Pinball Barcrest Can´t Set

[Mathias]

I need urgent the configuration procedure for the Pinball barcrest , i have the set 19 and the set 53 , but dont know the details or the correct procedure , i set the machine like this.

Clear the machine
Put the base and receive the 61 1 and then the 65 1
Put the set 19 and configure The token (15) in 4 (25c the credit)
                                         Validator enable (17 1)
                                         Token bill (20 01)
                                         Token value (25)

when i put the base to put the 5  7 like in the others reel s+ the 5  7 does not apear and dont take the changes.

Please help me with this .
Thanks in advance                                         

[knagl]

Mathias-

What is the SP ("GAME PROM") chip in your game?

If you don't know, you can look at the label on the SP chip, or you can follow the directions found here.  Please let us know what SP chip you have, and we can try to further assist you. 

[Mathias]

SP 1106 TYPE 32
SS 8023 TYPE 32

Thanks in advance

[knagl]

I just sent you an e-mail with the PSR for the SP1106.

 


According to the PSR, you need to use a SET053 or SET057 chip with that GAME (SP) chip.  You said you have a SET053, so you should use that chip.

There is nothing in the PSR that indicates that it supports the SET019 or tokenization -- you may not be able to tokenize this game, at least not with the SP1106.

[Mathias]

Ok thanks , so i will have to find a SP for 4 credits per token (0,25c)
if you know where i can get it please let me know
Thank you for all the help.

[knagl]

I'm not aware of any type 32 SP chips that support tokenization. 

Perhaps someone else knows of one, but you may have to settle for that game not being tokenized.  I wish I had better news, sorry.

[Mathias]

No problem , you were a very BIG help in this , thank you for the time spend