Rock_Ola 450 and 506 TriVue Wallbox connection issue

[wrkey]

Ok, I have a 450 model that works great. I recently acquired a 506 Tri-Vue wall box and connected it to the rear panel in the jukebox. No worky.

Upon examination, I found that the wires for "most" of the connections on the rear panel are there from the juke box. However, the 25v, Signal and Lock Out wires (1st 3 on the left) are not there.

I need to know where this connection comes from! If you have a 450 with or with out a wall box, please look at the connection panel on your jukebox and see if the connections I am missing are on yours. If so, where do they trace back to? I have one cable that has a 'loop back' plug in it and there is a 25v connection is it.. that I suspect might be what I am looking for. Possibly design to be unplugged and then a connection cable that goes into that plug and to the rear panel. Dunno!

Any help would be appreciated!

[slotsteve]

Been a long time  but I,m betting you need a transformer and maybe a walbox stepper

[wrkey]

You are correct Steve.  After reading your post and doing some research I know I do not have a stepper module.

I think I need a model 1769 for my 450 Jukebox and 506 Tri-Vue.  If anyone can validate, it would be appreciated.

Now I just have to find one... that works... that a reasonable price!

Thanks!

[slotsteve]

we put all that shit in the trash in nj when i ram out of room on last truck full  i,m now looking for seebreg grey boxes  i have atleast 20 that went in trash