Welcome, Guest. Please login or register.
October 31, 2024, 08:45:53 PM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  Progressive Controllers, Displays and Slot Toppers
| |-+  Other Progressive Systems.
| | |-+  Data Proc Equipment (DPE) Whazzits for?
0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: Data Proc Equipment (DPE) Whazzits for?  (Read 12304 times)
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447



« on: January 21, 2010, 06:17:43 PM »

Data Proc Equipment
Model NO: 145933304
Board ASSY NO: 7543350
Made by IGT:2005
This one is Revision A :1453304    2/07

Bought it on fleabay for about $15....lol
Has 4 fiber optic connectors on the back.
Plenty of different type machine connectors on the front.
I plugged the power cord in and +5V red LED lights up.
Came with tons of other harnesses as well including cool brand new fiber optics cable.
Anybody have any manual or set-up information on this?
Looks like something fun to figure out and play with...
Here's the front connectors and a photo of the back where the power plug attaches.>>>


* DPE_front_connections.jpg (88.9 KB, 2322x768 - viewed 616 times.)

* DPE_rear_view.jpg (97.64 KB, 1666x768 - viewed 593 times.)
Logged
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447



« Reply #1 on: January 21, 2010, 06:18:40 PM »

Here the top view and board numbers etched into it!
Any of these photos can be enlarged simply by clicking on them!>>>


* DPE_Top View.jpg (49.18 KB, 608x768 - viewed 620 times.)

* DPE_board_numbers.jpg (39.9 KB, 883x768 - viewed 569 times.)
Logged
jay
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 483
Offline Offline

Gender: Male
Posts: 3178


if you cant afford to lose you cant afford to win


« Reply #2 on: January 21, 2010, 10:17:23 PM »

Did you by chance happen to get two of them ????

I am not sure but would suspect that they are for converting from the proprietary serial machine formats (IGT, Ballly etc) to Fiber then from Fiber back to the proprietary protocol.
Logged

The only way to beat the casino is to own it
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447



« Reply #3 on: January 21, 2010, 10:24:08 PM »

Everybody was laughing when it was for sale on ebay and that I should buy it...
Turns out that nobody bid on it and I got it for like $9...total! lol
It came with a brand fiber optic harness that's "paired".
I can ask them if they have more...
What capabilities could it have?
Logged
jay
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 483
Offline Offline

Gender: Male
Posts: 3178


if you cant afford to lose you cant afford to win


« Reply #4 on: January 21, 2010, 10:26:30 PM »

My guess is thats its a fiber mux (transceiver) for the proprietary platforms and you need two of them.
Similar to the Pelco fiber extenders that manage Rs422 or Extended Coaxitron.
Logged

The only way to beat the casino is to own it
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447



« Reply #5 on: January 21, 2010, 10:30:50 PM »

Sounds awesome really...
I gotta go get some longer fiber optic cabling and see what this puppy can do...
I have all kinds of machine boards and parts/stuff that deal with fiber optics.
I need to talk to that friend from Ont. when he gets back from the Olympics!
Logged
a69mopar
647-402-1977
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 600
Offline Offline

Gender: Male
Posts: 3508



WWW
« Reply #6 on: January 21, 2010, 11:22:01 PM »

I have a bunch of them, was supposed to be a complete system, I was told it was for the progressive system, but didn't look at them for long before storing them.

W
Logged

         www.GTASLOTS.com      647-402-1977              BALLY S6000 GALLERY
PWRSTROKE
Resigned NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 246
Offline Offline

Gender: Male
Posts: 1860



« Reply #7 on: January 22, 2010, 12:40:38 AM »

Stout,  Jay is pretty much real close on his opinion on this "Box".  It is pretty much useless in my opinion.  You may be able to play with it and "Frankenstein" into something for a diff. purpose.  I have at least 100 of these with the harnessing etc..  The wires etc. in the kit is the best thing.  This has absouletly nothing to do with making a wap machine work etc..  That is all handled elsewhere in diff. systems.  As far as fiber goes if you have a bunch of short ones you can use a simple fiber junction block-nothing more than a piece of plastic with fittings on it.  If you find a suitable use to your liking for these you are welcome to purchase all the ones I have.  Any fiber driven signal has to have that "INPUT" with the what I call good "data" on it to comm.  I have seen some crazy stuff in the past but I think you will wind up enjoying the parts out of these more than anything.  Your kit should have come with some fiber junction blocks/extenders in it.  B.
Logged
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447



« Reply #8 on: January 22, 2010, 02:36:20 AM »

Powerstroke,
Jay mentioned that I would need two units so they could "talk" to each other...
could I buy one complete unit from you to try and connect it with mine to see what happens?
Logged
a69mopar
647-402-1977
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 600
Offline Offline

Gender: Male
Posts: 3508



WWW
« Reply #9 on: January 22, 2010, 02:38:15 AM »

Damn, he'd probably sell you all of them for a song

W
Logged

         www.GTASLOTS.com      647-402-1977              BALLY S6000 GALLERY
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447



« Reply #10 on: January 22, 2010, 02:41:05 AM »

NO! I have enuff junk! lol Tongue Out
I just want one complete unit... hissy fit

Guess what ...I bought a Universal Board Tester machine and I don't even have a bloody Uni !  Duh!
Logged
PWRSTROKE
Resigned NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 246
Offline Offline

Gender: Male
Posts: 1860



« Reply #11 on: January 22, 2010, 02:46:53 AM »

Stout,  Pm me.  Post another one of those pics of the jap junk boats as it may take that long for me to ship it to you.  Nothing is going to happen when you interlace the two together unless of course you have some type of borg assimulation project going there---- bust gut laughing.  B. Logging off for the night.
Logged
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447



« Reply #12 on: January 22, 2010, 02:50:05 AM »

lol..okay B !
Have a good night...I gotta hit da sack too.
Logged
brichter
Spaced Alien
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 440
Offline Offline

Gender: Male
Posts: 2374



WWW
« Reply #13 on: January 22, 2010, 03:58:55 AM »

What a wuss... New toys and he's going to bed ttth



Me, I'd be up all night  Dancing Party with 'em!



 Crazy rotflmao bust gut laughing Cry Laughing
Logged

Thanks,
Bill
Pages: [1] Go Up Print 
« previous next »
Jump to:  


If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com    Newlifegames.net    Newlifegames.org
   New Life Games    NewLifeGames  NLG  We Bring new Life to old Games    1-888-NLG-SLOTS
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.108 seconds with 20 queries.