Welcome, Guest. Please login or register.
November 22, 2024, 07:56:18 PM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  **Reel Slots** Gaming Machines
| |-+  Bally Reel Games. (Moderator: a69mopar)
| | |-+  Bally E2242 sometimes wheels won't stop spinning, need to pull handle again		 0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: Bally E2242 sometimes wheels won't stop spinning, need to pull handle again  (Read 3666 times)
lmgreen
Guest
« on: January 02, 2010, 05:17:45 PM »
I have a Bally EM model E2242. Sometimes when you pull the handle, the music doesn't start and the wheels don't stop. You need to pull the handle again (sometimes twice) to get it to engage. This seems to happen one out of three pulls. Any help?
Logged
MarkInAz
Jack of all, master on none.
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 22
Offline Offline

Gender: Male
Posts: 344
« Reply #1 on: January 08, 2010, 10:36:05 PM »
Hi lmgreen and welcome to the forum.

Can you elaborate a bit more.  What is the name of your E2242?  My E-2000s don't have sound so help me understand yours.  You insect coins and you pull the handle...   The game does or doesn't do what exactly at each step?

Mark 
Logged
Its Always Something...
FOXSSLOTS1
Resigned NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 323
Offline Offline

Gender: Male
Posts: 1239


Me at work
« Reply #2 on: January 09, 2010, 01:05:45 AM »
if you play a coin - reels spin and you can pull the handle again without inserting a coin - then you need to check the arm and kick switch on the left side of your reel mechanism.
Logged
lmgreen
Guest
« Reply #3 on: January 09, 2010, 10:31:01 AM »
I have an E-series service manual coming Monday or Tuesday. I will check the arm and kick switch once I get the manual. I also noticed that when the handle goes back up, it seems to stick. Looking inside thae machine, it appears there is a stop that is worn and that is where it is sticking. Anything I should be concerned about. It doesn't take too much force to pull the handle.
Thanks for the replies.
Logged
lmgreen
Guest
« Reply #4 on: January 17, 2010, 06:05:30 PM »
it was in fact, an adjustment on the arm switch.
Thanks for the help. All is alot easier now with the service manual.
Logged
Pages: [1] Go Up Print 
« previous next »
Jump to:  

SimplePortal Classic 2.0.5

If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com ™    Newlifegames.net ™    Newlifegames.org ™
   New Life Games ™    NewLifeGames ™  NLG ™ We Bring new Life to old Games ™    1-888-NLG-SLOTS ™
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.1 seconds with 20 queries.