items. I do unplug the machine overnight but I don't think this should effect anything because all other settings are retained. Everything else works great with no issues.  Any thoughts ? Thanks   Scratch Head
Logged
coorslight115
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 79
Offline Offline

Gender: Male
Posts: 2602
« Reply #1 on: April 25, 2011, 09:11:51 PM »
removed...spoke before I thought !


Here is the 872 PSR if it helps
* SP872.doc (216.5 KB - downloaded 204 times.)
« Last Edit: April 25, 2011, 09:17:02 PM by coorslight115 » Logged
coorslight115
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 79
Offline Offline

Gender: Male
Posts: 2602
« Reply #2 on: April 25, 2011, 09:15:47 PM »
[
Logged
b5srt
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 40
Offline Offline

Posts: 464
« Reply #3 on: April 25, 2011, 09:18:09 PM »


Thanks for your reply, I do have instuction manual for the 872 but from what I read if dip switches 1 and 2 are on, it is programable on menu/page <7>
Logged
poppo
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 248
Offline Offline

Gender: Male
Posts: 3266
« Reply #4 on: April 25, 2011, 10:52:31 PM »
How are you dermining that it is resetting to 400?

It may be possible that the MPU battery is low enough to be losing some settings, but not low enough to trigger an error 12. If you have a meter, you may try measuring the battery just to rule that out.

Also check your PM.
Logged
poppo
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 248
Offline Offline

Gender: Male
Posts: 3266
« Reply #5 on: April 25, 2011, 10:55:17 PM »
Quote from: coorslight115 on April 25, 2011, 09:11:51 PM
removed...spoke before I thought !


Clear and set???  rotflmao bust gut laughing

Sorry, couldn't resist.  wave
Logged
coorslight115
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 79
Offline Offline

Gender: Male
Posts: 2602
« Reply #6 on: April 25, 2011, 11:10:56 PM »
Quote from: poppo on April 25, 2011, 10:55:17 PM
Quote from: coorslight115 on April 25, 2011, 09:11:51 PM
removed...spoke before I thought !


Clear and set???  rotflmao bust gut laughing

Sorry, couldn't resist.  wave

NO! not in this case !! Smart A**

Forgot about the dip switches allowing programmable mode when set correctly. Been a while since I played with an older SP chip.
Logged
b5srt
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 40
Offline Offline

Posts: 464
« Reply #7 on: April 25, 2011, 11:20:57 PM »
Quote from: poppo on April 25, 2011, 10:52:31 PM
How are you dermining that it is resetting to 400?

It may be possible that the MPU battery is low enough to be losing some settings, but not low enough to trigger an error 12. If you have a meter, you may try measuring the battery just to rule that out.

Also check your PM.

I know something is fishy when anything over 400 credits start paying out the hopper automatically, then I will go into the programming and both both the <7> hopper limit and credit limits are back at 0400
Logged
poppo
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 248
Offline Offline

Gender: Male
Posts: 3266
« Reply #8 on: April 25, 2011, 11:48:08 PM »
It might also be possible that MPU DIP switch #2 is acting up. Since both 1 & 2 are supposed to be on for programmable mode, if #2 opens up (i.e. after the machine has cooled off) it may be resetting things to 400 when powered up (1 on and 2 off is 400 hopper limit). And since the BV limit can not exceed the hopper limit, it would reset too.  For my part time job, I work on radios that use the same type of dip switches for selecting frequencies and often they do exactly that. So you may try pulling the MPU and flipping DIP switch #2 on and off a few times to try and have it make better contact.
« Last Edit: April 25, 2011, 11:56:49 PM by poppo » Logged
b5srt
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 40
Offline Offline

Posts: 464
« Reply #9 on: April 25, 2011, 11:58:04 PM »
Quote from: poppo on April 25, 2011, 11:48:08 PM
It might also be possible that MPU DIP switch #2 is acting up. Since both 1 & 2 are supposed to be on for programmable mode, if #2 opens up (i.e. after the machine has cooled off) it may be resetting things to 400 when powered up (1 on and 2 off is 400 hopper limit). And since the BV limit can not exceed the hopper limit, it would reset too.  For my part time job, I work on radios that use the same type of dip switches for selecting frequencies and often they do exactly that. So you may try pulling the MPU and flipping DIP switch #2 on and off a few times to try and have it make better contact.

 good suggestion, Thx
Logged
b5srt
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 40
Offline Offline

Posts: 464
« Reply #10 on: April 28, 2011, 05:59:35 PM »
Quote from: poppo on April 25, 2011, 11:48:08 PM
It might also be possible that MPU DIP switch #2 is acting up. Since both 1 & 2 are supposed to be on for programmable mode, if #2 opens up (i.e. after the machine has cooled off) it may be resetting things to 400 when powered up (1 on and 2 off is 400 hopper limit). And since the BV limit can not exceed the hopper limit, it would reset too.  For my part time job, I work on radios that use the same type of dip switches for selecting frequencies and often they do exactly that. So you may try pulling the MPU and flipping DIP switch #2 on and off a few times to try and have it make better contact.

Great diagnostics Poppo my problem seems to have disappeared.   Ecstatic / Top Award Ecstatic / Top Award
Logged
Pages: [1] Go Up Print 
« previous next »
Jump to:  

SimplePortal Classic 2.0.5

If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com ™    Newlifegames.net ™    Newlifegames.org ™
   New Life Games ™    NewLifeGames ™  NLG ™ We Bring new Life to old Games ™    1-888-NLG-SLOTS ™
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.136 seconds with 20 queries.