Welcome, Guest. Please login or register.
November 21, 2024, 09:10:29 PM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  **Video Slots** Gaming machines
| |-+  SIGMA Video Games.
| | |-+  Sigma SG-1 Will not regester coins		 0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: Sigma SG-1 Will not regester coins  (Read 3700 times)
ellis vial
Guest
« on: February 20, 2012, 07:36:28 PM »
I check the Coin Mech.Inc.CC on the bench and it works,my problem is the machine is not putting out enough voltage to the CC and it is not telling the machine it has recieved a good coin so it will regiester.Does anyone have a manual on the machine or does anyone have any Ideas?The Bill validator works great.
Thanks
Logged
Jim
MIDWEST SLOTS
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 288
Offline Offline

Gender: Male
Posts: 1172


513-984-2201
« Reply #1 on: February 21, 2012, 01:16:09 AM »
like I explained before, the sigma SG-1 is similar to the Sigma B-52 poker machines.  these CC-16 are +12vdc operation.  with an inhibit function.  the machine only puts out +12vdc to the CC-16. the inhibit function is usually pin 1, pin2 is the sense line, 3&4 are not connected, pin5 is the +12vdc, pin 6 is ground.

inhibit is as follows, enable=ground or less than 2.5 vdc,  inhibit =floating or greater than 3.7vdc.

the inhibit allows the mechanism to be disabled (no coin acceptance) without removing power from the mechanism. Grounding pin 1 allows the accept coil armature to operate normally when valid coins are sensed.  floating or applying  a voltage greater than 3.7vdc to pin 1 will disable the accept coil armature and reject coins even though they may be sensed as good ones.

the machine must be inhibiting the CC-16 from accepting coins.

Jim
Logged
MIDWEST SLOTS   Selling Quality Slot Machines since 1995.  We service and repair all types of slot machines. Mills, Jennings, Bally EM, 1000/2000 series, Proslot, 6000. IGT  M, M+ ,S,  S+, S-2000,  I-Game,  Universal,  Video Poker, Sigma.
spuggyroo
New NLG Member 1 to 100 Post
**

Total Karma Storms: 1
Offline Offline

Posts: 26
« Reply #2 on: February 21, 2012, 11:23:41 AM »
Don't know if it helps, but I had the same problem on a Sigma ST-150+ and solved it with a RAM reset.  You might try that.
Logged
ellis vial
Guest
« Reply #3 on: February 21, 2012, 06:59:47 PM »
How do you do that?
Thanks for the response!
Logged
Pages: [1] Go Up Print 
« previous next »
Jump to:  

SimplePortal Classic 2.0.5

If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com ™    Newlifegames.net ™    Newlifegames.org ™
   New Life Games ™    NewLifeGames ™  NLG ™ We Bring new Life to old Games ™    1-888-NLG-SLOTS ™
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.092 seconds with 20 queries.